A revised BIONZ XR engine greatly benefits image processing capabilities throughout the camera system, including up to 8x faster processing, greatly reduced rolling shutter, and more fluent interface and file management handling speeds.
- Efficient sensor design and processing enables high-speed shooting up to 30 fps at full 50.1MP resolution, with full AF and AE capabilities, when working with an electronic shutter. When working with the mechanical shutter, speeds are still kept high at 10 fps. Also, a large buffer memory permits recording up to 155 compressed raw frames, or 165 JPEGs, in one single burst at 30 fps.
- Suiting fast-paced continuous shooting is a blackout-free viewfinder experience, which makes use of a 240 fps refresh rate for fluent eye-level viewing.
- Updated electronic shutter offers silent, vibration-free performance and also supports anti-flicker shooting for working under fluorescent, LED, or other flicker-prone types of artificial light, even while shooting at 30 fps with 120 fps AF speeds.
- Due to quickened readout speeds, electronic shutter flash sync is possible up to 1/200 sec. Even faster flash sync speeds are available when using the updated mechanical shutter, too, which can sync at 1/400 sec in full-frame or 1/500 secwith an APS-C crop.
- Making use of the high-resolution sensor and fast processing capabilities, UHD 8K 30p XAVC HS 10-bit 4:2:2 video recording is possible using the full width of the sensor, offering 8.6K oversampling for impressive sharpness and realism. For easy handling of this high-res recording mode, low bit-rate proxy files with HD resolution can be simultaneously recorded faster for playback. Also, 8K video at 400 Mb/s can be written to a V90-rated UHS-II SD card, or 200 Mb/s to a V60 card, and 8K can be output over HDMI in 8-bit 4:2:0 format.
- Recording up to UHD 4K is possible with frame rates up to 120p; when recording up to 60p the a1 offers full pixel readout and at 120p it uses a 10% crop. Oversampled 4K recording is also possible, via a 5.8K capture area, with a Super 35 crop. Internal 10-bit 4:2:2 sampling is also possible in all recording modes and, if recording externally via the full-size HDMI A port, 16-bit raw output is also possible from a 4.3K capture for even greater tonal reproduction and post-production flexibility.
- The a1 employs a pair of codecs to suit different workflows: XAVC HS, which uses HEVC/H.265 encoding to retain more detail at smaller bitrates and XAVC S-I, which is an intraframe codec for consistent performance and quality at bitrates up to 600 Mb/s.
- High-speed, 120 fps recording also enables 4x and 5x slow-motion movie recording with the frame rate playback set to either 30p or 24p or, if moving down to Full HD resolution, an effective 240p frame rate is also available for even greater motion control.
- No recording time limit allows for unlimited clip lengths and the camera's physical design features an improved heat-dissipating structure to promote longer possible recording times; longer than 30 minutes for 8K 30p or 4K 60p videos, or recordings done at 10-bit 4:2:0.
- S-Cinetone can be used to deliver distinct colors and healthy-looking skin tone rendering that matches the FX9 and FX6 cameras and is based on technology from the professional Cinema Line cameras, such as the VENICE. This color profile offers natural mid-tones, soft colors, and especially well-controlled highlights.
- Affording extensive customizable color and gamma controls, the you can adjust the gamma, black level, knee, color level, and more. Also, users can use the same S-Log2 Gamma Curve that is found on high end Sony Cinema cameras that squeezes up to 1300% more dynamic range into the video signal then traditional REC709, for increased post-production flexibility.
- HLG (Hybrid Log-Gamma) support is also available, along with the BT.2020 color space, for recording within a wide color gamut and, in addition to S-Log2, S-Log3 is also available for producing a 15+-stop dynamic range with increased grading control in the shadow to mid-tone regions of the image.
- Covering 92% of the image area, a Fast Hybrid AF system incorporates 759 phase-detection points along with 425 contrast-detection areas for quick and precise focusing in a variety of lighting conditions with sensitivity down to -6 EV. This focusing system is available for use in all recording modes, to benefit both video and stills applications.
