ACTi 1MP Indoor Cube Camera with 4.2mm Fixed Lens and Terminal Block

BH #ACE11A • MFR #E11A
Print
ACTi 1MP Indoor Cube Camera with 4.2mm Fixed Lens and Terminal Block
Key Features
  • 1/4" Progressive-Scan CMOS Sensor
  • 1MP Resolution @ 30 fps
  • 4.2mm Fixed Lens
  • 53.8° Horizontal Angle of View
The 1MP Cube Camera from ACTi features a 1/4" progressive-scan CMOS image sensor to deliver high-quality images at a resolution of up to 1280 x 720 at 30 fps. The 4.2mm fixed lens with an f/1.8 aperture provides a 53.8° horizontal field of view. Wide dynamic range, white balance, automatic gain control, and digital noise reduction features allow for clear images when there is ambient lighting or in low-light scenarios.
More Details
Special Order
Expected availability: 2-4 Weeks
No Store Display
Free Standard Shipping
Protect Your Gear
Add a protection plan from $22.00
Ask an Expert
800-606-6969

ACTi E11A Overview

The 1MP Cube Camera from ACTi features a 1/4" progressive-scan CMOS image sensor to deliver high-quality images at a resolution of up to 1280 x 720 at 30 fps. The 4.2mm fixed lens with an f/1.8 aperture provides a 53.8° horizontal field of view. Wide dynamic range, white balance, automatic gain control, and digital noise reduction features allow for clear images when there is ambient lighting or in low-light scenarios.

Motion Detection triggers an alarm when movement is detected in a designated portion of the video display, and 4 configurable privacy masking regions enable you to block certain portions of an image for security reasons. A built-in microphone and a 3.5mm jack offer two-way audio, enabling you to communicate with those you are monitoring. The camera also comes with a terminal block which allows you to attach an additional speaker and/or microphone.

Progressive scan CMOS sensor
Minimum illumination of 0.1 lux at f/1.8
Built-in 4.2mm lens allows you to record footage in 1MP resolution at 30 fps
Selectable H.264 and MJPEG compression formats with dual streaming
Two-way audio (speakers available separately)
Video motion detection
Powered by PoE Class 2
UPC: 888034004948

ACTi E11A Specs

Device Type
Cube Camera
Image Sensor
1/4" Progressive-scan CMOS
Day/Night
No
Minimum Illumination
Color: 0.1 lux at f/1.8 (30 IRE, 2400°K)
Mechanical IR Cut Filter
No
IR Sensitivity Range
No
Electronic Shutter
1/5 to 1/2000 sec (Manual / Auto mode)
Lens
Focal Length / Aperture
4.2mm fixed lens
Aperture
f/1.8
Iris
Fixed iris
Focus
Manual focus
Lens Mount
CS-Mount (interchangeable lens)
Horizontal Viewing Angle
53.8°
Video
Compression
H.264 HP and MJPEG
Maximum Frame Rate vs. Resolution
30 fps at 1280 x 720 (HD 720p)
30 fps at 640 x 480 (VGA)
Multi-Streaming
Simultaneous dual steams based on 2 configurations
Bit Rate
28 Kbps to 6 Mbps (per stream)
Bit Rate Mode
Constant, Variable
Image Enhancement
Basic WDR; White balance: automatic, hold, and manual; Brightness; Contrast; Automatic gain control; Digital noise reduction; Flicker-less
Privacy Mask Type
4 configurable regions
Text Overlay
User-defined text on video
Image Orientation
Image flip and mirror
Audio
Compression
8 kHz, Mono, PCM, 16-bit encoding; G.711
Audio In
Built-in Microphone
Audio Out
3.5mm jack
Network
Protocol
TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour
Ethernet Port
1, Ethernet (10/100 Base-T), RJ-45 connector
Security
IP address filtering; HTTPS encryption; Password-protected user levels; IEEE 802.1X network access control
Alarm
Alarm Triggers
Video motion detection (3 regions)
Alarm Response
Notify control center; Change camera settings; Command other devices; email notification with snapshots; upload video, snapshot to FTP server
General
Power Source
PoE Class 2 (IEEE802.3af)
Power Consumption
3.15 W
Mount Type
Wall, Ceiling
Operating Temperature
14 to 113°F (-10 to 45°C)
Operating Humidity
10 to 85% RH
Approvals
CE, FCC
Integration
Unified Solution
Fully compatible with ACTi software
ISV Integration
Software Development Kit (SDK) available; ONVIF compliant
Firmware Access Browser
Microsoft Internet Explorer 6.0 or newer
Dimensions
3.8 x 3.8 x 1.8" (96 x 96 x 45.07 mm)
Weight
0.45 lb (0.20 kg)
Packaging Info
Package Weight
0.98 lb
Box Dimensions (LxWxH)
8 x 5.4 x 3.5"

ACTi E11A Reviews

excellent security camera

By Charles
Rated 5 out of 5
Date: 2024-10-10

Have been using these cameras in multiple locations for many years. They are easy to use and extremely reliable and long-lasting. Have about 70 deployed and very rarely have to replace a camera.

See any errors on this page?

Is this unit compatible with the Acti NVR3 ...

Is this unit compatible with the Acti NVR3 system?
Asked by: Lee
Any ACTI cameras should be able to work with the ACTI software.
Answered by: Zev
Date published: 2019-02-05
  • y_2026, m_10, d_31, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_1175342, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_bhphotovideo
Whatever You Need, We've Got It