Video Chat with a Pro Audio Expert - Live

Telex WM-1000 - Single-Channel Wall Mount Headset Station

BH #TEWM1000 • MFR #F.01U.118.639
Print
Telex WM-1000 - Single-Channel Wall Mount Headset Station
No Longer Available
No Store Display
Ask an Expert
800-606-6969

Telex WM-1000 Overview

The Telex WM-1000 is a professional single-channel wall mount headset station for wired intercoms, accepting either party line or local power, and mounting in a standard doublewide type electrical outlet box.

The WM-1000 is equipped with a mic limiter circuit, back-lit control buttons for low-light operation, Talk and Listen buttons with momentary/latching operation, and monitoring volume control. The Call send button offers a call receive indicator light, and a Call receive beep tone is available with an on/off selector.

The WM-1000 also provides a dedicated Mic kill receive with on/off selection, Side Tone trim control, and quick-connect wire clamp terminals for party line wire connections. The 4-pin male XLR connector accepts headsets with balanced or unbalanced microphones, and is Clear-Com compatible.

Wall mount headset stations for wired intercoms with Audiocom and Clear-Com compatibility
Accepts local power supply or remote party line phantom power
Backlit Momentary or hands-free Latching selectable listen key
Backlit Call key for call signal send, incoming call indication
Backlit Momentary and Latching Talk key
4-pin XLR headset connector accepts Monaural headphones and balanced or unbalanced dynamic microphones
Mic kill receive feature allows remote operator to turn off talk key
Front panel volume control, internal configuration DIP switches, sidetone trim control and Audiocom/Clear-Com selector switch

Telex WM-1000 Specs

Frequency Response
100 Hz - 20kHz
Gain
35dB Adjustable Range (sidetone)
Microphone Input Type
4-pin XLR Male (Headset Only)
Limiter
Yes, built-in
Power Output
1 Vrms nominal
Speaker
No
SPL
Not Applicable
Signal-to-Noise Ratio
<-70dB
THD + N
Not Specified by Manufacturer
Panel Microphone Preamp
No
Program Amplifier
Not Specified by Manufacturer
Speaker Amplifier
No
Input Level
Not Specified by Manufacturer
Input Impedance
50 - 200 Ohms(Headset Microphone)
150 - 600 Ohms(Headphones)
Internal Connectors
Six-position Terminal Block (screw-in wire clamps)
Internal Controls
2 x Sidetone Trim
3 x Call Beep/DC Call Enable/Headset Mic Type Dip Switches
1 x Audiocom/Clearcom Selector Switch
Front Panel Controls and Indicators
1 x Volume Knob
1 x Listen Button
1 x Call Button
1 x Talk Button
Power Requirements
Local: 12 - 15VDC, 65 to 150mA
Phantom: 24VDC nominal, 65 to 150mA
Dimensions
Mounts in standard two-gang electrical box
Weight
Not Specified by Manufacturer
Packaging Info
Package Weight
1 lb
Box Dimensions (LxWxH)
6.5 x 6.4 x 5"

Telex WM-1000 Reviews

See any errors on this page?
Whatever You Need, We've Got It