Fat Shark PredatorV2 FPV Headset with Video Downlink Bundle

BH #FAFHSPREV205 • MFR #1025
Print
Fat Shark PredatorV2 FPV Headset with Video Downlink Bundle
Key Features
  • View Video Downlink from Transmitter
  • Dual VGA (640x480) Displays
  • NexwaveRF 5.8GHz Receiver
  • Circular Polarized Antenna
The PredatorV2 FPV Headset with Video Downlink Bundle from Fat Shark combines a pair of FPV goggles with dual VGA resolution displays and a video downlink system consisting of an ImmersionRC 25mW 5.8GHz transmitter, 600TVL resolution CMOS camera, and filtered power adapter. The downlink system comes pre-assembled so it is ready to install in your RC aircraft.
More Details
No Longer Available
No Store Display
Ask an Expert
866-842-7675

Fat Shark 1025 Overview

The PredatorV2 FPV Headset with Video Downlink Bundle from Fat Shark combines a pair of FPV goggles with dual VGA resolution displays and a video downlink system consisting of an ImmersionRC 25mW 5.8GHz transmitter, 600TVL resolution CMOS camera, and filtered power adapter. The downlink system comes pre-assembled so it is ready to install in your RC aircraft.

The PredatorV2 pairs a high performance NexwaveRF 5.8GHz receiver with a SpiroNET circular polarized antenna for a video link up to 1640' (500m). The headset is powered by an included 1000mA lithium polymer battery pack. Ports on the headset in AV in/out, headphone jack, power in, and a PS/2 port for being powered from a Futaba radio or ezUHF transmitter. Also included with the headset is an AV cable and carry case.

The Downlink system comes pre-assembled and tested for plug/play with your RC aircraft. Simply connect the balance lead of your 2S to 4S (7 to 25 VDC) RC battery to provide power and you are ready to fly. The balance lead filters RC servo and motor noise from your RC pack for a crisp, clear image.

Headset Controls
  • Brightness/contrast
  • RX power switch
  • Channel select
  • Volume control
  • Low battery warning
Additional Features
  • Ergonomic molded headset w/ adjustable headband
  • Secured rubber eye cups for ambient light reduction
  • Optional -2, -4, and -6 diopter set available for near-sighted correction

Fat Shark 1025 Specs

Headset
Optics
25° diagonal FOV
2.5" (63.5 mm) interpupillary distance (IPD)
Display
Two full color micro VGA LCDs (640 x 480)
922,000 pixels per display
Interface
1 x 3.5 mm AV in/out
1 x Power in
1 x 3.5 mm headphone jack
1 x PS/2 DIN additional power port (alternative headset supply from Futaba or ezUHF)
User Controls
Channel selection
Volume control
Mode selection (wire/wireless)
Contrast/brightness control
Antenna
External circular polarized
~2.15 dBi
System
NTSC/PAL auto select
Interlaced only (no progressive scan)
Receiver
5.8 GHz, 7-channel
Operates at: 5740 MHz, 5760 MHz, 5780 MHz, 5800 MHz, 5820 MHz, 5840 MHz, 5860 MHz
Battery
7 to 13 VDC (2S / 3S supply)
Balance lead and discharge adapter for charging via RC chargers
Power Consumption
300 mA (wireless mode, at 7.4V nominal)
160 mA direct mode (no RX, at 7.4V nominal)
Weight
5.3 oz (150 g)
Transmitter
Antenna
Fixed circular polarized
2.15 dBi
Transmitting Power
25 mW
Frequency
5.8 GHz
Operates at: 5740 MHz, 5760 MHz, 5780 MHz, 5800 MHz, 5820 MHz, 5840 MHz, 5860 MHz
Power Supply
7 to 25 VDC
Power Consumption
150 mA at 7.4 VDC
Dimensions
2.0 x 0.9 x 0.5" (5.0 x 2.3 x 1.2 cm)
Weight
With antenna: 0.9 oz (25 g)
Camera
Imaging Sensor
1/3" CMOS
600 TVL
System
NTSC or PAL (selectable; jumper on = NTSC)
Focal Length
2.8 mm
Field of View
100° diagonal
Lens Coating
IR coated
Dimensions
Body: 0.83 x 0.83 x 0.47" (21 x 21 x 12 mm) Lens extrude (Depth x Diam.): 0.59 x 0.55" (15 x 14 mm)
Weight
0.5 oz (15 g)
Onboard FPV Components
Power Supply
7 to 25 VDC, via battery balance lead
Power Consumption
225 mA at 7.4 VDC
Total Weight
TX, camera, filtered power adapter, antenna, and wires: 1.66 oz (47 g)
Packaging Info
Package Weight
1.3 lb
Box Dimensions (LxWxH)
8.8 x 6.7 x 2.9"

Fat Shark 1025 Reviews

See any errors on this page?
Whatever You Need, We've Got It