The Essentials Suite from DJI is designed to provide you with the key accessories you are likely to require with your Inspire 1 quadcopter. The bundle features a Remote Controller so that you will have a second transmitter to control the camera with. It includes a TB47 flight battery along with a charging hub and heater to help extend battery life in the cold. A monitor hood is included to act as a sun shade for small tablets, such as the iPad mini. Finally, a complete set of four 1345T Quick Release Propellers is part of the suite.
For more information on the items in this bundle, please follow the links below.
The white DJI Transmitter for Inspire 1 Quadcopter is the handheld radio controller used to operate the aircraft as well as control the gimbal. You can even use two transmitters with one aircraft, thereby allowing one person to pilot so the second person can concentrate on operating the camera. It features a mini-HDMI (type C) port for connecting an FPV monitor or glasses, plus there is a USB type A port for connecting you mobile device when using the Inspire app.
The transmitter uses a 2.4 GHz band for the control signal, plus there is a 5.8 GHz radio allowing two controllers to be bound together for dual operator flying. In dual operator mode, the "master" transmitter is used by the pilot, while the "slave" transmitter is used by the camera operator to move the camera manually.
Note: The transmitter requires binding before it can be used with your quadcopter. Please refer to the manual for instructions.
DJI's Battery Heater for Inspire 1 helps ensure a cold battery won't limit your flying time. The heater powers from the Inspire 1 flight battery itself, warming it to about 86°F before automatically switching off. In most cases, taking 10 to 15 minutes to heat up - depending on environmental conditions.
Sequentially charge up to four batteries with the Battery Charging Hub for Inspire 1 Quadcopter. The hub works by connecting to the quadcopter's charger and power cord. It starts by topping off the battery with the greatest charge, then progresses to the next most charged battery, and so on. The entire process is monitored and each battery's status is shown using LED indicators.
Note: This is a sequential charger; i.e., it charges one battery at a time.
The Remote Controller Monitor Hood for Phantom 3 / Inspire 1 from DJI is designed to shield your mobile device's screen from the bright rays of the sun. Sized to fit small tablets such as the iPad mini, it connects to the Mobile Device Holder for the Inspire 1, Phantom 3 Professional, and Phantom 3 Advanced quadcopters. The shade collapses to conserve space when not in use.
The DJI 1345T Quick Release Props for Inspire 1 is a two-pack that features one clockwise (CW) and one counterclockwise (CCW) prop. It works with the Inspire 1 Pro and RAW as well as any earlier generation Inspire 1 that has the 1345T quick release adapter installed. Featuring quick release attachment, the props can be snapped on or off as needed without being unscrewed. As there are two rotational directions, please refer to the user guide to ensure that you replace a CW prop with a new CW prop and a CCW prop with a CCW prop.
Note: These rotors require the 1345T Quick Release Rotor Adapters (available separately), which must be installed before installing the props. These adapters are standard with the Inspire 1 Pro and RAW. They will not work with the 1345s quick release adapter.