Video Chat with a Pro Audio Expert - Live

Shure Active UHF Directional Antenna with FlexiMount Base Kit

BH #SHUA874USFMK (B&H Kit)
Print
Shure Active UHF Directional Antenna with FlexiMount Base Kit
Key Features
  • Shure UA874 Active Directional Antenna
  • Scorpion Gooseneck Mount for Microphone
  • Frequency Range 470 to 698 MHz
  • For Shure UHF Wireless Mic Systems
The Active UHF Directional Antenna with FlexiMount Base Kit from B&H consists of a Shure UA874 UHF antenna and a Stage Ninja Scorpion MIC12CB gooseneck mount for microphone (clamp base). The stand securely mounts the Shure antenna and can be accurately positioned for optimum audio results. It is designed for quick setup in several environments.
More Details
In Stock
No Store Display
Free 2-Day Shipping
Protect Your Gear
Add a protection plan from $38.99
Ask an Expert
866-264-7509
Kit Contains:

The Active UHF Directional Antenna with FlexiMount Base Kit from B&H consists of a Shure UA874 UHF antenna and a Stage Ninja Scorpion MIC12CB gooseneck mount for microphone (clamp base). The stand securely mounts the Shure antenna and can be accurately positioned for optimum audio results. It is designed for quick setup in several environments.

Shure UA874 Active Directional Antenna

The Shure UA874 Active Directional Antenna uses a log periodic dipole array to offer enhanced reception when directed toward the desired coverage area. An integrated amplifier and four gain settings compensate for varying degrees of coaxial cable signal loss. The UA874 can be mounted on a microphone stand, suspended from the ceiling or mounted to a wall using the integrated swivel adapter bracket.

Compatible with all Shure wireless receivers and antenna distribution systems that provide 12 V DC bias
Four-position gain selector switch
Low-noise signal amplifier that compensates for transmission loss in coaxial cable
Integrated threaded adapter that mounts easily to microphones stands
UPC: 042406256308
Stage Ninja Scorpion Gooseneck Mount for Microphone (Clamp Base)

The Stage Ninja Scorpion Gooseneck Mount for Microphone (Clamp Base) is a 12" (30.4 cm)-long, 360° / ¾” Gooseneck arm designed to mount a microphone. It features an industrial-grade steel Clamp Base with dual step rubber jaws to prevent marring that can hold onto a stand or a rod.

12" (30.4 cm)-long Gooseneck mount for a microphone
360°, ¾" Gooseneck for easy setup of your microphone
An industrial-grade steel Clamp Base to hold onto a stand or a rod
Dual step rubber jaws to prevent marring
Made in the USA
UPC: 896507001448

Shure UA874 Specs

Antenna
Array Type
Log Periodic Dipole Array
Beamwidth
70°
Gain
7.5 dBi
Third-Order Intercept Point (OIP3)
>30 dBm
Connectivity
Input/Output
1x Coaxial BNC Female
Power
Impedance
50 Ohms
Input Power
10 to 15 VDC
Physical
Operating Conditions
0 to 145°F / -18 to 63°C
Storage Conditions
-20 to 165°F / -29 to 74°C
Dimensions
ø: 14.1 x H: 12.4 x W: 1.4" / ø: 359 x H: 316 x W: 36 mm
Weight
11.2 oz / 317 g
Packaging Info
Package Weight
2.305 lb
Box Dimensions (LxWxH)
18.7 x 15.5 x 3.7"

Shure UA874 Reviews

Fast delivery!

By Orlando
Rated 5 out of 5
Date: 2026-05-04

I ordered this piece of equipment that I needed for an event within days. I received it the day after I ordered which saved me from having to worry about any rentals.

Signal drop outs in the church sanctuary are gone!

By Scott
Rated 5 out of 5
Date: 2022-05-16

We purchased two of these to help remedy signal drop out from our new SHURE wireless systems. We had installed the mics in the same rack that the old ones came out of, but we had very low and even loss of total signal during our first two uses. After purchasing and installing these, we have had nothing but full signal and we could not be happier. These worked like magic!

See any errors on this page?

Can I split the RF output of this to 2 receivers ...

Can I split the RF output of this to 2 receivers using a BNC-TEE, or do I need an RF splitter?
Asked by: Eric
You would be able to accomplish this using the UA221. https://www.bhphotovideo.com/c/product/1335931-REG/shure_ua221_rsma_reverse_sma_passive_antenna.html
Answered by: Moe
Date published: 2022-10-26

What is the recommended distance between the ...

What is the recommended distance between the antennae in a two paddle array?
Asked by: Steve
The Shure UA874 Active Directional Antennas should be separated by a minimum of one-quarter wavelength to ensure adequate diversity performance, which is about 4 inches for UHF frequencies. The diversity reception can then be improved by separating the antennas further to ensure line-of-sight with at least one of the antennas from any location in the room.
Answered by: Lisa S
Date published: 2025-01-08

Are these made for permanent outdoor use?

Are these made for permanent outdoor use?
Asked by: Jerald
They can be mounted permanently or used in a mobile kit. They are large paddles and improve the pickup of the wireless frequency being broadcast by the mics. We have a set at our church permanently and I have a set in a Shure wireless 4 pack I rent for productions work.
Answered by: Argyl
Date published: 2022-06-29

The unit says this is good for 470-698 MHz. The ...

The unit says this is good for 470-698 MHz. The headline says 470-900. Please, what is correct?
Asked by: Chris
The item pictured is the US version 470-688. The item you are selling is the WB 470-900. this is confusing to your customers. Change the picture.
Answered by: Chris
Date published: 2024-09-04

If I am placing my receiving units relatively ...

If I am placing my receiving units relatively near the transmitters and using a snake box to the mixer is there a need for this antenna? It was included in my quote - possibly unnecessarily. Thanks.
Asked by: Anonymous
No, in the situation as you describe the antenna is not necessary.
Answered by: John
Date published: 2019-08-21

question

how many microphones can connect too this ?
Asked by: Anonymous
This antenna can receive signal from any number of active transmitters within range (based on the antenna's position and gain settings) that are transmitting between 470698 MHz. To clarify, this item's purpose in your wireless setup is to act as an extension of your receivers which, when properly placed and configured according to your application, can improve your transmitter(s) signal reception. However, it should be noted that your receivers are the devices that are actually connecting (or syncing) with your transmitters to interpret the captured signal of each active wireless microphone or bodypack. Thus, any limitations in number of transmitters you are able to use simultaneously would be based on the capabilities and coordination of your receivers rather than the number or type of antennas you are using.
Answered by: Product Rep Shure Expert
Date published: 2020-02-22

question

do I need one or tow of these?
Asked by: Anonymous
This would depend on whether your specific application calls for a diversity or non-diversity wireless system and what kind of coverage is needed. In many circumstances however, using two is most common.
Answered by: Product Rep Shure Expert
Date published: 2022-04-05
  • y_2026, m_6, d_6, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_1148780, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_bhphotovideo
Whatever You Need, We've Got It