Holiday Kickoff

Video Chat with a Pro Audio Expert - Live

Rane Commercial HAL3s Rackmount Audio Multiprocessor

BH #RAHAL3S • MFR #HAL3S
Print
Rane Commercial HAL3s Rackmount Audio Multiprocessor
Key Features
  • For Room Combining, Paging, Distributing
  • 2 Mic/Line Inputs with Phantom Power
  • 6 Balanced Analog Line Outputs
  • 4x4 Expansion via RAD Ports
The Rane Commercial HAL3s is a 1 RU rackmount audio multiprocessor that supports up to 6x10 audio—two inputs and six outputs via balanced analog connections and another four inputs and four outputs through optional RADs (remote audio devices)—and user-friendly room combining, paging, and distributing across multiple zones through powerful browser-based software.
More Details
No Longer Available
No Store Display
Ask an Expert
800-606-6969

Rane Commercial HAL3S Overview

The Rane Commercial HAL3s is a 1 RU rackmount audio multiprocessor that supports up to 6x10 audio—two inputs and six outputs via balanced analog connections and another four inputs and four outputs through optional RADs (remote audio devices)—and user-friendly room combining, paging, and distributing across multiple zones through powerful browser-based software.

The two analog inputs can accommodate mic, line, or line-plus signals and provide 48V phantom power for condenser microphones. The six analog outputs send balanced line-level signal at up to +20 dBu. All analog I/O hookups utilize Euroblock 6-pin connectors. The front panel of the HAL3s is laden with LED indicators for signal presence and overload, as well as power and fault status.

Versatile external control is made possible by the four logic inputs and support for up to two RADs and two digital remotes (or four digital remotes). An event manager is provided for time-of-day event control.

DSP contains 2400 MIPS of processing power
Ethernet 1000Base-T with Zeroconf service discovery protocol for easy setup
Two analog inputs on Euroblock connectors for mic or line-plus inputs
Six balanced analog line-level outputs on Euroblock connectors
Front-panel signal and overload indicators for all inputs and outputs
Two RAD ports with 2x2 I/O plus control channel
Four digital remote ports (DR can connect to RAD port)
Four logic inputs on mini-Euroblock 6-pin connectors
High dynamic range of 108 dB

Rane Commercial HAL3S Specs

Inputs
1 x Euroblock 6-Pin with 5 mm Pitch (2 x Mic / Line / Line-Plus Inputs)
Outputs
3 x Euroblock 6-Pin with 5 mm Pitch (6 x Line Outputs)
Ethernet Ports
1 x RJ45
Codec
24-Bit, 48 kHz
Input Impedance
2.9 Kilohms, 1% per Leg to Ground
Output Impedance
200 Ohms, 1% Each Leg
Isolation Between Channels
>100 dB Typical (20 to 20 kHz, Unity Gain, Channel-to-Channel)
CMRR
55 dB, Minimum 1 kHz
Gain
Dynamic Microphone Mode: +30 to +50 dB
Condenser Microphone Mode: +18 to +38 dB
Line-Plus Mode: 0 to +20 dB
Line Mode: 0 dB
Maximum Input Level
Dynamic Microphone Mode: -18 dBV (125 mVrms) Typical, 1 kHz, <0.01% THD+N
Condenser Microphone Mode: -6 dBV (500 mVrms) Typical, 1 kHz, <0.01% THD+N
Line-Plus Mode: +14 dBu Typical, 1 kHz, <0.01% THD+N, Each Leg
Line Mode: +14 dBu Typical, 1 kHz, <0.01% THD+N
Maximum Output Level
+20.0 dBu Typical, 1 kHz, 100-Kilohm Load
+15.5 dBu Typical, 1 kHz, 600-Kilohm Load
THD + N
Dynamic Microphone Mode: <0.005% Typical (20 to 20 kHz, +4 dBu Out, 0 dB Digital Gain)
Condenser Microphone Mode: <0.005% Typical (20 to 20 kHz, +4 dBu Out, 0 dB Digital Gain)
Line-Plus Mode: <0.007% Typical (20 to 20 kHz, +4 dBu Out, 0 dB Digital Gain)
Line Mode: <0.005% Typical (20 to 20 kHz, +4 dBu Out, 0 dB Digital Gain)
Equivalent Input Noise
Dynamic Microphone Mode: -120 dBu Typical (20 to 20 kHz, 150-Ohm Source, 30 dB Gain)
Condenser Microphone Mode: -118 dBu Typical (20 to 20 kHz, 150-Ohm Source, 18 dB Gain)
Frequency Response
Dynamic/Condenser Microphone Mode: 20 to 20 kHz, +0.0 / -0.3 dB, +4 dBu Out, 100-Kilohm Load, Microphone Input to Output
Line / Line-Plus Mode: 20 to 20 kHz, +0.0 / -0.3 dB, +4 dBu Out, 100-Kilohm Load, Line-Plus Input to Output
Dynamic Range
Line / Line-Plus Mode: 108 dB Maximum, re +20 dBu, 20 kHz Bandwidth, A-Weighted, Resistance = 50 Ohms
Phantom Power
+48 VDC, 10 mA Max per Input
Indicators
Signal: -50 dBFS, Green LED, Peak-Reading
Overload: -0.5 dBFS, Red LED, Peak-Reading
Propagation Delay
RAD In to RAD Out: 1.71 ms
RAD In to Analog Out: 1.85 ms
Analog In to RAD Out: 2.25 ms
Analog In to Analog Out: 2.39 ms
DSP
Processing Power: 2400 MIPS, Maximum 1 DSP at 300 MHz with up to 8 Instructions / Cycle
Word Length: 32-/64-Bit Floating Point
Delay Memory: 20 Seconds Maximum
Computer Interface
Type: Ethernet 1000 Base-T
Cable: Shielded Cat5e or Better
Length: 300' / 91.4 m Maximum
Ports
RAD Port:
Audio Channels: 2 In x 2 Out, Control Channel, 24-Bit, 48 kHz
Power: 24 VDC at 100 mA per Port
Length: 500' / 152.4 m
DR Ports:
Power: 24 VDC at 50 mA per Port
Length: 1000' / 304.8 m
Logic Input
Connector: Mini Euroblock, 6-Pin, 3.81 mm Pitch, Black
Internal Pull-Up: 51.1 Kilohms, 5 V, Protected to +24 V, Reverse Polarity Protected
Vin High: >2.2 V
Vin Low: <0.7 V
Wiring
Class 2
Power Requirements
100 to 240 VAC, 50/60 Hz, 20 W Max
Ambient Temperature
104°F / 40°C
Approvals and Compliance
CE, FCC, CCSAUS
Dimensions
19 x 1.7 x 8.3" / 48.3 x 4.4 x 21 cm
Weight
4.8 lb / 2.2 kg
Packaging Info
Package Weight
8.08 lb
Box Dimensions (LxWxH)
22.1 x 12.7 x 4.6"

Rane Commercial HAL3S Reviews

See any errors on this page?
Whatever You Need, We've Got It