Video Chat with a Pro Audio Expert - Live

RCF NX L24-A Active Two-Way Column Speaker Array (1400W)

BH #RCNXL24A • MFR #NX-L24A
Print
RCF NX L24-A Active Two-Way Column Speaker Array (1400W)
No Longer Available
No Store Display
Ask an Expert
800-606-6969

RCF NX-L24A Overview

The NX L24-A Active Two-Way Column Speaker Array from RCF is a 1400W active column speaker array system. It is composed of four 6" woofers, and a 2.5" voice coil compression driver, which is loaded from a waveguide on a 100° x 30° constant directivity horn. It is designed to allow coherent sound dispersion while minimizing lobing in a compact enclosure.

The wide coverage horizontal angle and the controlled vertical dispersion allow for correct sound reproduction serving a wide area and assistance in limiting feedback and reverberated sound. The integrated DSP manages crossover, equalization, soft limiter, compressor and dynamic bass boost protections. Equalizations are available to operate with a single column or in pairs.

The ND 640 compression driver is loaded from a waveguide to a constant directivity 100° x 30° horn. The ND 640's 2.5" voice coil allows a crossover point of 800Hz, which allows a wide vocal range to be produced by this driver. The NXL 24-A is powered by a 1400W peak power digital amplifier, split 400W for the HF and 1000W for the LF. The DSP handles the processing within the cabinet and allows adjustment for a single column application or HF close coupling application.

The NXL 24-A presents a SMPS power supply section in order to produce maximum output and reduce transportation weight. A Mic/Line switch to adjust the input sensitivity is provided. When used just for speech, the Mic setting allows to use a microphone directly with the speaker. Set the selector to Line when using the speaker for live music or playback. A back-panel volume knob allows to set the overall volume of the speaker according to its application. This unit provides Power, Signal, and Status LEDs for monitoring the system.

Using its accessory is possible to fly 2 NXL 24-A units in HF close coupling configuration with a choice of three possible angles (0°, 15°. 20°). It is also possible to pole mount the system and due to a second pole mount on top of the cabinet, it is possible to couple two units. The cabinet is equipped with four rubber protections and two aluminum side handles for rental use and easy transportation. NXL 24-A cabinet is enclosed in Baltic Birch Plywood with internal structural metal bracings

Low Frequencies
1.5" Inside-Outside voice coil
Water resistant fiber doped cone
Polycotton M-roll surround
High power magnetic structure
Edge Wound Voice Coils
To ensure increased linear frequency response and maximum SPL output
High Frequencies
ND 640 large format compression driver, with a 2.5" voice coil allows a crossover point of 800Hz, and a large vocal range production
Inside/Outside Voice Coils
The dissipation surface is doubled - the adhesion area to the former is doubled - during thermal expansion the former is squeezed between inside and outside layers offering mechanical resistance.
Specific designed waveguide
ND 640 compression driver loaded from a waveguide to a constant directivity 100° x 30° horn.
DSP
DSP controlled Input section with single or dual equalizer preset
Mounting
Pole mountable, stackable, and flyable
Construction
Baltic Birch Plywood enclosure with internal structural metal bracings

RCF NX-L24A Specs

Frequency Response
65 Hz to 20 kHz
Maximum Sound Pressure Level (SPL)
131 dB
Coverage Angle
Horizontal: 120°
Vertical: 30°
Compression Driver
2" (5.1 cm)
2.5" (6.4 cm) voice coil
Woofer
4 x 6.0" (15.2 cm)
1.5" (3.8 cm) voice coil
Input Sensitivity
-2 dBu / + 4 dBu
Crossover Frequencies
800 Hz
Protection
Themel, RMS
Limiter
Soft limiter
Frequencies
High: D / 400 W Peak 200 RMS
Low: D / 1000 W Peak 500 RMS
Connectors
1 x 3-pin XLR female, audio input
1 x 1/4" phone jack, audio input
1 x 3-pin XLR male, signal output
1 x PowerCON, power input
1 x PowerCON, power output
Controls
1 x Volume
1 x Flat/Boost
1 x Input sensitivity switch
1 x Power main switch
LED Indicators
1 x Limiter, red
1 x Signal, green
1 x Power status, green
Power Supply
Switching 1400 W
Peak 700 RMS
Cooling
Convection
Mounting
Mount, stack, fly
Dimensions
41.6 x 7.9 x 10.8" (105.6 x 20.1 x 27.4 cm)
Weight
58.8 lb (26.4 kg)
Packaging Info
Package Weight
62.4 lb
Box Dimensions (LxWxH)
45.75 x 12.5 x 8.75"

RCF NX-L24A Reviews

See any errors on this page?
Whatever You Need, We've Got It