Velodyne Acoustics Impact-10 250W Self-Powered Subwoofer (Black Ash)

BH #VEIMPACT10 • MFR #80-IMP10B
Print
Velodyne Acoustics Impact-10 250W Self-Powered Subwoofer (Black Ash)
Key Features
  • Maximum Dynamic Power Amplification
  • Active 10" Woofer Assembly
  • Down-Firing Port
  • 2" Copper-Wound Voice Coils
With its continued excellence in high performance bass reproduction Velodyne introduces the Impact-10 Self-Powered Subwoofer. Designed for both professional and home entertainment enthusiasts with the capability to deliver a full, clear, and tight low-frequency response with its Maximum Dynamic Power (MDP) amplification. Its unique design features an active 10" front-firing fiber cone, down-firing port, 2" dual-layer copper-wound voice coils, 150W RMS/250W peak power, and a beefy 89.6 oz magnet structure - this powerful combination enables this sub to reproduce the tightest "punch" at the highest sound levels in its class.

In addition, it features low and high-pass crossovers, 0° or 180° phase adjustment, line-level/LFE/speaker level inputs, and a wide range of frequencies with superb sound quality and low distortion. With its compact cube design, it's perfect for home theater, whole house audio systems, and anywhere high quality, compact bass projection is required.

More Details
No Longer Available
No Store Display
Ask an Expert
800-606-6969

Velodyne Acoustics Impact-10 Overview

With its continued excellence in high performance bass reproduction Velodyne introduces the Impact-10 Self-Powered Subwoofer. Designed for both professional and home entertainment enthusiasts with the capability to deliver a full, clear, and tight low-frequency response with its Maximum Dynamic Power (MDP) amplification. Its unique design features an active 10" front-firing fiber cone, down-firing port, 2" dual-layer copper-wound voice coils, 150W RMS/250W peak power, and a beefy 89.6 oz magnet structure - this powerful combination enables this sub to reproduce the tightest "punch" at the highest sound levels in its class.

In addition, it features low and high-pass crossovers, 0° or 180° phase adjustment, line-level/LFE/speaker level inputs, and a wide range of frequencies with superb sound quality and low distortion. With its compact cube design, it's perfect for home theater, whole house audio systems, and anywhere high quality, compact bass projection is required.

Maximum Dynamic Power (MDP) Amplification
Designed with Velodyne's MDP technology, this subwoofer is capable of reproducing well defined bass tones that will enhance the overall sound value of any soundtrack with lower distortion.
Dual-Layer Copper-Wound Voice Coils
Developed with 2" dual-layer copper-wound voice coils; this subwoofer assures linear travel and allows for heat dissipation throughout the enclosure.
10" Woofer Assembly
Its 10" coated fiber cone woofer with an 8.2" piston diameter reproduces demanding home theater soundtracks and music with authority, accuracy and low distortion.
Low-Frequency Response
With a frequency response of 32 - 140Hz, this subwoofer offers a full range of low-frequencies with the capability of reproducing a very tight bass-response throughout your home theater.
Auto Turn On Function
If a signal is not detected for approximately 8 minutes, the subwoofer will switch to standby mode, which in turn will draw minimal power.
Phase Adjustment
This subwoofer can easily blend into your existing system with its built-in adjustable (50 - 200Hz) high-pass crossover, and selectable phase control.
Features and Controls
This subwoofer offers line level, speaker level inputs and outputs, LFE input, LED power indicator, removable front grille, and rear panel volume control.

Velodyne Acoustics Impact-10 Specs

Sub-Woofer
Type
Active
Power Rating
150W RMS/250W Peak
Frequency Response
32 - 140Hz (±3dB)
Crossover Frequency
Low-Pass: 50 - 200Hz
High-Pass: Full Range
Phase
0° or 180° (Adjustable)
Magnetic Characteristics
89.6 oz (5.6 lbs)
Impedance
Not Specified By Manufacturer
Drivers
10" (165.1mm) Coated Fiber Cone
Enclosure
Ported
Inputs
Speaker Level, LFE, Line Level (RCA)
Outputs
Stereo, left/right, Speaker Level
Shielded
No
General
Dimensions
13.75 x 12.75 x 14.4" (349.2 x 323.8 x 365.7mm)
Shipping Weight
30 lbs (13.6kg)
Power Requirements
120V, 60 Hz AC
Color
Black Ash
Packaging Info
Package Weight
24.5 lb
Box Dimensions (LxWxH)
17.7 x 17 x 16.5"

Velodyne Acoustics Impact-10 Reviews

See any errors on this page?
Whatever You Need, We've Got It