Ride safely on the road or trail with Fenix's BT30R LED Bike Light. It features four standard outputs from a low 100-lumens to a high of 1200, with a darkness-piercing 1800-lumen Burst mode, and a 200-lumen flashing mode to increase your visibility. Its Dual Distance Beam system uses a total-reflection lens to simultaneously direct the beam immediately in front of wheel and far into the distance without holes or blind spots to ensure the maximum amount of road or trail is illuminated. The lens also throws the beam in a wide flood to give you ample viewing distance to either side of you. Its anti-glare beam configuration directs the beam downward so it won't blind oncoming pedestrians or motorists.
To increase your safety, the light comes with a remote pressure pad switch that gives you instant access to the burst mode, even if the light is off, without having to remove your hand from the bars. The housing is made of a corrosion and heat-dissipating aluminum alloy with a corrosion and scratch-resistant anodized finish. It is impact-resistant to 3.3' and IPX6-rated to be weatherproof for use in most conditions. The light is powered by a 2600mAh, 7.4V rechargeable battery pack that comes with its own handlebar mount, charger, and extension cable. A quick-attach/detach handlebar mounting system, sized for bars from 22mm to 35mm, is included.
- Low: 100 lumens
- Med: 200 lumens
- High: 500 lumens
- Turbo: 1200 lumens
- Burst: 1800 lumens
- Two Cree XM-L2 (T6) neutral white LEDs
- Neutral white light provides enhanced color rendition for better overall visibility
- High-visibility 200 lumen flashing mode
- Proprietary Dual Distance Beam System uses a total-reflection lens to direct beam immediately in front of wheel and into the distance without holes or blind spots
- Anti-glare beam design directs light down to not blind pedestrians or motorists
- Digitally regulated output provides consistent beam intensity throughout the life of batteries
- Type: Pushbutton
- Location: Top of head
- Constant-on mode only
- Press and hold for 2 seconds, then press to cycle through outputs and modes
- Instant Burst mode with included remote pressure switch even if light is off
- Lightweight and heat-dissipating aluminum housing
- Corrosion and scratch-resistant anodized finish
- Impact resistant to 3.3' and IPX6-rated to be weatherproof
- Quick attach and detach handlebar mount sized for 22mm-35mm handlebars
- Heat dissipating fins integrated into body design
- Integrated low-power indicator
- Runs on included rechargeable battery pack with over-discharge, overcharge and overheat protection circuitry