ACTi I98 2 MP Outdoor Speed Dome Network Camera with Night Vision

BH #ACI98 • MFR #I98
Print
ACTi I98 2 MP Outdoor Speed Dome Network Camera with Night Vision
No Longer Available
No Store Display
Ask an Expert
800-606-6969

ACTi I98 Overview

The ACTi I98 2 MP Outdoor Speed Dome Network Camera with Night Vision features a 33x zoom lens (f/4.5 to 148.5mm) and extreme WDR (Wide Dynamic Range) functionality. This 2MP camera uses a progressive scan CMOS image sensor and captures full HD images at a resolution of up to 1920 x 1080. It is weather-resistant (IP66 rated) and comes with terminal blocks that can be used when an external power adapter and a digital input or output device are required to be connected.

1/2.8" progressive scan CMOS image sensor
2MP with 1080p
Day/night with superior low light sensitivity and adaptive IR LED
33x zoom lens with f/4.5 to 148.5mm / f/1.6 to 5.0, DC iris, auto focus
Extreme WDR (145 dB)
60 fps at 1920 x 1080
Endless pan & tilt
IP66 weatherproof and IK10 vandal proof metal casing
Built-in analytics

ACTi I98 Specs

Device
Type
Outdoor PTZ Speed Dome Camera
Image Sensor
Progressive scan CMOS
Sensor Size
1/2.8"
Effective Pixels
1944 (H) x 1224 (V) (2.38 MP)
Horizontal Resolution
1800 TVL
Minimum Illumination
Color: 0.05 lux at f/1.6 (30 IRE, 2400K)
B&W: 0 lux at f/1.6 (30 IRE, 2400K)
Color to B/W Switch
ISP based switch, configurable
IR Sensitivity Range
700 to 1100 nm
IR LED
Adaptive IR LED x 8 (850 nm)
IR Working Distance
492' (150 m)
Electronic Shutter
1/5 to 1/2,000 sec (manual mode); 1/5 to 1/10,000 sec (auto mode)
S/N Ratio
56 dB
Lens
Type
Zoom
Focal Length
f/4.5 to 148.5 mm / f/1.6 to 5.0
Zoom Ratio
33x optical
Zoom Speed
2.7 seconds (tele to wide)
Iris
DC iris
Focus
Auto focus
Horizontal Viewing Angle
2.07 to 61.7°
PTZ
Speed
Preset Panning & Tilting: 0.1 to 280°/s
Panning Range
360° endless
Tilting Range
-20 to 200°
Control
Remote manual control
256 preset points
10 preset tours
Auto scan
Accuracy
Preset Panning & Tilting: 0.265°
Protocol
ACTi URL command, Sony VISCA, Pelco D, Pelco P
Video
Compression
H.264 (baseline / main / high profile), M-JPEG
Maximum Frame Rate vs. Resolution
60 fps at 1920 x 1080
60 fps at 1280 x 720
30 fps at 640 x 480
15 fps at 320 x 240
Multi-Streaming
Simultaneous triple streams based on video configurations
Bit Rate
128 kb/s to 12 Mb/s (per stream)
Mode: Constant, variable
Image Enhancement
Extreme WDR (145 dB)
White Balance: automatic, hold and manual
Brightness; Contrast; Sharpness; Automatic gain control; 2D- and 3D-digital noise reduction; Flickerless; Defogging; Advanced image stabilizer
Privacy Masking
32 configurable regions
Text Overlay
User-defined text on video
Image Orientation
Image flip and mirror
Analytics
Tamper, PTZ auto tracking, line crossing, enter area, missing object, unattended object
Audio
Audio
2-way (mic-in, line-in, line-out)
Compression
8 kHz, mono, PCM, 16-bit encoding; G.711
Audio In / Out
Cable with 3.5 mm phone jack
Network
Protocols
TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv4, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour
Ethernet Port
1, Ethernet (10/100Base-T), RJ45 connector
Security
IP address filtering; HTTPS encryption; Password protected user levels; Anonymous login; IEEE 802.1X network access control
Alarm
Alarm Triggers
Video motion detection (10 regions); External device through digital input
Alarm Response
Notify control center; Go to PTZ preset point or preset tour; Change camera settings; Command other devices; Email notification with snapshots; Save video or snapshot to local storage; Upload video, Snapshot to FTP server; Activate external device through digital output
Interface
Digital In/Out
4/2, Terminal block
Local Storage
microSDHC memory card slot (card not included)
Integration
Unified Solution
Fully compatible with ACTi software
ISV Integration
Software development kit (SDK) available
ONVIF-compliant
Firmware Access Browser
Microsoft Internet Explorer 8.0 or newer (full functionality)
Other browsers with QuickTime installed (partial functionality)
General
Power Source and Consumption
High PoE (IEEE802.3at) / 24 VAC
Approvals
CE (EN 55022 Class B, EN 55024), FCC (Part15 Subpart B Class B), IP66, IK10 (metal casing), NEMA 4X, UL (for bundled power adapter)
Mount Type
Pendant, Wall, Corner, Pole (sold separately)
Temperature
Starting: -40 to 122°F (-40 to 50°C) within 30 minutes
Operating: -40 to 122°F (-40 to 50°C)
Operating Humidity
10 to 85% RH
Dimensions
6.7 x 10.2" (17 x 26 cm)

ACTi I98 Reviews

See any errors on this page?
Whatever You Need, We've Got It