Speco Technologies IP-INTB1 Network Bullet Camera with DC Auto Iris 2.8 to 10mm Lens (NTSC)

BH #SPIPINTB1 • MFR #IP-INTB1
Print
Speco Technologies IP-INTB1 Network Bullet Camera with DC Auto Iris 2.8 to 10mm Lens (NTSC)
No Longer Available
No Store Display
Ask an Expert
866-264-7509

Speco Technologies IP-INTB1 Overview

The 1/3" Sony Super HAD CCD sensor of the IP-INTB1 Network Bullet Camera with DC Auto Iris 2.8 to 10mm Lens (NTSC) from Speco Technologies captures high-quality images up to 540TVL. This camera captures clear images in illumination levels as low as 0.002 lux.

The camera supports MPEG4 and JPEG codecs for transmission. This network camera has a built-in streaming server that allows you to monitor and record real-time images in remote locations, over the Internet. It supports both static and dynamic IP addressing.

2.8 to 10mm varifocal lens
Supports recording up to 540TVL
Supports MPEG4 and JPEG codecs
Built-in OSD control
Four zone programmable privacy function
Supports manual, scheduled, motion detection, and sensor event recording modes
Alarm notification via sms, email, and alarm sound (option)

Speco Technologies IP-INTB1 Specs

Camera
Image Sensor
1/3" Sony Super HAD CCD, 410,000 pixels
Lens
2.8 to 10 mm varifocal lens (F1.2)
Total Pixels
811 (H) x 508 (V)
Effective Pixels
768 (H) x 494 (V)
Horizontal Resolution
540 TVL
Minimum Illumination
0.002 lux (selectable limit up to x128)
S/N Ratio
50 dB (weight on)
Scanning System
2:1 interlaced
Synchronization
Internal
Compression
MPEG4 / JPEG
Multi-Streaming
MPEG4 (2 channels), JPEG (1 channel)
Bitrate Control
VBR, CBR
Gain Control
On / Off
Electronic Shutter Speed
1/60 to 1/200,000 sec
Intensifier
Built-in (selectable limit up to x128)
White Balance
ATW / AWC / Manual
Streaming Capability
Up to 5 simultaneous profiles
Noise Reduction
Low / Middle / High / Off
Frame Rate
30, 15, 10, 7, 6, 5, 4, 3, 2, 1 fps (10 steps)
121 fps maximum at 352 x 240
Image Size
704 x 480, 704 x 240, 352 x 480, and 352 x 240
Control
Viewer
Web viewer @ PC
Program
PDA viewer @ PC, viewer @ mobile phone, and NVR @ PC
Network
Global/Private/Static/Dynamic IP
DDNS support
Encryption (ID/PW/Image)
10/100 Mb/s interface
User Account
20 concurrent users
Alarm and Event Management
Sensor trigger / motion detection
Alarm Notification: sms / email / alarm sound (option)
Connectivity
Video Out
1.0 Vpp 75 Ω composite
Ethernet
RJ45 (10Base-T/100Base-TX)
Protocols
HTTP, FTP, SMTP, TCP, IP, DHCP, ICMP, NTP, DNS, DDNS
PC Requirements
Browser
Internet Explorer 6 and above
Operating System
Windows 2000 / XP
Processor
Intel Pentium III 1 GHz (P4 2.4 GHz recommended)
Memory
256 MB (512 MB recommended)
General
Power Supply
12 VDC (power supply not included)
Power Consumption
6 W maximum
Operating Temperature
14 to 122°F (-10 to 50°C) RH 95% maximum
Operating Humidity
95% RH maximum
Dimensions
2.7 x 2.9 x 11.8" (6.9 x 7.3 x 30.0 cm)
Weight
3.1 lb (1.4 kg)

Speco Technologies IP-INTB1 Reviews

See any errors on this page?
Whatever You Need, We've Got It