Brickcom VD-202Np 2MP Full HD Outdoor Vandal Dome Network Camera with 3.3 to 10.5mm Lens & Built-in Heater

BH #BRVD202NP • MFR #VD-202NP
Print
Brickcom VD-202Np 2MP Full HD Outdoor Vandal Dome Network Camera with 3.3 to 10.5mm Lens & Built-in Heater
No Longer Available
No Store Display
Ask an Expert
800-606-6969

Brickcom VD-202Np Overview

The VD-202Np 2MP Full HD Outdoor Vandal Dome Network Camera with 3.3 to 10.5mm Lens & Built-in Heater from Brickcom features a high-performance 1/2.8” Sony Exmor sensor and CPU that make it capable of recording in 1920 x 1080 at 30 fps. The camera features a 3.3 to 10.5mm varifocal lens, which offers wide coverage. It can transmit video using MPEG-4, MJPEG, and H.264 compression options, which reduce bandwidth and storage requirements without compromising image quality.

By utilizing a built-in industrial fan and heater, the camera can perform well in extreme temperatures. The IP67-rated enclosure ensures dust and water resistance, making the camera weatherproof and suitable for outdoor surveillance. The enclosure is also IK10 rated for protection against acts of vandalism. The DI/DO function allows users to connect external alarms and sensors for added security.

Support for Power over Ethernet enables the camera to receive power through the data/network cable itself, thus simplifying installation by eliminating the need for a separate power supply and associated wiring. The included EasyConfig installation software and 3-axis adjustment further simplify installation. The camera is suitable for use in schools, banks, or corporate office surveillance systems.

2MP outdoor vandal dome camera
N-Series 1/2.8" Sony Exmor CMOS sensor
Full HD 1080p resolution @ 30 fps streaming
WDR Enhancement technology
MPEG-4, MJPEG, and H.264 triple codec compression
Intelligent Multi-Profile Sensor Management for adaptation to different environments
Removable IR-cut filter and auto light sensor for day and night operation
Built-in 12 IR LEDs, effective up to 49.2'
Smart IR to adjust the IR LED light across the entire area to get a well illuminated image
One DI/DO for external alarm and sensor device
3 axis design for simple installation
Two-way audio support
Note:
Mic and speakers not included.
Built-in SD/SDHC memory card slot for local storage up to 64 GB
Note:
Memory card not included.
IK10 vandal-proof and IP67 weatherproof outdoor enclosure
Supports 802.3 af PoE, 802.3 at PoE Plus, and 12VDC operation
Real-time clock
ONVIF conformant

Brickcom VD-202Np Specs

Camera
Hardware
CPU: 533 MHz
Flash: 32 MB
RAM: 256 MB DDR
Image Sensor
Sensor Type: 1/2.8" Sony Exmor CMOS sensor
Resolution: 1920 x 1080 pixel
Minimum Illumination
0 lux (IR On, B&W)
0.02 lux (IR Off, B&W)
0.01 lux (F1.4, color)
IR Illuminator
Built-in IR illuminators, effective up to 49.2' (15.0 m)
IR LED
12
IR Wavelength
850 nm
Lens Type
2 MP board type varifocal lens
Focal Length
f = 3.3 to 10.5 mm / F1.4
View Angle
28 to 72° (H), 16 to 40° (V), & 32 to 83° (D)
D&N Selection
Triggered by light sensor, scheduling, & digital input
Local Storage
Built-in SD/SDHC/SDXC memory card slot (maximum 64 GB)
Audio
Streaming
2-way audio support
Audio Compression Format
G.711, AMR (8 kHz, mono, PCM)
Audio Input / Output
Line In / Out
Video
Image Compression
H.264 / MPEG4 / MJPEG (simultaneous multiple streams)
Video Setting
Multi-Profile Image Management: Day, night, sunset, user 1, user 2, auto exposure control
Manual Exposure Control: 1/10000 to 1/5 sec
Manual Gain Control: 1 to 32x
Manual White Balance Control: 2000 to 7000 K
S/N Ratio
> 50 dB
Image Resolution
2 M (Full HD): 1920 x 1080 @ 30 fps
1 M (HDTV): 1280 x 1024 @ 25 fps
Alarm and Event
Event
Motion detection / schedule / audio detection / digital input
Alarm
Stream / snapshot to ftp / Samba / HTTP / SD card recording / email notification / digital output
General
Communication
Ethernet: 1 x 10/100 Mb/s RJ-45
Supported Protocols
TCP/IP, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, Samba, PPPoE, UPnP, RTP, RTSP, RTCP, IPv6
Power Input
12 VDC / 1 A (power supply not included)
802.3 af POE and 802.3 at POE Plus
Power Consumption
802.3 af PoE: 10 W
802.3 at PoE Plus: 23 W
12 VDC / 1 A: 8 W
Certification
FCC, CE, IK10
Housing
Weather-proof (IP67), Vandal-proof (IK10)
Viewing System Requirements
OS: Microsoft Windows 8/7/Vista/XP/2000
Browser: Mozilla Firefox, Internet Explorer 7/8 or above, Safari, Google Chrome
Cell Phone: 3GPP player
Real Player: 10.5 or above
Quick Time: 6.6 or above
VLC
Operating Temperature
802.3 af POE / 12 VDC 1 A: -4 to 140°F (-20 to 60°C)
802.3at PoE Plus: -40 to 140°F (-40 to 60°C) with build in fan and heater
Operating Humidity
10 to 80%
Dimensions
4.5 x 5.6" (11.4 x 14.4 cm)
Weight
1.9 lb (0.9 kg)
Packaging Info
Package Weight
1.2 lb
Box Dimensions (LxWxH)
16 x 16 x 13"

Brickcom VD-202Np Reviews

See any errors on this page?
Whatever You Need, We've Got It