News, Tips & Reviews
B&H Gift Cards
The Professional's Source Since 1973
Ask Our Experts800-952-1815
Hello, Log InAccount & Orders
My Cart
Video Chat with a Pro Video Expert - Live
Home

Neutrik SCCD-W Spring-Loaded Cover for Select Chassis Connectors

BH #NESCCDW • MFR #SCCD-W
2 reviews
Print
Neutrik SCCD-W Spring-Loaded Cover for Select Chassis Connectors
Key Features
  • Transparent, Spring-Loaded Cover
  • IP65 Protection Against Dust and Water
  • For XLR, 1/4", USB, HDMI & Other Ports
  • Closes Automatically
The Neutrik SCCD-W Spring-Loaded Cover protects a variety of chassis connectors against dust and water. This IP65-rated, water-resistant cover is spring-hinged, so it closes automatically after you detach a cable from its port. The clear design enables you to still identify the port when the cover is closed. See below for a list of compatible ports.
More Details
In Stock
No Store Display
$14.85
+
Save the Tax‡
when you use the Payboo credit card. Learn More
Ask an Expert
800-952-1815

Neutrik SCCD-W Overview

The Neutrik SCCD-W Spring-Loaded Cover protects a variety of chassis connectors against dust and water. This IP65-rated, water-resistant cover is spring-hinged, so it closes automatically after you detach a cable from its port. The clear design enables you to still identify the port when the cover is closed. See below for a list of compatible ports.

Compatibility

  • XLR D Series female
  • XLR D Series male
  • 1/4" Jacks D Series
  • speakON NL2M* and NL4M*
  • powerCON 20 A Series NAC3MPA* and NAC3MPB*
  • powerCON TRUE1 NAC3MPX
  • opticalCON chassis connectors
  • USB NAUSB-W*
  • HDMI NAHDMI-W*
  • D-SUB NADB*
  • Firewire NA1394-6-W*
  • etherCON D Series
  • etherCON CAT6 chassis connectors
  • etherCON CAT6A chassis connectors
  • BNC D Series
  • Phono (RCA) chassis connectors
Note:
Maximum allowed opening angle during installation is 100°.
Maximum panel thickness is 0.06"/1.5mm in combination with ether CON NE8FD* receptacle.
EAN: 7613187008528

Neutrik SCCD-W Specs

Packaging Info
Package Weight
0.06 lb
Box Dimensions (LxWxH)
3 x 1.5 x 0.5"

Neutrik SCCD-W Reviews

Good quality, Allow for Lots of Space

By Nathan
Rated 4 out of 5
Date: 2026-06-01

Good seals, good quality, but you probably can't fit two on a single gang plate.

Good covers, but a design oversight prevents Decora install

By Mark
Rated 4 out of 5
Date: 2024-05-09

These Neutrik spring-loaded covers (SCCD-W) are designed to work with Neutrik style D-mounts. They seem fairly robust, and they include what appears to be a silicone seal around the perimeter, and a strong spring to keep the cover closed when not in use. This spring should not cause any issues for XLR plugs, but may put stress on some other types of connectors or potentially kink soft or thin cables. (I was using a separate D-mount keystone bracket (ZZ-KMB-NEUT) to install RJ-45 and fiber optic keystone inserts into D-mount openings). I wish there was some easy means of adjusting the spring tension, and/or a detent position to keep the latch open. A workaround would be to insert a small length of dowel, pencil, or other object into the hinge to temporarily keep the latch open, but care must be taken to avoid breaking the cover. I like the clear cover, which helps to identify the type of connector inside, but it would be easier to see if the molded Neutrik logo did not distort the view. The cover assembly is about 3/4 inch (19mm) thick. The covered section is relatively deep, offering about 5/8 in. (16mm) of interior clearance above the surface that it is mounted to.  The cover assembly is fairly large, so it is suitable for jacks that are installed at least 1-1/2 in. (38mm) on center horizontally, and 2-3/4 in. (70mm) O.C. vertically. Be sure to allow at least 2 inches (50mm) of clearance above the center of the jack for the hinge and cover pivot. The cover will open up to about 120 degrees allowing a clear view of the jack without having to get your eyes down to the same level as the jack. These covers appear to be well suited for mobile equipment racks and travel cases, and installations where jack is connected directly to a wall plate.  I was planning to add them to a permanently installed wall box outdoors, but I discovered what I consider to be a significant design oversight: The cover assembly is about 1/16th of an inch (1.6mm) WIDER than the opening of a Decora style wall plate. Because of this, you CANNOT mount this cover to a Decora type strap and simply slip the wall plate over it.  I even tried installing a single-gang wall plate by lifting the cover, turning the plate sideways, and rotating it toward vertical, but there just is not enough clearance to make this work. This makes such installations problematic at best. I suppose I could use a Dremel tool to grind away a little bit of the top third or so of the edges of the wall plate to make it work, but that is an additional hassle, and doing so may compromise the protection of the interior of the box or case. Modifying a split Decora wall plate might work. As a simple alternative, Neutrik offers an all-plastic cover (SCDX-9). It is not as robust as the spring-loaded cover, but it is the next best option that I have found for keeping dust and moisture out of connectors. It has a shallower profile at just 7/16 in. (11mm) thick. The plastic hinge is designed to allow it to flip up and stay in the open position, and it is easy to press and snap the lid closed. Best of all, it does not interfere with Decora wall plate installation or removal, and it is a fraction of the price!

See any errors on this page?

Will this cover work for the switchcraft D panel ...

Will this cover work for the switchcraft D panel rocker switch?
Asked by: Adam
Yes, The Neutrik SCCD-W Spring-Loaded Cover for Select Chassis Connectors is designed to work with Panel connectors like the Switchcraft D panel connectors. Compatibility XLR D Series female XLR D Series male 1/4" Jacks D Series speakON NL2M* and NL4M* powerCON 20 A Series NAC3MPA* and NAC3MPB* powerCON TRUE1 NAC3MPX opticalCON chassis connectors USB NAUSB-W* HDMI NAHDMI-W* D-SUB NADB* Firewire NA1394-6-W* etherCON D Series etherCON CAT6 chassis connectors etherCON CAT6A chassis connectors BNC D Series Phono (RCA) chassis connectors Note: Maximum allowed opening angle during installation is 100°. Maximum panel thickness is 0.06"/1.5mm in combination with ether CON NE8FD* receptacle.
Answered by: Chris H
Date published: 2022-08-03
  • y_2026, m_10, d_7, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_1171646, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_bhphotovideo
Whatever You Need, We've Got It