Screw on metal hood for standard and telephoto lenses.
UPC: 009219044201
Ask Our Experts877-717-9890
Hello, Log InAccount & Orders
Video Chat with a Photography Expert - Live
In Stock
Protect Your Gear
Add a protection plan from $5.99
See Options
Kalt Metal Lens Hood Overview
Kalt Metal Lens Hood Reviews
Works well
By Andy
Rated 5 out of 5
Date: 2022-03-22
This metal lens hood screws on and looks good.
Affordable Lens Hood
By Keith
Rated 5 out of 5
Date: 2020-05-12
Nicer than plastic, but reasonably priced. Screws on like a filter would, so lens cap may no longer fit, but with a UV filter in place, you don’t need a cap. The hood is securely attached without the need to overly tighten.
See any errors on this page?
is this compatible with Nikon 70-200 f4, does it p
is this compatible with Nikon 70-200 f4, does it prevent flaring?
The Kalt 67mm Metal Lens Hood can work with the Nikon AF-S NIKKOR 70-200mm f/4G ED VR Lens. The Nikon lens hood specifically designed for this lens will be more effective at reducing flare. It is the Nikon HB-60 Bayonet Lens Hood for the NIKKOR 70-200mm F/4G ED VR Lens, BH #NIHB60 (https://bhpho.to/4yNu1Hn).
Date published: 2026-10-14
I have a Nikkor 24-200 zoom lens. Will this hood ...
I have a Nikkor 24-200 zoom lens. Will this hood cause vignetting at the shorter focal lengths, such as 24-50?
The Kalt 67mm Metal Lens Hood will fit the Nikon NIKKOR Z 24-200mm f/4-6.3 VR Lens but will cause vignetting. The Nikon HB-93 Bayonet Lens Hood is designed for that lens and is included. If you need an extra here is the link: https://bhpho.to/2Xdjp8b
Date published: 2021-12-04
will this work on a 45mm lens
will this work on a 45mm lens
Yes, if your lens has a 67mm thread.
Date published: 2020-06-25
Will this work on Panasonic Lumix DMC-G85. ...
Will this work on Panasonic Lumix DMC-G85. 100-300mm lens?
Yes the Kalt 67mm Metal Lens Hood is compatible on the Panasonic Lumix G Vario 100-300mm f/4-5.6 II POWER O.I.S. Lens.
A longer one would be better on that lens like this, https://bhpho.to/3FqJMcI .
Date published: 2022-05-05
question
What is the Diameter at the OPEN END of the lens hood, i.e. the diameter to put a LENS CAP on it?I assume it is 72mm - if so then you might re consider the advice to buy a 67mm lens cap as an accessory to this item . . . that's confusing, at least to me.ThanksWilliam
This lens hood was not designed to hold a lens cap.
Date published: 2020-06-18
Will it accept 58mm center pinch cap?
Will it accept 58mm center pinch cap?
It is not threaded for a 58mm pinch cap.
Date published: 2019-06-26
question
Can this be used on the Fujinon 14mm and 18-55mm?
There will be vignetting on the wide end.
Date published: 2018-08-27
question
What is the length from the top to bottom?What is the outside diameter?Thanks!
The length is approximately 21mm not including the threads. 24mm total. The diameter is 65mm (2-1/2 ).cheers, -bill
Date published: 2018-08-27