- Fast sensor readout and improved processing also enables up to 120 AF and AE calculations to be performed per second for faster, more responsive tracking and accurate results.
- Lock onto subjects quickly using Real-time Tracking for AI-based tracking on moving subjects or touch tracking for manual selection of the subject.
- Real-time Eye AF, suitable for both humans and animals, also ensures critical sharpness when shooting portraits.
- Dedicated Real-time Eye AF Bird Mode lets you select the bird to be tracked and the camera will automatically detect the bird's eye and track it, regardless if the bird is in flight or still. This mode even works once a sitting bird takes flight.
- Helping to fine-tune how the focusing system performs, seven-step AF transition speed and five-step AF subject shift sensitivity controls let you refine how quickly focus shifts from point to point and how smoothly focusing shifts occur.
- An impressive QXGA OLED Tru-Finder EVF features a high 9.44m-dot resolution and 0.9x magnification for exceptionally bright, clear, and detailed eye-level viewing.
- The EVF has a dedicated 240 fps High Quality+ setting for smooth motion rendering and the finder's physical design has a long 25mm eye point, 41° field of view, and features a fluorine coating on the outermost viewfinder element to benefit cleaning.
- A 3.0" 1.44m-dot tilting screen benefits working from high and low angles. This LCD is a touchscreen, too, for intuitive shooting control and menu navigation.
- Updated menu structure is more intuitive and complements having different workflows and settings selections for movie recording and stills shooting. The menu system also works in conjunction with the touchscreen design of the rear LCD.
- Dual memory card slots both accept either CFexpress Type A or SD-type memory cards. The dual slot design allows for flexible file saving and handling and can be configured to partition file types or can be used for overflow recording. Additionally, both of the card slots are rated to support UHS-II memory cards for faster transfer speeds.
- Accepts the high-capacity NP-FZ100 rechargeable lithium-ion battery, which provides approximately 430 shots/90 minutes of recording per charge when using the viewfinder or 530 shots/95 minutes of recording per charge when using the rear LCD.
- Enhanced 5.5-stop effective 5-axis SteadyShot INSIDE image stabilization system compensates for five different types of camera shake encountered during handheld shooting of stills and video. Additionally, specifically for video, there is also an Active IS mode that adds even more precise stabilization methods for even smoother footage straight out of camera.
- Magnesium alloy chassis assures rigidity, durability, and stability while remaining lightweight. The lens mount has also been improved to better support heavy lenses, and the grip rigidity has been improved for more comfortable hand-holding.
- Extensive weather-sealing, including enhanced sealing around the battery cover, terminal cover, and chassis joints, has been employed to resist dust and moisture for reliable operation in harsh weather conditions.
- Full-size HDMI A port offers a more reliable connection when working with external recorders.
- A USB 3.2 Gen 1 Type-C port has been added, in addition to a micro-USB port, for faster, more reliable tethering support. The USB Type-C connection allows the camera to be charged or powered from the host power source while connected.
- PC sync terminal for wired flash sync with strobe packs or wireless radio remotes.
- Both 3.5mm headphone and external microphone ports facilitate greater control over audio recording.
- Multi Interface Shoe supports working with the optional ECM-B1M Shotgun Microphone or XLR-K3M XLR Adapter Kit, which provide improved, clear audio recording sound by sending a digital audio signal to the camera, opposed to an analog signal.
- Ethernet port supports 1000BASE-T wired LAN connection for transferring files over FTP.
- Built-in Wi-Fi and NFC enables the a1 to instantly share imagery to mobile devices for direct sharing online, and support for both 2.4 and 5 GHz bands also enables wireless tethered shooting support. Also, the 5 GHz band supports 2x2 MIMO for fast communication speeds and dual antennas ensure a reliable connection.
- Bluetooth connectivity allows for location data acquisition.
- Ethernet port offers up to 1000BASE-T speeds for quick wired LAN sharing and remote operation.
