Ask Our Experts800-606-6969
Hello, Log InAccount & Orders
Video Chat with a Photography Expert - Live
Key Features
- Allows Low Angle Shooting
- 3/8"-16 Mounting Thread
The 190XLAA Low Angle Adapter from Manfrotto replaces the standard center column included with the MT190X3 tripod. Using a short column allows you to take full advantage of the widest leg angle on this model, so that the tripod can reach its minimum height. The column features a standard 3/8"-16 thread for mounting most tripod heads.
More DetailsSee any errors on this page?
will this fit a 055CXPRO3?
will this fit a 055CXPRO3?
No, the Manfrotto 190XLAA Low Angle Adapter for the MT190X3 Tripod will not fit into the Manfrotto MT055CXPRO3 Carbon Fiber Tripod, it's a smaller size.
Date published: 2024-03-28
Isn't this part already attached to the bottom of ...
Isn't this part already attached to the bottom of the center column when you purchase the MT190X3 tripod? In instruction book
The Manfrotto 190XLAA Low Angle Adapter for the MT190X3 Tripod, is intended separately as a replacement or spare for the MT190X3 tripod.
Date published: 2023-02-26
question
Will this work with the 190xpro3?
If you have this tripod Manfrotto MT190CXPRO4 Carbon Fiber Tripod it is not compatible with that adapter.The tripod's center column can be positioned horizontally. This will allow you to lower the legs to very low to the ground.
Date published: 2018-08-26
Hello there i got manfrotto mt190Xpro3 and also ...
Hello there i got manfrotto mt190Xpro3 and also mt290Xta3 can i use this short center colomn with my both tripod legs or only mt190Xpro3 or the other one??? Thank you for your answer.
Manfrotto 190XLAA Low Angle Adapter for the MT190X3 Tripod is compatible with all Manfrotto 190 series tripods.
Date published: 2022-03-23
will this fit a 190CXPRO4?
will this fit a 190CXPRO4?
The Manfrotto 190XLAA Low Angle Adapter for the MT190X3 Tripod is compatible with the 190CXPRO4 tripod.
Date published: 2025-01-28
question
Will this fit the Manfrotto 290 xtra aluminum tripod? The center columns on the 290 and 190 appear the same but no one will let me try the fit. Have queried Manfrotto and they responded that there was not a short center column for the 290 planned.
The center column on the 290 series and the 190 are the same diameter, so this will fit the 290 Xtra. Since the hole in the center of the 290 Xtra is angled, it would be a good idea to use the rubber gasket from the existing center column when mounting with this smaller piece. I just tried it and it works.
Date published: 2021-12-11