Video Chat with a Pro Audio Expert - Live

Peavey Versarray 124 Sub 24" Subwoofer (Black)

BH #PEV124S24SW • MFR #03611530
Print
Peavey Versarray 124 Sub 24" Subwoofer (Black)
No Longer Available
No Store Display
Ask an Expert
800-606-6969

Peavey Versarray 124 Overview

The black Peavey Versarray 124 Sub is a direct radiator vented subwoofer designed specifically for demanding pro audio applications. The Beast 24" subwoofer driver has 2200W program rating and extra-long cone excursion that add up to excellent levels of clean, deep bass. Incorporating a 5-inch diameter voice coil with dual spiders and long-throw construction designed in from the start, this deep bass subwoofer driver goes down low and loud. Primarily designed for professional touring and permanent installation, the Versarray 124 Sub is suitable for the bottom end of virtually any high performance sound system.

The subwoofer's cabinet is constructed of premium 13-ply Baltic birch plywood and is finished with a tough, durable Hammerhead polyurea finish, for good looks and durability. A 16-gauge powder-coated perforated metal grille covers the front of the system to protect the speaker from external damage. The cabinet is well braced and very stiff, as internal pressures produced by The Beast subwoofer driver can be very high. Each cabinet side wall and vent wall are tied together at multiple points using multiple interlocking girdle braces, which makes the enclosure sturdy.

The Versarray 124 Sub incorporates Peavey's patented UniVent venting system that pumps air through the enclosure, exchanging the stale hot air inside the cabinet for the cooler outside air. This helps maintain the optimal operating temperature and increases reliability and reduces power compression under heavy continuous drive conditions. The air pumping action is achieved without excessive turbulence or any significant net asymmetry of total vent airflow. The large dual vent area and long path length allow for a large volume of air to move with very low resistance. This is important due to the huge airflow volumes that The Beast subwoofer driver can produce.

Input connection to the system is provided via two 4-pin Neutrik jacks in parallel, or an 8-pin Neutrik jack. A 4-pin Neutrik thru jack is provided for bi-amping flexibility while maintaining superior signal integrity. The inclusion of a standard 4-pin Neutrik jack in parallel for the main inputs allows for daisy chaining to another cabinet.

The Versarray 124 Sub can put out serious sound levels, and handle 2,200W of clean amplifier program power, resulting in large area coverage with excellent punch and high reliability.

Uses Peavey The Beast 24" Subwoofer
Extended frequency response down to 32 Hz (half-space)
2200W of program power rating
Patented UniVent vented cooling system
Full Power Low Frequency Response down to 36 Hz
Four casters on the back with 4" wheels
Two pairs of heavy-duty steel handles
Black Hammerhead polyurea finish
16-gauge steel grille for speaker protection
Made in USA

Peavey Versarray 124 Specs

Transducer
1 x 24" (61 cm) vented Peavey The Beast subwoofer driver, with 5.0" (12.7 cm) voice coil and dual spiders
Frequency Response
Anechoic Environment: 40 to 800 Hz (±3 dB)
Half-Space Environment: 37 Hz
Usable Low Frequency Limit
-10 dB Point
Anechoic Environment: 34 Hz
Half-Space Environment: 32 Hz
Power Handling
1100 W continuous, 2200 W program, 4400 W peak
SPL
1W/1m
Anechoic Environment: 99 dB (2.83 V input)
Half-Space Environment: 105 dB
Maximum Sound Pressure Level (SPL)
3.3' (1 m)
Anechoic Environment: 129 dB continuous; 135 dB peak
Half-Space Environment: 135 dB continuous; 141 dB peak
Box Tuning Frequency
39 Hz
Crossover Frequency
Frequency Region and Slope
Recommended Active Low-Pass Filter: 120 Hz @ 18 dB/octave minimum
Recommended Active High-Pass Filter: 34 Hz @ 24 dB/octave minimum
Impedance
8Ω nominal, 7.5Ω minimum
Input Connections
2 x 4-pin Neutrik Speakon inputs in parallel
1 x 8-pin Neutrik Speakon input
1 x 4-pin Neutrik Speakon thru (for use with 8-pin Input)
Enclosure Material
0.7" (1.8 cm) 13-ply Baltic birch plywood finished in Hammerhead polyurea coating
Mounting
6 x rubber feet for floor use
Dimensions
Without Casters: 43.3 x 27.8 x 27.8" (110.0 x 70.6 x 70.6 cm)
With Casters: 43.3 x 27.8 x 32.2" (110.0 x 70.6 x 81.8 cm)
Weight
220 lb (100 kg)

Peavey Versarray 124 Reviews

See any errors on this page?
Whatever You Need, We've Got It