Holiday Kickoff

Pelco Sarix IMP Series IMP219-1EP 2MP Environmental Day/Night Pendant Mount Mini Dome IP Camera with 3 to 9mm Lens (Light Gray)

BH #PEIMP2191EP • MFR #IMP2191EP
Print
Pelco Sarix IMP Series IMP219-1EP 2MP Environmental Day/Night Pendant Mount Mini Dome IP Camera with 3 to 9mm Lens (Light Gray)
No Longer Available
No Store Display
Ask an Expert
800-606-6969

Pelco IMP219 Overview

The light gray Sarix IMP Series IMP219-1EP 2MP Environmental Day/Night Pendant Mount Mini Dome IP Camera from Pelco features a 3 to 9mm remote-zoom autofocus lens for wide-angle or long-range surveillance needs. Autofocus capability ensures that the camera can be automatically refocused when needed. The camera features advanced color accuracy and a mechanical IR-cut filter for increased sensitivity in low-light installations.

This Sarix Professional range camera supports up to two simultaneous video streams and a third service stream. The two streams can be compressed with efficient H.264 High or Main profiles or MJPEG formats. The streams can be configured to a variety of frame rates and variable bit rates to optimize image quality with bandwidth and storage efficiency.

The simple motion detection algorithm allows the camera to record or send an alarm when there is motion detected in a selected zone or within the entire scene. A camera sabotage alarm is triggered if the lens is obstructed or when the camera is repositioned. The camera uses a standard Web browser interface for easy remote setup and administration. Controls are optimized for convenient one-step camera configuration for features including color, exposure, flicker control, and streaming. The inclusion of a microSD card slot allows for recording video clips of varying lengths to be stored on the memory card (not included) upon alarm, or video can be written continuously to the microSD card in case of network outage. Video can be retrieved from the card through the FTP protocol.

The mini dome IP camera can seamlessly connect to Pelco video management systems such as Endura version 2.0 (or later) and Digital Sentry version 7.3 (or later). In addition, it can integrate with major third-party video management systems through the Pelco API and other third-party software and systems through the open ONVIF Profile S standard.

2MP resolution
Up to 30 images per second (ips) at 1920 x 1080
Autofocus motorized remote zoom lens
Accessible edge storage with microSD card
Motion detection and camera sabotage detection
Operating temperature from 14 to 122°F (-10 to 50°C)
Power over Ethernet (PoE) and 24VAC power input
Compatible with Pelco and third-party video systems
1.5" NPT thread for use with Pelco wall mounts (not included)
IP66 ingress protection
IK10 (20J) impact resistance
Easy to install
ONVIF Profile S and Profile G conformant
Light gray, RAL 7047 finish with satin texture

Pelco IMP219 Specs

Camera
Sensor
1/3.2" CMOS
Sensor Resolution
2.1 MP, 1920 x 1080
Imager Readout
Progressive scan
Electronic Shutter Speed
1/5 to 1/10,000 sec
Dynamic Range
65 dB
White Balance
2,500 to 8,000 K
Noise Reduction
Digital (on/off selectable)
Mechanical IR Cut Filter
Auto/Manual selectable with different set points on lux
Minimum Illumination
f/1.2, 33 ms: 0.30 lux color, 0.10 lux mono
f/1.2, 200 ms: 0.02 lux color, 0.01 lux mono
Pan/Tilt Adjustment
Manual; 355° pan, 75° tilt, 360° rotate
Mount Type
Pendant mount
Lens
Type
Built-in; varifocal
Focal Length
3 to 9 mm, f/1.2
Focus
Autofocus, motorized
Zoom
Remote
Auto Iris
DC drive, P-iris
Field of View
4:3 Aspect Ratio:
Diagonal: 85° (W), 29° (T)
Horizontal: 67° (W), 23° (T)
Vertical: 49° (W), 17° (T)

