Creek Evolution EVO 50A V2 High Resolution Amplifier with Remote (Silver)

BH #CRE50AV2R • MFR #EVOLUTION EVO 50A V2
Print
Creek Evolution EVO 50A V2 High Resolution Amplifier with Remote (Silver)
Key Features
  • High Performance Power Amplifier
  • 55W Per Channel at 8 Ohms
  • 85W Per Channel at 4 Ohms
  • Five Sets of Stereo Inputs
The silver Evolution EVO 50A V2 from Creek is a high-resolution power amplifier with a full featured preamp section offering multiple inputs, electronic balance & tone controls, and a wireless IR remote. The amplifier is capable of driving 8 ohm speakers with 55W of power and 4 ohm speakers at 85W of power. 
More Details
No Longer Available
No Store Display
Ask an Expert
800-606-6969

Creek EVOLUTION EVO 50A V2 Overview

The silver Evolution EVO 50A V2 from Creek is a high-resolution power amplifier with a full featured preamp section offering multiple inputs, electronic balance & tone controls, and a wireless IR remote. The amplifier is capable of driving 8 ohm speakers with 55W of power and 4 ohm speakers at 85W of power. 

The amplifier uses a pair of Sanken 15A bi-polar transistor circuits with very high open-loop gain and low distortion. This circuit features built-in thermal compensation offering rapid bias tracking performance and a very low output impedance, capable of producing high output currents with exceptional speed and control. The power supply uses a massive 250W toroidal mains transformer with separate windings for low and high current analog and digital circuitry.  By using several low impedance capacitors together, an ultra-high specification capacitor is created to smooth the DC and produce a very powerful and accurate sound. 

There are five sets of inputs on the rear of the unit, each offering stereo RCA connections with input 4 also offering balanced XLR inputs. Additionally, input 1 can be configured with an optional Sequel plug-in phono pre-amp for connecting a turntable. Inputs 3 and 4 offer a "Direct A/V" setting, which bypasses the internal pre-amp and volume control when creating a multi-channel AV system. Input 5 features a "Smart-Slot," which may be fitted with the optional plug-in AMBIT analog AM/FM radio tuner or the RUBY, an optional plug-in DAC with SPDIF, TOSLINK, USB, Bluetooth, and FM Radio inputs. The pre-amp output replicates the internal power amplifier section which includes all preamp controls and may be used to drive a suitable pair of loudspeakers or to connect an active sub-woofer.

Remote Input/Output connections are offered for connecting additional EVO 50 range products, such as the Evolution 50CD DAC/CD/Pre-amp, which elevates the performance to an even higher level.  The EVO 50A ships with an IR wireless remote and an IEC power cable.

EVO 50A
  • Organic LED display (OLED) for high resolution graphic symbols
  • Electronic volume control
  • Bass and treble controls
  • Left and right balance control
  • Multiple input options switched electronically or via gold contact relays
  • Speaker Connectors: Bare wire, 4mm plugs, or spade lug connectors
Optional Upgrades
  • Sequel 2 phono pre-amp circuit
  • AMBIT AM/FM analog radio tuner module
  • Ruby SPIDIF, TOSLINK, USB, Bluetooth, and FM tuner module

Creek EVOLUTION EVO 50A V2 Specs

Power Output
Power Output @ 1% THD: >55 W into 8 Ohms, both channels driven
Power Output @ 1% THD: >85 W into 4 Ohms, both channels driven
Output Current
Continuous Output Current: >8.5 A (sine wave)
Peak Output Current, Burst into 0.5 Ohms: ±26 A
THD & Noise
2/3 Rated Power 8 Ohms: < 0.005% (20 Hz to 20 kHz)
Signal to Noise Ratio
Line Input: 102 dBA
Frequency Response
Line: <10Hz to >100 kHz ±2 dB
Balanced: <10Hz to >50 kHz ±2 dB
Gain
Gain at 1 kHz Unbalanced: 33.3 dB (x 46)
Gain at 1 kHz Balanced: 27.0 dB (x 22.5)
Input Sensitivity
Line Level: 410 mV
Maximum Voltage
Maximum Input Voltage, RCA and Balanced (XLR): 5.4 V and 10.8 V RMS
Crosstalk
-80dB at 1 kHz
DC Offset
< ±10mV
Slew Rate
> 30 V per µS
Pre-amp
Pre-Amp Inputs: 5 x RCA unbalanced, 1x Balanced XLR
Power Amp
Power Amp Inputs : Input 3 and 4 via RCA or XLR
Inputs 3 & 4 can be assigned as power amp direct inputs
Remote I/O
Remote In Jack: Powered output for external IR sensor or serial connection to Evo products
Remote Out Jack: Serial connection to other Evo system components
Loudspeaker
Loudspeaker Outputs: 1 pair of binding posts for use with spade lugs, 4 mm plugs, or bare wire
Output Impedance
<0.1 Ohms at 1 kHz
Headphone Output
1 x 1/4" / 6.3 mm with low impedance output (<50 Ohms)
Finish
Silver
Mains Voltage
115/230 VAC 50/60 Hz, switchable
Power Consumption
Idle: <20 Watts
Max: 350 Watt
Standby: No standby
Dimensions
17 x 2.3 x 11" / 430 x 60 x 280 mm (includes feet and knobs)
Weight
16.5 lb / 7.5 kg

Creek EVOLUTION EVO 50A V2 Reviews

See any errors on this page?
Whatever You Need, We've Got It