Holiday Kickoff

Video Chat with a Pro Audio Expert - Live

Radial Engineering Twinline FX Router for Two Guitar Amplifiers

BH #RATLFXR2A • MFR #R800 1430
Print
Radial Engineering Twinline FX Router for Two Guitar Amplifiers
Key Features
  • Share Effects Between Two Amplifiers
  • Use with Pedals or Balanced Processors
  • Two Amp FX Loops with Ground Lifts
  • Balanced XLR FX Loop
The Twinline FX Router from Radial Engineering allows you to use your entire pedalboard of effects with two different guitar amps at the same time. The Twinline begins with two effects loop connections for the two amps, each of which is equipped with send and return 1/4” jacks along with individual send and return level controls plus a polarity reverse to ensure the amps and pedals are in phase with each other.
More Details
No Longer Available
No Store Display
Ask an Expert
800-606-6969

Radial Engineering R800 1430 Overview

The Twinline FX Router from Radial Engineering allows you to use your entire pedalboard of effects with two different guitar amps at the same time. The Twinline begins with two effects loop connections for the two amps, each of which is equipped with send and return 1/4” jacks along with individual send and return level controls plus a polarity reverse to ensure the amps and pedals are in phase with each other.

A third send and receive effects loop is then used to connect to the pedalboard using 1/4” hi-Z jacks or balanced low-Z XLRs for use with studio-grade professional line-level effects. Switching between the loop may be performed using the front panel A/B switch or via the optional JR2 remote control footswitch (available separately).

Radial Engineering R800 1430 Specs

Audio Circuit Type
Class A FET with transformer isolation
Dynamic Range
105 dB
Gain
From amp jack to EFX send: Variable from -2.7 to +3.6 dB
Equivalent Input Noise
103 dB
Noise Floor
-92 dBu
Intermodulation Distortion
0.01%
Common Mode Rejection Ratio
91 dB @ 55 Hz
Maximum Input
From amp jack: +25 dBu
FX input: +8dBu
Total Harmonic Distortion
0.005% @ 1 kHz
Input Impedance
From amp: 10 kOhms
FX return: 1 MOhm
Output Impedance
To amp: 2200 Ohms
FX send: 1 kOhm
Power
15 V 100 mA unregulated / Center pin positive
Controls
Send & return gain for amps A & B
Switches
180° polarity reverse on each effect loop
Input/Output Connections
Balanced 1/4" TRS or unbalanced 1/4"
Ground Lift
Both inputs and on the FX loop
Remote Control
Slingshot contact closure in/out
Construction
14-gauge steel chassis & outer shell
Finish
Durable powder coat
Dimensions
4.3 x 1.9 x 5.8" (109 x 48 x 147 mm)
Weight
2.4 lb (1.1 kg)

Radial Engineering R800 1430 Reviews

See any errors on this page?
Whatever You Need, We've Got It