Brickcom MB-200A Series 2MP IR Day/Night Full HD Indoor Mini Box Network Camera with PoE, 2-Way Audio, & 4mm Fixed Lens

BH #BRMB200AP • MFR #MB-200AP
Print
Brickcom MB-200A Series 2MP IR Day/Night Full HD Indoor Mini Box Network Camera with PoE, 2-Way Audio, & 4mm Fixed Lens
No Longer Available
No Store Display
Ask an Expert
800-606-6969

Brickcom MB-200Ap Overview

The MB-200A Series 2MP IR Day/Night Full HD Indoor Mini Box Network Camera with PoE, 2-Way Audio, & 4mm Fixed Lens from Brickcom features a 1/2.5” sensor and is capable of recording in up to 1920 x 1080 at 30 fps. It serves as an indoor video surveillance solution for residences and small businesses. Thanks to the EasyLink feature, which allows for plug-and-play capability, this camera can be used in a standalone configuration with any home or small business network.

The camera supports multiple streaming of formats such as H.264, Motion JPEG, and MPEG-4. This day/night camera features a mechanical IR cut filter that allows recording in color with illumination levels as low as 2 lux. When the illumination levels go below 2 lux, the camera switches to the night mode and records in B&W with 30 IR LEDs.

The MB-200AP Camera features an intelligent multi-profile sensor management feature that allows you to configure image parameters for different environments. Moreover, it supports DI/DO for an external alarm device. When integrated with a power battery pack and a memory card (not included), this camera is capable of supporting edge recording that allows it to continue recording and store the data to the SD/SDHC card when the network or power connection is interrupted.

The 2MP box camera features an Ethernet port with PoE capability, which allows the camera to transmit data and receive power through a single RJ45 cable. The camera also supports 3G/4G (WiMAX/LTE) wireless connectivity for use in areas where cable installation would be costly or difficult. It features live video feed and 2-way audio that can be accessed over the network via any Internet browser on a PC or a 3G-enabled mobile device.

Full HD 1080p video streaming at 30 fps
Intelligent multi-profile sensor management for adaptability in different ambient conditions
1/2.5" sensor for low lux applications
Day and night functionality with removable IR-cut filter
30 IR LEDs
Built-in 802.3af compliant PoE (Power over Ethernet)
Supports 3G/ 4G (WiMAX/LTE) wireless connectivity
One DI/DO port for connection with an external alarm and sensor device
microSD slot for edge recording
Note:
Memory card not included
Supports 2-way audio with integrated microphone and speaker
Privacy button
Includes CD with 64-channel recording software
ONVIF compliant

Brickcom MB-200Ap Specs

Camera
Hardware
CPU: 533 MHz
Flash: 32 MB
RAM: 256 MB DDR
Image Sensor
Sensor Type: 1/2.5" CMOS sensor
Resolution: 1920 x 1080 pixel
Minimum Illumination
2 lux (F1.6, color)
0 lux (IR on)
Lens Type
Board Lens
Focal Length
f4 mm
Iris
F1.6
IR Illuminator
30 x IR LEDs, effective up to 49.2' (15.0 m)
View Angle
Normal Mode: 62° (H), 34° (V), & 71° (D)
Ultra Wide Mode: 86° (H), 46° (V), & 80° (D)
Audio
Streaming
2-way audio support
Audio Compression Format
G.711, AMR (8 kHz, Mono, PCM)
Audio Input / Output
Built-in mic & speaker
Video
Image Compression
H.264 / MPEG4 / MJPEG
Video Setting
Audio Exposure Control: Sport/ normal/ night vision/ user defined
Manual Exposure Control: 1/20000 to 1/5 sec
Manual Gain Control: 1 to 32x
Manual White Balance Control: 2000 to 7000 K
S/N Ratio
38.1 dB
Image Resolution
2M (Full HD): 1920 x 1080 @ 30 fps
1M (HDTV): 1280 x 720 @ 30 fps
General
Management
Events: Motion detection, schedule, audio detection, & digital input
Alarm: Stream/snapshot to FTP, Samba, SD card recording, HTTP, email notification, & digital output
Communication
Ethernet: 1 x 10/100 Mb/s RJ-45
1 x USB port for 3G/ 4G (WiMAX/LTE)
1 x DIDO I/O Port
Supported Protocols
TCP/IP, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, Samba, PPPoE, UPnP, RTP, RTSP, RTCP, IPv6
Interfaces
Built-in microphone & speaker, Ethernet RJ45 socket, power connector, DIDO terminal I/O connector, reset button, privacy button, microSD/SDHC slot, & USB port for 3G/4G
Day & Night
Mechanical ICR, triggered by sensor
Minimum Computer Requirements
Operating System: Microsoft Windows XP Home/Professional Edition SP2
Computer: IBM PC/AT Compatible
CPU: Pentium 3 GHz or faster
Memory:1024 MB or more
Monitor: 1024 x 768 pixels or more, 24-bit True Color or better
Network Interface: 10/100 Mb/s network interface card must be installed
Web Browser: Microsoft Internet Explorer 6.0 SP2 or higher
Adobe Reader: Adobe Reader 8.0 or higher
Audio: The audio function will not work if a sound card is not installed in the PC. Audio may be interrupted depending on network traffic.
Power Input
PoE 802.3af, 12 VDC / 1 A (power supply not included)
Power Consumption
6.4 W
Certification
FCC, CE
Operating Temperature
32 to 122°F (0 to 50°C)
Operating Humidity
10 to 80%
Dimensions
6.4 x 6.4 x 4.9" (16.3 x 16.3 x 12.5 cm)
Weight
16.6 oz (470.0 g)
Packaging Info
Package Weight
1.2 lb
Box Dimensions (LxWxH)
16 x 16 x 13"

Brickcom MB-200Ap Reviews

See any errors on this page?
Whatever You Need, We've Got It