16:9 Aspect Ratio:
Diagonal: 94° (W), 32° (T)
Horizontal: 81° (W), 28° (T)
Vertical: 44° (W), 16° (T)
Video
Video Streams
Up to 2 simultaneous streams, plus service stream; the secondary stream is variable based on the setup of the primary stream
Video Overlay
Camera name, time, date
Available Resolutions
16:9 Aspect Ratio:
2.1 MP (1920 x 1080)
0.9 MP (1280 x 720)
0.6 MP (1024 x 576)
0.5 MP (960 x 540)
0.1 MP (320 x 180)

4:3 Aspect Ratio:
1.9 MP (1600 x 1200)
1.2 MP (1280 x 960)
0.5 MP (800 x 600)
0.3 MP (640 x 480)
0.1 MP (320 x 240)
Frame Rates
30 (full), 20, 25, 16.67, 15, 12.5, 10, 5, 1 ips
Video Encoding
H.264 High or Main profiles, and MJPEG
Bitrate Control
Constant bit rate (CBR), constrained variable bit rate (VBR) with target range
Stream Type
Service: 320 x 240 (0.1 MP) or 320 x 180; 2 ips, MJPEG
Window
Window Blanking: 4 configurable windows
Audio
Streaming
Dual-channel
Input
Line in/terminal block
Encoding
G.711 A-law/G.711 U-law
Networking
Port
RJ-45 connector for 100Base-TX
Supported Protocols
TCP/IP, UDP/IP (unicast, multicast IGMP), ICMP, IPv4, SNMP v2c/v3, HTTP, HTTPS, SSL, SSH, SMTP, FTP, RTSP, UPnP, DNS, NTP, RTP, RTCP, LDAP (client), QoS
Users
Unicast: 1 administrator, up to 4 viewers
Multicast: Unlimited users H.264
Security Access
Multiple user access levels with password protection
Alarm
Input
1
Output
1; PhotoMOS relay (30 V, 1 A)
Triggers
Unsupervised mode that detects switch closures (N.O. and N.C.)
Integration
Video Management Software
Digital Sentry 7.3 (or later), Endura 2.0 (or later), third-party VMS through Pelco API 1.0, and ONVIF Profile S
Mobile Application Support
Integrated to Pelco Mobile App
Video Motion Detection
Simple motion detection and camera sabotage
Local Storage
Capture 5- or 10-sec video clips on camera sabotage, motion detection, or alarm input
Record video continuously in the case of network outage with the option to overwrite
Video access through FTP protocol and ONVIF Profile G
Firmware Upgrade
Cameras discovered and firmware upgrade through Pelco Device Utility 2 version 2.2 and Endura Utilities
Web Browser Support
Microsoft Internet Explorer 9.0, Apple, Safari 7.0.6, Mozilla Firefox 31.0, Google Chrome 37.0.2062.124 m and later
Power
Input
PoE (IEEE 802.3af) Class 3; 24 VAC nominal, 18 to 32 VAC range
Consumption
< 8 W
Certifications and Approvals
Certifications
CE - EN 55022 (Class A), EN 50130-4, EN 60950-1
FCC (Class A) - 47 CFR Part 15
UL and cUL Listed - UL 60950-1, CAN/CSA-C22.2 No. 60950-1-07
ICES-003
KCC
NOM
Environmental
Temperature
Operating: -40 to 122°F (-40 to 50°C)
Storage:-40 to 140°F (-40 to 60°C)
Humidity
Operating: 15 to 85%, RH condensing
Storage: 20 to 80% RH non-condensing
General
Memory Card Support
Up to 32 GB microSDHC or SDXC card
Construction
Die-cast aluminum; polycarbonate bubble
Ingress Protection Rating
IP66 per IEC 60529
Vandal Resistant
IK10 (20 J impact) per IEC 62262
Dimensions
7.3 x 5.9" (18.5 x 15.0 cm)
Weight
1.79 lb (0.81 kg)

Pelco IMP219 Reviews

See any errors on this page?
Whatever You Need, We've Got It