FiiO X3 (2nd Gen) Portable High Resolution Audio Player (Titanium)

BH #FIX32TI • MFR #X3-II
Print
FiiO X3 (2nd Gen) Portable High Resolution Audio Player (Titanium)
Key Features
  • Audio Player & USB DAC
  • Supports up to 24-Bit / 192 kHz
  • Native DSD Playback
  • Supports WAV, FLAC, AAC, MP3, & More
The titanium X3 (2nd Gen) from Fiio is a portable high resolution audio player and USB-DAC for audio enthusiasts. The unit features an audiophile grade architecture and premium components capable of playing files up to 24-bit/192 kHz in a variety of formats including native DSD, WAV, WMA, ALAC, FLAC, APE, AIFF, and more. The X3-II utilizes a Cirrus Logic CS4398 DAC coupled to a finely tuned low-pass filter offering extremely low noise and phase distortion. Additionally, the tantalum capacitors in the analog circuit provide minimal internal resistance for the best uncolored sound. Dual crystal oscillators ensure the lowest jitter and highest precision playback of music at any sample rate, eliminating conversion artifacts.
More Details
No Longer Available
No Store Display
Ask an Expert
800-606-6969

FiiO X3 Overview

The titanium X3 (2nd Gen) from Fiio is a portable high resolution audio player and USB-DAC for audio enthusiasts. The unit features an audiophile grade architecture and premium components capable of playing files up to 24-bit/192 kHz in a variety of formats including native DSD, WAV, WMA, ALAC, FLAC, APE, AIFF, and more. The X3-II utilizes a Cirrus Logic CS4398 DAC coupled to a finely tuned low-pass filter offering extremely low noise and phase distortion. Additionally, the tantalum capacitors in the analog circuit provide minimal internal resistance for the best uncolored sound. Dual crystal oscillators ensure the lowest jitter and highest precision playback of music at any sample rate, eliminating conversion artifacts.

The player offers a standard 1/8" / 3.5mm headphone output and a separate line out/digital (coaxial) out via 1/8" / 3.5 mm. The X3II has no on-board memory, but uses a microSD card slot supporting up to 128 GB. The 2600 mAh Li-polymer battery provides up to 11 hours of playback under normal conditions. The user interface (UI) offers six unique themes, while the classic scroll wheel and 2.0" TFT display offer easy navigation, which supports browsing and playback via folders, songs, albums, artists, genres, favorites, and playlists. The 10-band graphic EQ and the 120-step digital volume control allow for custom tailored sound and levels.

The chassis is made of aluminum alloy and features a high reflectance fine-grain faceplate. The X3-II ships with a 3' / 1m high-current micro-USB data/charging cable, an 1/8" / 3.5mm coaxial S/PDIF adapter, a hard-shell case, two screen protectors (1 applied in-factory), and a set of three Bodywork stickers (USA flag, wood grain, and carbon fiber).

  • Song Playback - Supports Browsing and Playback via Folders:
    • All Songs
    • Albums
    • Artist
    • Genres
    • Favorites
    • Playlists
  • Play Mode: Sequential, Shuffle, Loop Single, Loop All
  • Resume After Power Off: Can resume from last song or last position before power off
  • Library Management:
    • Supports adding and managing favorites and playlists on player
    • Supports deleting favorites, playlists, songs and folders on player
    • Supports batch deletion
  • Hibernation: Player can automatically enter hibernation for instant wake-up / playback with minimal battery drain
  • Screen Saver: Custom defined screen timeout time
  • CUE Sheet Supported: Supports splitting songs by CUE sheets and skipping though tracks within cue sheet
  • Themes: 6 different built-in themes
  • Playback Display: Supporting embedded / external / folder-based album art, lyrics and ID3 display
  • Gapless playback supported
  • Volume Control: 120 steps digital potentiometer
  • Output Protection: Power supply safety control over analog circuit
  • Gain Setting: Switchable between high and low gain
  • Equalizer: 10-band EQ (±6 dB)
  • Hearing Protection: Customizable max volume setting to protect hearing
  • Balance: Max bias 5 dB L/R (0.5 dB increments)
  • On / Off Transients: Output relay prevents on / off transients
  • Headphone Detection: Playback pauses on headphone disconnection
  • Internal Battery: 2600mAh 3.7V Li-polymer
  • Playtime: >11 hours (32 ohms; normal volume with display off)
  • Firmware upgrade via microSD card (formatted in FAT32 via the X3)
  • Data Transfer: Micro-USB 2.0 high speed

