Video Chat with a Pro Audio Expert - Live

Sanken CUB-01 Boundary Microphone (Gray)

BH #SACUB01PTG • MFR #CUB-01-PT-GY
Print
Sanken CUB-01 Boundary Microphone (Gray)
In Stock
No Store Display
Free Expedited Shipping
Protect Your Gear
Add a protection plan from $58.99
Ask an Expert
800-606-6969

Sanken CUB-01 Overview

The gray CUB-01-PT from Sanken is a boundary microphone that features a small profile while delivering a sound synonymous with large diaphragm microphones. The CUB-01-PT is an excellent choice for conferences, boardrooms, courtrooms, news broadcasts, film and more. The microphone features a unique square-shaped cardioid capsule, which significantly enlarges the area of the diaphragm. This proprietary design results in a rich, natural, "full-bodied" sound quality that is often associated with large diaphragm condenser microphones.

The CUB-01 is easily installed into any surface with minimal effort and its miniature profile renders the microphone inconspicuous. The wide frequency response effectively reproduces speech, instruments and ambiance. The cardioid polar pattern effectively minimizes off-axis noise and ambiance while providing a focused pick up.

Hemispherical - Cardioid Polar Pattern
The CUB-01-PT features a cardioid pick up pattern at the upper-hemisphere of the capsule. The result is excellent noise and phase suppression at the surface while maintaining a generous pick up area at the top.
Miniature Design
The miniature design results in inconspicuous, low profile microphone placement.
Square Capsule Design
The square diaphragm results in a larger diaphragm area. The result is a sound quality synonymous with large diaphragm condenser microphones.
Unterminated (Pig-Tail) Connection
This model is unterminated allowing users to custom wire desired connectors.

Sanken CUB-01 Specs

Key Specs
Microphone Type
Boundary
Polar Pattern
Cardioid
Element Type
Electret Condenser
Controls
None
Frequency Response
20 Hz to 20 kHz
Maximum SPL
127 dB
Analog Output
1x Pigtail/Unterminated
Microphone
Microphone Type
Boundary
Polar Pattern
Cardioid
Element Type
Electret Condenser
Sound Field
Mono
Orientation
N/A to Boundary Mics
Controls
None
Performance
Frequency Response
20 Hz to 20 kHz
Maximum SPL
127 dB
Sensitivity
15 mV/Pa
16.8 mV/Pa
Equivalent Noise Level
17 dB (A-Weighted)
16 dB (A-Weighted)
Connectivity
Analog Output Connector
1x Pigtail/Unterminated
Power
Operating Voltage
Not Specified by Manufacturer
Physical
Color
Gray
Weight
1.6 oz / 45 g
Packaging Info
Package Weight
0.65 lb
Box Dimensions (LxWxH)
8.4 x 4.8 x 2"

Sanken CUB-01 Reviews

Boundary? Maybe not.

By AlanB
Rated 3 out of 5
Date: 2013-12-07

The description of the CUB-01 is somewhat misleading. The cardioid pattern is not vertical but horizontal. The pickup pattern is sideways in one direction. This makes the mic not suitable for plopping down in the middle of a table surrounded by people speaking or sticking it to the headliner of a car. The directionality is roughly indicated by the polar pattern badge on top of the mic. I say roughly because on the one I tested the pattern was off by about 20 degrees clockwise. To mic two people in a car well you would need a CUB-01 for each person. The CUB-01 doesn't function like a boundary layer microphone to my ears. There is no discernible difference in room reverberation whether the mic is on or off a surface nor is there a boost in higher frequencies. For me it sounds more like a boundary mic if placed upside down on a hard surface. It's a good sounding mic useful mainly as a directional plant mic in my opinion. I am a film sound recordist with many years of experience.

very good mike from sanken

By northwind
Rated 4 out of 5
Date: 2012-06-28

I use it to record dialogue in cars

See any errors on this page?

Can you put a 3.5mm end on this mic?

Can you put a 3.5mm end on this mic?
Asked by: Matthew
The Sanken CUB-01 Boundary Microphone could theoretically be terminated in a 3.5mm TRS connector. Just keep in mind the power requirement of 3 to 10 VDC.
Answered by: Calvin M
Date published: 2023-12-31

Can I wire a 3.5mm end to this?

Can I wire a 3.5mm end to this?
Asked by: Matthew
Yes, the CUB-01 Boundary Microphone (Beige) comes unterminated and can be terminated with a 3.5mm TRS connector.
Answered by: Alex D
Date published: 2023-12-31
  • y_2026, m_8, d_24, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_425221, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_bhphotovideo
Whatever You Need, We've Got It