- When working over a wired LAN, the Remote Camera Tool 2.1 app now has been enhanced for a reduced release time lag and live view delays as well as support for remote SD card formatting, FTP server switching, and changes to the still image storage destination. Wired or wireless LAN transfers can also occur in the background, while continuing to shoot.
- Imaging Edge Remote for desktop supports PC Remote shooting via the Wi-Fi connection or tethered by the wired USB Type-C port. An updated data transfer control also makes it possible to transfer files from an SD card over Wi-Fi using the Imaging Edge Mobile app even when the camera is powered off.
- Transfer & Tagging add-on app can send FTP setting parameters from your mobile device to the camera, offers automatic data upload to an FTP server with attached metadata, and can perform automatic voice-to-text conversion.
The Retrospective 7M Shoulder Bag from Think Tank Photo stores and protects your DSLR or mirrorless camera with an attached 24-70mm lens, an additional 70-200mm lens, a flash, and accessories. Alternatively, it accommodates a small drone with controller and accessories. Designed to look like a shoulder bag rather than a camera bag for a low profile, it offers dedicated compartments for your camera gear.
Made from durable and water-resistant cotton canvas, it has a large flap with dual turn buckles to keep it securely closed. The interior is lined with nylon and padded with closed-cell foam for protection. The main compartment has padded touch-fastening PE-reinforced dividers for organizing your gear. A large pocket under the flap stores and organizes memory cards, cables, your wallet, keys, and more.
A rear pocket enables quick access to documents, maps, boarding passes, and notebooks. The exterior water bottle accessory pocket collapses and compresses to the bag with the integrated strap for a streamlined profile. A simple webbing rail accommodates modular pouches or a carabineer, so you can further customize the bag to your needs. Carry the Retrospective 7M with the padded removable top handle, or wear it using the adjustable padded shoulder strap. You can also attach it to the handle of a rolling carry-on bag. To further protect your valuable gear, a seam-sealed rain cover is included for wet weather conditions.
Experience the CFexpress 4.0 advantage and capture 8K raw cinema-quality video with the 256GB Professional GOLD CFexpress 4.0 Type A Memory Card from Lexar, which delivers read speeds of up to 1800 MB/s, write speeds of up to 1650 MB/s, and sustained write speeds of 1400 MB/s, all of which help to expedite post-production. Additionally, thanks to its VPG-400 rating, write speeds are guaranteed not to drop below 400 MB/s. Also featured is 8-point protection against temperatures, vibration, wear-out, dust and water (IP68), drops, shocks, compression, and bends. Protection is provided by a limited lifetime warranty and data recovery software.
Quickly transfer 4K video and other large files to your computer using the CFexpress Type A and UHS-II SD Card Reader from Xcellon. This card reader features a CFexpress Type A card slot, a UHS-II SD card slot, and operates using the 10 Gb/s USB 3.2 Gen 2 standard. Connectivity to the host system is established using the USB-C interface, as well as included USB-C to USB-C and USB-C to USB-A cables. Plug-and-play connectivity means that no additional drivers are required. Power is provided via the host system's USB port. An aluminum enclosure helps dissipate heat and keep things cool, and a nonslip rubber base helps keep the card reader in place on your desk. Thanks to push-lock security, cards are secured in their individual slots and LED indicators provide visual cues for power and data processing.
The 7.2 VDC, 2280mAh NP-FZ100 Battery from Sony is a high-capacity Z-series power source for select digital cameras. This battery has InfoLITHIUM support for displaying the remaining charge of the battery on the camera's LCD screen.
Sony a1 II
Sony a9 III
Sony a9 II
Sony a9
Sony a7S III
Sony a7R V
Sony a7R IVA
Sony a7R IV
Sony a7R IIIA
Sony a7R III
Sony a7CR
Sony a7C II
Sony a7C
Sony a7 V
Sony a7 IV
Sony a7 III
Sony a6700
Sony a6600
Sony ZV-E1
Sony ZV-E10 II
Sony FX3A
Sony FX3
Sony FX2
Sony FX30
