Amimon CONNEX Wireless HD Video Link for UAVs

BH #AMN0811MS01 • MFR #AMN0811MS_01
Print
Amimon CONNEX Wireless HD Video Link for UAVs
Key Features
  • 1080p60 Video Monitoring from the Air
  • HDMI Input and Output
  • Up to 3300' Line-of-Sight Range
  • Less Than 1 ms Latency
Whereas traditional 5.8G analog systems limit you to SD resolution, with the CONNEX Wireless HD Video Link for UAVs from Amimon , you will be able to view a live, near-zero latency, feed from a UAV-mounted camera at up to 1080p60 resolution. Suitable for monitoring, FPV, and gimbal operation, the system features a range of up to 3300' line-of-sight (depending on conditions). It incorporates an S.BUS relay so that gimbal controls for S.BUS-compatible gimbals can be relayed to back to the aircraft (gimbal remote available separately), and can display OSD data from MAVLINK telemetry modules (telemetry system available separately). The video transmission in encrypted to help prevent eavesdropping. The transmitter can link to up to four receivers, for example allowing the pilot and camera operator to each have their own monitor or FPV goggles (additional receivers available separately).
More Details
Special Order
Expected availability: 7-14 Business Days
No Store Display
This item cannot be canceled or returned.
Free Standard Shipping
Ask an Expert
212-444-6615

Amimon CONNEX Wireless HD Video Link Overview

From Manufacturer

Whereas traditional 5.8G analog systems limit you to SD resolution, with the CONNEX Wireless HD Video Link for UAVs from Amimon , you will be able to view a live, near-zero latency, feed from a UAV-mounted camera at up to 1080p60 resolution. Suitable for monitoring, FPV, and gimbal operation, the system features a range of up to 3300' line-of-sight (depending on conditions). It incorporates an S.BUS relay so that gimbal controls for S.BUS-compatible gimbals can be relayed to back to the aircraft (gimbal remote available separately), and can display OSD data from MAVLINK telemetry modules (telemetry system available separately). The video transmission in encrypted to help prevent eavesdropping. The transmitter can link to up to four receivers, for example allowing the pilot and camera operator to each have their own monitor or FPV goggles (additional receivers available separately).

Cables and mounting hardware are included. The air unit is designed to power from the flight battery, while the ground unit includes an AC adapter. The ground unit can also power from a separately available 7 to 19 VDC source for added flexibility in the field.

Plug & Fly
CONNEX is designed to setup and get you working out of the box - no complicated binding procedures here
Full HD Resolution
Unlike analog systems, which limit you to SD resolution, the digital CONNEXT system provides support for up to 1080p60
Virtually no Latency
Featuring less than 1 ms of latency, the CONNEX does not buffer or hold your video, so that you can see and control what's happening live. Use CONNEX video to help you fly, aim the camera, or operate the gimbal
5.8G ISM Band Operation
CONNEX uses the 5.1 to 5.8 GHz frequency range to avoid interfering with aircraft control systems, which are usually 2.4 GHz. Automatic Frequency Selection (AFS) will choose the best available channel to be used, and will move seamlessly to an alternative channel on-the-fly if needed
Gimbal Control
CONNEX is able to relay the control signal for an S.BUS-based gimbal mounted on the UAV. Using Futaba S.BUS from the remote control, you can use CONNEX to simultaneously get video from the drone and control the gimbal on it
OSD (On-Screen Display) Overlay
CONNEX On-Screen-Display (OSD) is a great way to see your flight status. The OSD shows both information about your wireless link status, and MAVLINK-based telemetry from your UAV flight controller

Note: MAVLINK telemetry system required to supply OSD data (available separately)
Encrypted Transmission
CONNEX employs AES128 for the video encryption and RSA1024 for key exchange to help ensure no one unauthorized is able to intercept your video feed
UPC: 814114020010

Amimon CONNEX Wireless HD Video Link Specs

Performance
Range
3300' / 1000m (outdoor; line-of-sight)
Latency
> 1 ms
Radio System
Frequency
5.1 to 5.8 GHz
Channel Selection
Automatic frequency selection (AFS)
Multicast Mode
Up to 4 receivers with no delay or quality degradation (requires separately available additional ground unit(s))
Encryption
AES-128 and RSA 1024 for key exchange
Video Formats Supported
Resolutions
1080p: 60, 50, 30, 25, 24
1080i: 60, 50 525i: 60 (NTSC)
625i/50 (PAL)
Telemetry
OSD Support
MAVLINK telemetry-based
Connectivity
Video
Air Unit
1 x mini HDMI

Ground Unit
1 x HDMI (Type A)
Antenna
Air Unit
2 x MMCX

Ground Unit
5 x SMA
Power
Air Unit
8 to 26 VDC (3S to 6S)

Ground Unit
7 to 19 VDC
General
Operating Temperature
32 to 113°F / 0 to 45°C
Dimensions
Air Unit
4 x 2.5 x 0.6" / 102 x 63.6 x 15.6 mm

Ground Unit
5.1 x 3.5 x 0.8" / 129 x 89 x 20 mm
Weight
Air Unit
4.6 oz / 130 g

Ground Unit
9.2 oz / 260 g
Packaging Info
Package Weight
3.41 lb
Box Dimensions (LxWxH)
8.25 x 6.6 x 4.75"

Amimon CONNEX Wireless HD Video Link Reviews

Great Wireless Solution

By Chad
Rated 5 out of 5
Date: 2019-10-28

The Connex wireless systems have worked perfectly for us. We use them for small, wireless cameras in a sports venue. It only has to push video around 400 feet, but it's in an area with lots of RF interference and around 12,000 people. We're running at 1080p with no frame drops.

Great Product- Used with Drone Silencer Follow focus System

By Rob
Rated 5 out of 5
Date: 2015-12-15

Great product! Amazing HD Video with low latency. I used this along with the Silencer Fight Follow focus from 24shots. With this HD link adjusting focus and zoom was very easy. Great combo

See any errors on this page?
Whatever You Need, We've Got It