Video Chat with a Pro Audio Expert - Live

OWI Inc. AMP-IW4S In-Wall Four-Source Digital Mixer and Amplifier

BH #OWAIW4S • MFR #AMP-IW4S
Print
OWI Inc. AMP-IW4S In-Wall Four-Source Digital Mixer and Amplifier
Key Features
  • Integrated Four Source Mixer
  • Two Integrated 15W Class-D Amplifiers
  • Installation into 1-Gang Electrical Box
  • Front Panel Soft Push Volume Controls
The AMP-IW4S from OWI is an in-wall four-source digital mixer and 15W amplifier suitable for AV and standalone audio-only communication systems. The unit is ideal for most small room applications including education, healthcare, corporate, retail, church, government, entertainment, and sporting facilities. The easy-to-install system fits into a standard 1-gang electrical box and provides full fidelity output capable of driving 1 to 4 speakers.
More Details
No Longer Available
No Store Display
Ask an Expert
800-606-6969

OWI Inc. AMP-IW4S Overview

The AMP-IW4S from OWI is an in-wall four-source digital mixer and 15W amplifier suitable for AV and standalone audio-only communication systems. The unit is ideal for most small room applications including education, healthcare, corporate, retail, church, government, entertainment, and sporting facilities. The easy-to-install system fits into a standard 1-gang electrical box and provides full fidelity output capable of driving 1 to 4 speakers.

The AMP-IW4S is compatible with all 4 to 8 Ohm speakers and may be used in larger 25V to 70V distributed audio systems serving as a stand-alone interface for the end user control of the multimedia equipment it supports.

  • Robust digital Class-D amplifier operating at 90%+ efficiency
  • Stereo sum to mono operation with dual 15 W, 4 or 8 Ohm output
  • Full audio bandwidth operating at 20 Hz to 20 kHz
  • 1-gang “Form” factor for simple installation in 1-gang electrical box
  • Compatible with Decora style “80401” wall plate
  • 3 x audio inputs with 1 x master override with automatic ducking
  • Front panel soft push buttons control for audio volume (+/-)
  • Front panel visual LEDs (Green) for instant status of volume
  • Automatic over-current, over-temperature and power reverse polarity protection
  • Audio line output 1V nominal to drive higher power amplifier or remote recording device
  • 24VDC / 2.5A external regulated in-line switching power supply UL/CUL/CE/Energy-Star rated
  • IR remote control included

OWI Inc. AMP-IW4S Specs

Architecture
Type Architecture: 2 channel mixer amplifier digital class D
Input Connections
External Front Audio Input: 3 x 3.5 mm
Internal Audio-In Connector: 3-Pin
Internal Override Connector: 2-Pin
Frequency Response
20 Hz to 20 kHz (±1.5 dB)
THD+N
THD + N (Mono-Each Channel):
≤1.0% at 1 kHz rated output
≤0.1% at 1 kHz at 10 W, 4 Ohms
Signal to Noise Ratio
90 dB A-weighted (band pass 20 Hz to 20 kHz)
Channel Separation
60 dB
Dynamic Range
100 dB
Input Sensitivity and Impedance
Program: 0.775 V, 10 kOhms electronically balanced, with RF filter (ferrite)
Speaker Output
4 Ohms (optimum) or 8 Ohms
Output Regulation
Less than 2 dB, no load to full load at 1 kHz
Automatic "Duck" manual adjust
1 to -50 dB for Mic input
Internal Controls
"Duck" Level: Screwdriver adjust
Front Controls
Volume Gain (+/-): Soft push buttons
Power Efficiency
<80% at 25 W @ 4 Ohms, <85% @ 8 Ohms
<90% at 10 W @ 4 Ohms, <95% @ 8 Ohms
Operating/Storage Temperature
Operating: -14 to 104°F / -26 to 40°C
Storage: -4 to 149°F / -20 to 65°C
Compliance
FCC, UL, CUL, CE
Power
Main Input Power: 100-240 VAC, 50 - 60 Hz
Input Power (to HNB): 24 VDC in-line regulated power supply, 2.5 A
Output Power: 15 W peak per channel at 4 Ohms
Dimensions
Decora Plate: 2.8 x 4.5" / 7.0 x 11.4 cm
Internal Circuit Board: 1.5 x 4.1 x 3.0" / 3.8 x 10.5 x 7.5 cm
Wireless Remote: 1.3 x 3.4" / 3.3 x 8.6 cm
Weight
Not Specified by Manufacturer
Packaging Info
Box Dimensions (LxWxH)
12 x 8 x 4"

OWI Inc. AMP-IW4S Reviews

See any errors on this page?
Whatever You Need, We've Got It