Learn from B&H Experts
From Manufacturer
This Vello Accessory Kit for the Sony Alpha a7R II Mirrorless Digital Camera from B&H is intended to enhance your use of that camera model while helping to ensure that its rear LCD is protected from damage. Included within this kit is a battery grip, a remote shutter release that can be used wirelessly, an LCD screen protector, and a cap keeper to prevent the loss of your lens cap.
The Vello BG-S3 Battery Grip is designed specifically for the Sony Alpha a7 II and a7R II cameras and holds one or two batteries. With two batteries in the grip, your shooting time is effectively doubled. The design of the battery grip offers a comfortable and secure way in which to hold your camera, especially in the vertical position.
The BG-S3 has a vertical-position shutter-release button, an alternate AF/MF/AEL button, three custom buttons, rear and main control dials, and an on/off switch. It is designed with an anti-slip rubber grip and a firm curvature to further improve handling. The grip screws into the camera's tripod mount, and it has another tripod mount on its bottom for attaching to a camera support. A metal mount allows you to attach a camera strap to the BG-S3 for convenient carrying.
Trigger your camera's shutter wirelessly with the included FreeWave Plus Wireless Remote Shutter Release from Vello, a lightweight remote control system that will help you avoid unwanted camera movement. This 2.4 GHz model is compatible with Sony Multi-Terminal cameras and will work wired, or wirelessly up to 320', depending on your own needs and setup. This makes it useful for photographing wildlife or for macro and long exposures where it is necessary to eliminate any chance of camera shake.
The FreeWave system also has access to 16 channels for triggering multiple receivers and has an internal antenna that will be protected from any accidental damage. Multiple features are available for shooting, such as a four-second delay as well as multi-exposure and long exposure modes. The device also has a dual function release, enabling focus on half press and triggering the shutter release on a full press. Additionally, it has LED indicators to confirm pre-focus and exposure when in wireless mode, while the receiver and transmitter each run on two AAA batteries.
The included Sony PCK-LM15 LCD Protective Cover is compatible with the Sony Cyber-shot RX1, RX1R, RX100, and RX100 II, as well as the Alpha a7 II and a7R II digital cameras. This highly-durable, semi-hard polycarbonate cover helps to reduce cracks, dust, and debris from reaching your camera's rear monitor. It also features an anti-fingerprint coating to help reduce excessive smudging.
The Cap Keeper Plus Lens Cap Holder from Sensei prevents the loss of lens caps. An adhesive-backed disc secures the lens cap to the elastic leash which wraps around a lens barrel. With the lens cap removed from the lens while shooting, it hangs out of the way but secure and within reach for easy retrieval. The Cap Keeper Plus is made with tough and extremely secure elastic.
The Vello BG-S3-2 Battery Grip is designed for use with the Sony Alpha a7 II, a7S II, and a7R II mirrorless cameras. The grip holds one or two NP-FW50 batteries which effectively doubles shooting time when both batteries are installed. The design of the grip provides a comfortable way to hold and shoot with the camera in the vertical position.
The BG-S3-2 features a vertical-position shutter-release button, an alternate AF/MF/AEL button, three custom buttons, rear and main control dials, and an on/off switch. It is designed with an anti-slip rubber grip and firm curvature to further improve handling. The grip screws into the camera's tripod mount, and it incorporates a tripod receiver mount on its bottom for attaching to a camera support, quick release plate, or bracket. A metal mount allows you to attach a camera strap or hand grip strap to the BG-S3 for convenient carrying.
The FreeWave Plus Remote Shutter Release from Vello is a wireless shutter release set that allows select Sony Multi-Terminal cameras to be triggered remotely to get shots from distances as far as 320' away. Multiple available shooting modes allow shooting in single, continuous, four-second delay, and bulb modes. The dual-function release enables pre-focusing by half-pressing the trigger button, then firing the shutter release by fully pressing. LED indicators confirm pre-focus and exposure status. The compact transmitter and remote receiver unit are each powered by two AAA batteries.
Cyber-shot: RX1R II, RX10 IV, RX10 III, RX10 II, RX10, RX100 VII, RX100 VI, DSC-RX100 VA, RX100 V, RX100 IV, RX100 III, RX100 II, HX50V, HX90V, HX400V, HX400, and HX300
The Cap Keeper Plus Lens Cap Holder from Sensei prevents the loss of lens caps. An adhesive-backed disc secures the lens cap to the elastic leash which wraps around the lens barrel. With the lens cap removed from the lens while shooting, it hangs out of the way but secure and within reach for easy retrieval. The Cap Keeper Plus is made with tough and extremely secure elastic.
Safeguard the LCD monitor of your Sony a 1, a7 II, a7 III, a9, RX10 or RX100 digital camera with this thin plastic Film Screen Protector from Vello. It keeps the camera's LCD screen free of dirt, scratches, sweat, and smears, while also reducing reflections for better visibility in bright light. The film easily adheres to the screen without trapping air bubbles, and if removed, won't leave a sticky residue behind. As a bonus, the supplied microfiber cloth allows you to clean the protector, leaving it perfectly clear and invisible.
- Sony Alpha:
- a 1
- a7R IVA
- a7R IIIA
- a7 II
- a7C
- a7R II
- a7S III
- a7S II
- a7 III
- a7R III
- a9
- Sony Cyber-shot:
- RX1
- RX1R
- RX1R II
- RX10
- RX10 II
- RX10 III
- RX10 IV
- RX100
- RX100 II
- RX100 III
- RX100 IV
- RX100 V
- RX100 VI