Video Chat with a Lighting Expert - Live

Nitecore MH1A v.2 Rechargeable LED Flashlight

BH #NIMH1A • MFR #MH1A
Print
Nitecore MH1A v.2 Rechargeable LED Flashlight
Key Features
  • 7 / 20 / 89 / 600 Lumen
  • CREE XM-L2 T6 LED
  • Battery Charges Inside the Housing
  • 1" Diameter Crenellated Bezel
Nitecore upgraded the MH1A v.2 Rechargeable LED Flashlight, replacing the emitter with an updated CREE XM-L2 T6 LED for a maximum output of 600 lumens. An intelligent two-stage pushbutton switch allows you to program your desired output, including a disorientating strobe or SOS emergency signal. To activate the 600-turbo mode, lightly tighten the head. This gives you access to your preferred operating output, while allowing you to quickly change to turbo mode.
More Details
No Longer Available
No Store Display
Ask an Expert
866-842-7675

Nitecore MH1A V2 Overview

Nitecore upgraded the MH1A v.2 Rechargeable LED Flashlight, replacing the emitter with an updated CREE XM-L2 T6 LED for a maximum output of 600 lumens. An intelligent two-stage pushbutton switch allows you to program your desired output, including a disorientating strobe or SOS emergency signal. To activate the 600-turbo mode, lightly tighten the head. This gives you access to your preferred operating output, while allowing you to quickly change to turbo mode.

Built for daily use, the aluminum housing has a scratch and corrosion-resistant hard-anodized finish, and a crenellated bezel can be used for self-defense or as a window breaker. The light is submersible to 6.6', and impact-resistant to 5'. Its circuitry allows it to run on disposable or rechargeable batteries. A micro-USB charging cable and a 14500 battery are included to charge the battery inside of the light.

Light Performance
  • 600-lumen Turbo mode
  • Three normal outputs from 7 to 89 lumens
  • Tight center cone of light with large dimmer peripheral ring
  • Deep, smooth aluminum reflector produces smooth beam without holes or hotspots
  • SOS signal automatically cycles through Morse code sequence
  • Strobe mode causes temporary blindness and disorientation
Switching
  • Two-stage tailcap switch
  • Partially press to cycle through the outputs, release to set desired output
  • Click to turn on programmed output
  • Tighten head to choose Turbo, then click to activate
  • Intelligent switch stores preferred brightness setting
Construction Details
  • Aluminum alloy housing
  • Type III hard-anodized finish
  • Corrosion and scratch-resistant
  • Anti-reflective coated, tempered lens
  • Textured diamond grip for sure handling
  • Submersible to 6.6', impact-resistant to 5'
  • Crenellated self-defense/window breaker bezel
  • U-shaped tailcap shroud helps prevent accidental activation
  • Compatible with lithium disposable, and NiMH, NiCd, and Li-Ion rechargeable batteries
  • Reverse polarity protection protects light if batteries are installed incorrectly
  • Batteries charge inside of the housing
  • Octagonal anti-roll collar
  • Detachable clip

Nitecore MH1A V2 Specs

Illumination Source
CREE XM-L2 T6
Output Range
Low: 7 lumen
Med: 20 lumen
High: 89 lumen
Turbo: 600 lumen
Runtime
Low: 23.0 hr
Med: 11.5 hr
High: 4.0 hr
Turbo: 0.75 hr
Battery
1 x 14500, rechargeable or disposable
Or 1 x AA, rechargeable or disposable
Construction
Aluminum alloy
Waterproofing
IPX8 rated, submersible to 6.6' / 2 m
Diameter
1" / 2.5 cm
Length
5" / 12.7 cm
Weight
2.6 oz / 75 g

Nitecore MH1A V2 Reviews

See any errors on this page?
Whatever You Need, We've Got It