The Nexto DI NVS2501 Field Video Storage provides a 512GB high-capacity portable solution for offloading, and previewing of data when on location or in the field. It features slots for available ExpressCard, SD/SDHC/SDXC, and CF/MD media that allow you to transfer data directly from your media card to the Nexto DI. An included Express Card to PCMCIA adapter and available XQD adapters allow you to transfer from P2/P2E and compatible XQD media cards respectively. The NVS2501 features three different copy modes, Fast Copy, Copy & Verify, and Safe Copy that allow you to choose the amount of data verification used when copying your files.
Using the unit's built-in LCD monitor, you can preview video from either the internal drive or from an attached media card or external USB drive. The Nexto DI NVS2501 will act as an external drive when connected to your computer via its mini B USB 2.0 port, Firewire 800 port, or combo eSATA/USB 3.0 port. Note that you cannot use the Combo eSATA/USB 3.0 port to connect to a computer. However, you can copy directly from the unit's internal drive to an attached USB external drive using the combo eSATA/USB 3.0 port, and you can copy from your media card to both the Nexto DI NVS2501 and an attached external USB drive at the same time, via the combo eSATA/USB 3.0 port.
Built-in bad sector recovery allows you to use footage that might have otherwise been lost due to bad disk sectors. With its free-fall sensor, protection protocols, and the included rubber bumpers that provide additional shock protection, the Nexto DI is built to store and protect your data. It can be powered by a rechargeable internal battery, 4 x AA batteries (using the included battery holder), a car with a lighter outlet, and USB or Firewire bus power.
eSATA: 80 MB/s, 6 minutes, 66 seconds to transfer 32GB.
IEEE1394b (FireWire 800): 75 MB/s, 7 minutes, 10 seconds to transfer 32GB.
USB 2.0: 33 MB/s, 16 minutes, 17 seconds to transfer 32GB.
Note: you cannot connect the Nexto DI to a computer via USB using the combo eSATA/USB 3.0 port, as the USB component acts as a USB Host. You can only connect the Nexto DI to a computer using USB 2.0 via the mini B USB connector.