FiiO X3 Specs

Connections
Line Out
1/8" / 3.5 mm (Shared line out / S/PDIF coaxial out)
Digital Output
1/8" / 3.5 mm (Shared line out / S/PDIF coaxial out)
DAC
USB DAC: Supports up to 24-bit / 192 kHz and DSD (driver installation required)
Headphone
1/8" / 3.5 mm
Line Output
THD + N
<0.001% (1 kHz)
Frequency Response
20 Hz to 20 kHz
Crosstalk
>102 dB (10 kOhms / 1 kHz)
Signal to Noise Ratio (SNR)
≥114 dB (A-weight)
Dynamic Range
≥101 dB
Line Output Level
1.45 Vrms (10 kOhms / 1 kHz)
Headphone Output
Output Power
Output Power 1: >224 mW (16 ohms / THD+N <1%)
Output Power 2: >200 mW (32 ohms / THD+N <1%)
Output Power 3: >24 mW (300 ohms /THD+N <1%)
Frequency Response
20 Hz to 20 kHz
Signal-to-Noise Ratio (SNR)
≥113 dB (A-weighted)
Output Impedance
<0.2 ohms (32 ohms)
Crosstalk
>74 dB (1 kHz)
THD+N
<0.001% (1 kHz)
Maximum Output Voltage
>7.2 Vp-p
Maximum Output Current
>75 mA (For reference)
Power and Battery Options
Power
USB Charger: 5 VDC 2A (recommended)
Computer USB Port: 450 mA
Battery Charge Display
Red light indicates, green light turns on after fully charged
Battery Display
Yes (accurate battery % readings))
Battery Capacity
2600 mAh, 3.7 V Li-polymer
Battery Life
>11 h (32 ohms; normal volume with display off )
Charging Time
Computer USB Port: Approximately 8 hours
2 A USB Charger: Approximately 3 hours
Supported Audio Formats
Audio Formats
Lossless
DSD: DSD64, DSD128 (.iso, .dsf & .dff)
APE(Fast): 192 kHz/24-bit
APE(Normal): 96 kHz/24-bit
APE (High): 96 kHz/24-bit
FLAC: 192 kHz/24-bit
WAV: 192 kHz/64-bit
WMA Lossless: 96 kHz/24-bit
Apple Lossless: 192 kHz/24-bit

Lossy Compression
MP2, MP3, AAC, ALAC, WMA, OGG
General Specifications
Model Name
X3 (X3 2nd gen)
Color
Titanium
Material of Construction
Aluminum Alloy
Chipset
SoC: JZ4760B
DAC: CS4398
LPF: OPA1642
OP: OPA1642+LMH6643
Memory Capacity
128 GB via microSD Card
Display
2.0" TFT screen, 320 x 240 pixels
Drive Ability
16 to 150 ohms
Volume Control
120 steps digital potentiometer
Equalizer
10-band equalizer (±6 dB)
Balance Control
5 dB
Gain
Gain Low: 2.6 dB
Gain High: 8.6 dB
Dimensions
3.8 x 2.3 x 0.6" / 96.7 x 57.7 x 16.1 mm
Weight
4.8 oz / 135.0 g
Packaging Info
Package Weight
1 lb
Box Dimensions (LxWxH)
6.6 x 5.1 x 2.2"

FiiO X3 Reviews

See any errors on this page?
Whatever You Need, We've Got It