Video Chat with a Pro Audio Expert - Live

BOSS VO-1 Vocoder Pedal

BH #BOVO1 • MFR #VO-1
Print
BOSS VO-1 Vocoder Pedal
Key Features
  • Digital Vocoder Pedal
  • For Guitar & Other Electric Instruments
  • Vintage and Advanced Synth Modes
  • Talk Box Mode
BOSS's VO-1 Vocoder Pedal combines a vocal synth and a talk box into a stompbox chassis. Using the onboard XLR microphone input, plug in a microphone, and vocally modulate your guitar's signal using one of the synth or talk box modes. This cool effect is not just for guitars. Plug in your bass or a synth and see what other cool tones you can achieve.
More Details
Special Order
Expected availability: 2-4 Weeks
No Store Display
This item cannot be canceled or returned.
Free Standard Shipping
Protect Your Gear
Add a protection plan from $42.99
Ask an Expert
800-606-6969

BOSS VO-1 Overview

From Manufacturer

BOSS's VO-1 Vocoder Pedal combines a vocal synth and a talk box into a stompbox chassis. Using the onboard XLR microphone input, plug in a microphone, and vocally modulate your guitar's signal using one of the synth or talk box modes. This cool effect is not just for guitars. Plug in your bass or a synth and see what other cool tones you can achieve.

Controls
Laid out in the familiar BOSS style, the VO-1 is intuitive to operate. The concentric Level and Blend controls adjust the output and balance between the wet and dry signals, respectively. Tone and Color controls offer general adjustment of your sound. The Mode knob selects what kind of synthesis the pedal applies to your guitar's signal
  • Vintage Mode: produces familiar synthesized voice sounds heard on pop and electronic music records throughout the years
  • Advanced Mode: utilizes new BOSS technology to translate speech and other vocalizations to your guitar's sound with more definition and clarity than the Vintage mode
  • Talk Box Mode: recreates the classic "talking guitar solo" without complex or finicky traditional mouth-tube rigs
  • Choir Mode: produces vocal textures just based on your guitar's input, no mic is required
XLR Microphone Input
Instead of relying on mouth tubes or other setups for vocal capture, the VO-1 uses a standard XLR microphone input. The sensitivity can be set at either low or high using the switch near the power input at the top of the pedal
Effects Loop
A second set of I/O is offered to add effects to the VO-1's signal path. Put some delay, distortion, or modulation effects in the loop for quick activation when the VO-1 is engaged. These effects will only be in your guitar's signal chain while the VO-1 is active
Classic BOSS Design
The VO-1 can run off of a single 9V battery or an optional external 9 VDC power supply. The electronics are encased in BOSS's iconic durable metal housing with a non-slip rubber base, and the battery compartment can be easily accessed by unscrewing the thumbscrew at the front of the pedal. This pedal utilizes a buffered bypass for silent switching and driving long cable runs, even while the pedal is disengaged.
UPC: 761294508664

BOSS VO-1 Specs

Inputs
2 x unbalanced 1/4" instrument TS
Nominal Input Level: -20 dBu
Input Impedance: 1 MOhm

1 x balanced XLR microphone
Nominal Input Level: -40 dBu (low mic sensitivity)
Input Impedance: 4 kOhms
Outputs
2 x unbalanced 1/4" instrument TS
Nominal Output Level: -20 dBu
Output Impedance: 1 kOhm
Recommended Load Impedance
10 kOhms or greater
Power Supply
9 VDC:
 Dry battery, 9 V type (alkaline 6LR61, carbon zinc 6F22)
 Optional AC Adapter (PSA series)
Current Draw
65 mA @ 9 VDC
Dimensions
2.9 x 5.1 x 2.4" / 73 x 129 x 59 mm
Weight
1 lb / 450 g
Packaging Info
Package Weight
1.25 lb
Box Dimensions (LxWxH)
5.9 x 3.75 x 2.7"

BOSS VO-1 Reviews

See any errors on this page?

question

Does/Will Boss/Roland have this circuit in any other device,e.g. a MFX or Guitar Synth, or is this the only way to get these sounds?
Asked by: Anonymous
The VO-1 is a newly released item. Currently there are no products with this circuitry. Roland does offer vocoder technology in several products.
Answered by: Jeff P.
Date published: 2018-08-26

Do I need a particular microphone for boss ...

Do I need a particular microphone for boss vocoder vo-1?
Asked by: Wayne
This will work with any dynaminc microphone with an XLR connector.
Answered by: James Cruz
Date published: 2021-04-18
  • y_2026, m_6, d_3, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_1217641, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_bhphotovideo
Whatever You Need, We've Got It