VideoComm Technologies EV-L2R2403C6 Wireless Elevator Video System

BH #VIEVL2R243C6 • MFR #EV-L2R2403C6
Print
VideoComm Technologies EV-L2R2403C6 Wireless Elevator Video System
No Longer Available
No Store Display
Ask an Expert
800-606-6969

VideoComm Technologies EV-L2R2403C6 Overview

The EV-L2R2403C6 Wireless Elevator Video System fromVideoComm Technologies includes a mini vandal-proof IR dome camera and an all-weather digital transmitter and receiver. The included camera features a 2.8mm fisheye fixed lens for super wide angle viewing whereas the included transmitter and receiver ensure real-time DVD quality encrypted digital video up to 200 floors. The system's plug-and-play design ensures easy and quick installation. Additionally, the camera can be flush or angle surface mounted as per the user's requirement. This system is suitable for identifying, monitoring and recording employees and residents while deterring vandalism and unwanted visitors.

  • Pre-configured plug & play design
  • Transmits real-time DVD quality video for up to 200 Floors
  • Digital immunity to signal interference
  • Fast hardware based MPEG-4 encoder & decoder
  • 5-tier input power management system
  • 64-bit encrypted data stream (optional 128-bit)
  • Automatic system pairing and on screen status display
  • No connections to the elevator mechanics or traveling cable
  • No maintenance or service inspections required
  • Deters vandalism, trespassing, and other criminal behavior
  • Easily identify employees, residents, and visitors
  • FCC & IC approved for license free use
  • Complies with TSSA, ASME & FCC safety standards

VideoComm Technologies EV-L2R2403C6 Specs

Camera
Resolution
600 Lines
Video Format
NTSC (30 fps)
Camera Type
1/3" Sony day/night mini IR dome
Lens Type
2.8 mm fisheye fixed pinhole cone lens
S/N Ratio
>48 dB (AGC Off)
AGC (Automatic Gain Control)
Automatic
Video Connector
BNC female
Impedance
75 Ohms @ 1 Vpp
Power Supply
12 VDC @ 1.2 A
Power Connector
2.1 mm barrel jack
Current Consumption
<130 mA @ 12 VDC
Construction
IP-66 rated; aluminum design
Operating Temperature
-22 to 150°F (-30 to 66°C)
Dimensions
3.4 x 2.8" (8.6 x 7.1 cm)
Weight
0.7 lb (0.3 kg)
Transmitter/Receiver
Operating Frequency
Dual diversity 2.40 to 2.48 GHz @ 10 MHz bandwidth
Modulation
OFDM (BPSK, QPSK, 16QAM, 64QAM)
Protocol
802.11a
Frequency Control
Automatic channel selection
Security Authentication System
Private SSID 64-bit encrypted data system (WEP); optional 128-bit
Data Rate
6 to 54 Mbps
Latency
0.5 to 5 sec (signal dependent)
Video Compression Format
Hardware based MPEG-4
Video Resolution
NTSC: 720 x 480
PAL: 720 x 576
Frame Rate
NTSC: 30 fps
PAL: 25 fps
Radiated Power
450 mW
Range & Elevation (Line of Sight)
Up to 200 floors
Receiver Sensitivity
54 Mbps @ -72 dBm to 6 Mbps @ -90 dBm
Antenna Type
3dB omni-directional rubber duck antennas
H-plane: 360°; V-plane: 50°
Input Connector
SMA female
Video Connector
BNC male @ 75 Ohms 1 Vpp
Audio Connector
BNC male @ 600 Ohms 1 Vpp
Power Supply
12 VDC @ 2 A
Operating Voltage
12 to 30 VAC or VDC
Current Consumption
1 A
Surge Protection
ESD surge / lightning protected up to 1,500 W
Construction
IP-67 rated all-weather design
Operating Temperature Range
-40 to 170°F (-40 to 77°C)
Approvals and Compliance
TSSA/ASME; FCC/IC
Dimensions
7 x 7 x 4" (178 x 178 x 102 mm) each enclosure
Weight
28 oz (839 g)

VideoComm Technologies EV-L2R2403C6 Reviews

See any errors on this page?
Whatever You Need, We've Got It