Aiphone PASO DMA2060 Paging Amplifier

BH #AIDMA2060 • MFR #DMA2060
Print
Aiphone PASO DMA2060 Paging Amplifier
No Longer Available
No Store Display
Ask an Expert
866-264-7509

Aiphone DMA2060 Overview

The Aiphone PASO DMA2060 Paging Amplifier is a 60 Watt, four zone amplifier with four channel inputs and two zone outputs.

Wide frequency response - very low distortion
4 channel inputs, 2 zone outputs
Up to 3 balanced microphone inputs
Phantom power on all mic inputs
Mic 2/Aux 1 and mic 3/Aux 2 inputs with stereo summing
Aux1 and Aux2 inputs attenuator
600 ohm transformer balanced - telephone paging input
Mix buss and 600 ohm line output
Independent input controls
Aux1 remote volume controls
External EQ Link
Tone by-pass and EQ Link switches
Addressable VOX buss - voice activated muting
VOX variable time delay function
Addressable mute buss
Direct muting and unmuting
600 ohm and 8 ohm 2 Watt max music on hold amplifier
MOH amplifier source selector
Zone 2, 2 Watt - 8 ohm output with separate control
24 VDC 250 mA regulated power supply output
8 ohm, 25 Volt & 70 Volt output
Optional 19" rack mounting with kit - 2-unit of vertical rack space
UL 6500 listed

Aiphone DMA2060 Specs

Speaker Power
60 W RMS
Distortion
0.01% THD at 1 kHz rated power
Frequency Response
20 Hz - 30 kHz ± 2 dB
Inputs
Input 1: mic electronically balanced, transformer balanced with optional equipment
Input 2: telephone transformer balanced
Input 3: mic electronically balanced - AUX 1 (stereo sum.)
Input 4: mic electronically balanced - AUX 2 (stereo sum.)
Sensitivity
Input 1, Mic 1: 1.5 Mv, 250 Ohm
Input 2, Tel: 100 Mv, 600 Ohm, transformer balanced
Input 3, Mic 3: 1.5 Mv, 250 Ohm; AUX 1: 100 Mv, 47 kOhm
Input 4, Mic 4: 1.5 Mv, 250 Ohm; AUX 2: 100 Mv, 47 kOhm
Input Attenuator
AUX 1 and AUX 2
Phantom Power
All microphone inputs by internal jumper (18 V)
Hum & Noise
Mic -70 dB, Aux -75 dB 600 Ohm transformer balanced
Paging
EQ Link: preamp out, power amp in with EQ Link switch
Line outputs: line out 600 Ohm, 1.5 V loaded
Inputs/outputs: MIX BUSS
Music on hold output: 600 Ohm, 1 V transformer balanced
Zone 2 output: 2 W max, 8 Ohm with control
Main output impedance: 8 Ohm, 25 V and 70 V line
Front Panel Controls
Input 1 volume, input 2 volume, input 3 volume, input 4 volume, bass, treble
Rear Panel Controls
AUX 1 attenuator, AUX 2 attenuator, VOX sensitivity, MOH/Zone 1 level control, Zone 2 level control, VOX sensitivity, mute delay (adjustable from 3 - 60 sec), tone bypass on/off switch
Tone Controls
Bass and treble ± 10 dB at 100 Hz and 10 kHz
Volume Control
Remote volume control: Input 3 - AUX 1 input volume
Source Selection
MOH source select: AUX 1 and AUX 2
Zone 2 source select: AUX 1 and AUX 2
Busses
VOX BUSS, Mute BUSS: available on all inputs by internal jumper
Muting
Direct muting: external contact closure
Unmuting: mutes/unmutes mic 1 only
Power Output
24 VDC, 250 mA regulated
Rack Mountable
Optional 19" rack mount kit
Cooling
Thermally controlled
Protection
Power surge, overload, thermal
Power Requirement
117 VAC, 50-60 Hz
Power Consumption
670 VA
Built-in AC Outlets
117 V, 500 W max unswitched
Termination
Screw terminals, RCA jacks
Power Indicators
Output power indicator: multi-color LED signal and clip
Dimensions
10.8 x 11.0 x 4.0" (27.4 x 28.0 x 10.2 cm) with feet
10.8 x 11.0 x 3.5" (27.4 x 28.0 x 8.9 cm) without feet
Weight
12.5 lbs (5.7 kg)
Packaging Info
Package Weight
14.2 lb
Box Dimensions (LxWxH)
15.3 x 14 x 6.9"

Aiphone DMA2060 Reviews

See any errors on this page?
Whatever You Need, We've Got It