Holiday Kickoff

Video Chat with a Pro Video Expert - Live

Wally Dolly Basic Dolly 9 ft Kit & Walkabout Hard Case Bundle

BH #WAWKITB • MFR #WALLYKITBUNDLE
Print
Wally Dolly Basic Dolly 9 ft Kit & Walkabout Hard Case Bundle
Key Features
  • Complete Portable 9 ft Track Solution
  • Supports Tripods with up to 80 lb Loads
  • Basic Dolly Kit with 9 ft Track & Bag
  • Waterproof Walkabout Hard Case
This bundle includes the Wally Dolly Basic Dolly Kit with 9 ft Track & Bag and the Walkabout Hard Case, providing a complete portable 9 ft track solution for tripods with up to 80 lb loads.
More Details
No Longer Available
No Store Display
Ask an Expert
800-606-6969
Kit Contains:

This bundle includes the Wally Dolly Basic Dolly Kit with 9 ft Track & Bag and the Walkabout Hard Case, providing a complete portable 9 ft track solution for tripods with up to 80 lb loads.

Conveniently carry everything to the set in the hard case, and then unpack and set up a 9 ft long linear track on flat surfaces. Attach your tripod to the included T-Section dolly as you would attach it to a ground spreader, and then smoothly slide it along the length of the track. The T-Section dolly rides along the track on polyurethane wheels that provide for a smooth tracking with no bouncing or squeaks. The track includes end stops that are especially useful when one person is operating both the dolly and camera. The T-Section dolly also features a mounting hole supporting the optional Wally Dolly Low Boy 100mm bowl adapter.

When you're done, the T-Section dolly easily breaks down into two pieces and the track into six pieces, and all these components neatly fit into the hard case, which is injection-molded and waterproof.

Wally Dolly Basic Dolly Kit with 9' Track & Bag

The Wally Dolly Basic Dolly Kit with 9' Track & Bag provides you with the components to create smooth dollies on hard surfaces with no bumps along the track joins and minimal track squeaks. The included T-section tripod carriage supports up to eighty pounds of equipment, allowing you to use cameras from compact camcorders up to full-sized ENG cameras. The T-shaped dolly mounts to your tripod in place of a ground spreader, securing the legs. This puts the center of the tripod close to one side of the tracks, so take that into consideration when choosing which side to put the T-section on.

The six polyurethane wheels ride on the included nine feet of track providing you a smooth ride with no pipe join bounces or squeaks. The dolly carriage breaks down into two easily assembled pieces for portability. It is pre-drilled to accept the optional Wally Dolly Low Boy 100mm Tripod Head Mount.

The nine feet of portable track comes as six track pieces featuring anodized aluminum construction that reduces squeaks and track noise when used with the Wally Dolly T-Section tripod carriage. The kit includes two track end stops, which can help prevent the dolly from rolling off the end of the track. The end stops are particularly useful when one person is operating both the dolly and camera, but are also appreciated by safety minded dolly grips. It includes two nine foot track pads, and a carry bag. Each 3' section of track features male and female acetal screw joins for quickly connecting sections of track together. The acetal ends are replaceable in the unlikely event they are damaged.

T Section Tripod Carriage
The T Section Tripod Carriage is designed to ride on the included 1.25" O.D. anodized aluminum track from Wally Dolly. This combination allows the carriage to smoothly transition across track joins and is tested to be extremely quiet.
The carriage features four cup like indents on each arm to capture the feet of your tripod.
The carriage breakdowns into two sections for portability.
The carriage incorporates a mounting hole for the optional Wally Dolly Low Boy, which is a 100mm bowl adapter.
Track
Anodized 6060 drawn aluminum tubes with a 1.25" outer diameter support the weight of the optional T Section tripod carriage and up to eighty pounds of optional tripod, camera, and accessories.
Each piece of track has a male and female replaceable acetal screw plug, allowing you to join together multiple pieces of track by screwing them into each other. This can result in a nearly limitless track run, with purchase of sufficient track pieces.
The track is designed to run through a standard Australian door opening (32") and lay on the included track pads.
Please note that this track is meant to run on fairly smooth surfaces, and track joins must be supported. You can use the included track pads on hard or uneven surfaces, and you may skip the track pads when dollying on soft surfaces such as carpet.
The included track ends provide safety and peace of mind, helping to prevent the dolly from running off the end of the track.
Wally Dolly Walkabout Hard Case

The Walkabout Hard Case from Wally Dolly is an injection molded mil-standard waterproof case and is molded from ultra-high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design. The hard case is custom designed and cut from high density foam inserts in an SKB military standard hard case. It allows for fast setup and pack-up. This unit is an alternative to putting the Wally Dolly soft case in a tripod tube. The Walkabout case will hold the Basic or the Complete Kit, 12' of track/pads and the Low Boy. The case is equipped with in-line skate style wheels, trigger release latches, and cushion grip handles.

In-line skate style wheels for easy transport
Trigger release latches can be retrofitted with TSA accepted key locking latches
Padlock holes include stainless steel padlock protector clips
Cushion grip handles on three sides
Waterproof and dust tight design
Molded-in hinge for added protection
Molded-in hinge for added protection
Ambient pressure equalization valve
Resistant to UV, solvents, corrosion, fungus
Resistant to impact damage
Machine cut high density foam insert
Kit Contains:

Wally Dolly Basic Dolly Kit with 9' Track & Bag

Dolly
Load Capacity
80 lb / 36.3 kg
Track Span
22.5" / 57 cm
Wheels
3 x Pair of polyurethane wheels
Track
Material of Construction
Track: Anodized 6060 drawn aluminum
Track Ends: Acetal
Track Pads: Cordura fabric
Diameter
O.D.: 1.25" / 31.75 mm
Length
Each Segment: 36" / 0.91 m
Width
Track Pad: 6" / 15.2 cm
Packaging Info
Package Weight
25.45 lb
Box Dimensions (LxWxH)
40.5 x 10.5 x 7.5"

Wally Dolly WALLYKITBUNDLE Reviews

See any errors on this page?
Whatever You Need, We've Got It