Video Chat with a Pro Audio Expert - Live

Quested V3110 MkII - 1000W Three-Way Active Mid-Field Studio Monitor (Single)

BH #QUV3110MKII • MFR #V3110 MKII
Print
Quested V3110 MkII - 1000W Three-Way Active Mid-Field Studio Monitor (Single)
No Longer Available
No Store Display
Ask an Expert
212-444-6615

Quested V3110 MKII Overview

The V3110 MkII Three-Way Mid-Field Studio Monitor is Quested's highest-rated active monitoring system. The combination of Class A/B and D amplifiers provides the V3110 monitor with 1000W of continuous RMS tri-amped power. This MkII version of this monitor features improved electronics and an uprated 10" driver unit.

The monitor utilizes a 3-way speaker design with low-frequency response down to 30 Hz from its custom-designed, linear-travel, long-throw 10" driver. The high-frequency tweeter and midrange speakers are designed with Quested's low-fatigue soft-dome technology, and are capable of adjusting for either horizontal or vertical positioning. A 24 dB/octave crossover slope delivers improved drive unit efficiency.

The speaker monitor features user-adjustable low-, mid-, and high-frequency filters. LEDs are provided to indicate power on/off, overload and thermal protection status. The V3110 Monitor was engineered to deliver a high power-density in a reference monitor cabinet with a minimal footprint and size.

Quested's highest-rated active monitoring system
3-way design with low frequency response down to 30 Hz from linear-travel, long-throw 10" driver
1000W RMS from combination of Class A/B and Class D amplification
Quested low-fatigue soft-dome high-frequency and mid-range technology
Adjustable HF / MF section to accommodate versatile horizontal or vertical positioning
Current-driven, floating drive stage Class A/B power for HF and MF drivers
Dedicated 700W RMS Class D amplifier for improved LF driver dynamics
24 dB/octave crossover slopes for improved drive unit efficiency
Very high-power density for cabinet footprint and size

Quested V3110 MKII Specs

LF Driver
1 x 10" (25.40 cm)
MF Driver
1 x 3" (7.62 cm)
HF Driver
1 x 1.125" (2.86 cm)
Maximum SPL
120 dB
Frequency Response
30 Hz to 20 kHz, +/- 2 dB
Input Voltage
115 VAC, 60 Hz
Input Connectors
Combo XLR/1/4"
Input Impedance
10 kOhm / Electronically balanced, RF filtered
Wiring
Pin 1: Ground / Sleeve
Pin 2: Hot / Tip
Pin 3: Cold / Ring
Sensitivity
Rear-mounted 10 position rotary switch
Calibrated in 2 dB steps
Low Frequency EQ
User, 4-position: -6 dB selector (for use with subwoofers) 0/+3/+4 dB
Mid Frequency EQ
User, 3-position selector: -1/0/+1 db
High Frequency EQ
User, 3-position selector: -1/0/+1 db
Low Frequency Output
700 watts RMS continuous
Mid Frequency Output
150 watts RMS continuous
High Frequency Output
150 watts RMS continuous
Total Harmonic Distortion (THD)
>0.03% at levels up to 1 dB below clipping
20 Hz to 20 kHz
Typical 0.005% at 20 watts/RMS @ 1 kHz
Hum & Noise
>-100 dB referred to clipping
LED Indicators
Power On: Front LED lit blue (flashes during warm-up cycle)
Overload: Front LED flashes red (Indicating 0.5 dB below signal clipping)
Thermal Protection: Front LED turns red, signal is muted (amp switches to standby)
Dimensions
14.96 x 23.62 x 14.17" (380 x 600 x 360 mm)
Weight
85.98 lb (39 kg)

Quested V3110 MKII Reviews

See any errors on this page?
Whatever You Need, We've Got It