Video Chat with a Pro Audio Expert - Live

Shure MX412S/S Microflex Supercardioid Installation Microphone with 12" Gooseneck, Mute Switch, and LED

BH #SHMX412SS • MFR #MX412S/S
Print
Shure MX412S/S Microflex Supercardioid Installation Microphone with 12" Gooseneck, Mute Switch, and LED
Key Features
  • For Table, Desk, or Podium Installation
  • 12" Adjustable Gooseneck
  • Supercardioid Cuts Background & Feedback
  • Mute Switch & LED
The Shure MX412 Microflex Gooseneck microphone is an installation mic with a 12" adjustable goosneck for positioning. The mic is well suited for installation in a desk, conference table, or podium and includes mounting hardware.
More Details
In Stock
No Store Display
Free 2-Day Shipping
Protect Your Gear
Add a protection plan from $42.99
Ask an Expert
800-606-6969

Shure MX412 Overview

The Shure MX412 Microflex Gooseneck microphone is an installation mic with a 12" adjustable goosneck for positioning. The mic is well suited for installation in a desk, conference table, or podium and includes mounting hardware.

The mic offers an interchangeable condenser microphone cartridge designed for easy replacement and available in cardioid, supercardioid, and omnidirectional polar patterns. The interchangeable cartridges offer wide frequency response and accurate sound reproduction for a broad variety of applications in houses of worship, courtrooms, conference centers, and similar environments. This model features a supercardioid capsule that focuses the audio capture in a tight 115° pattern in front of the capsule, picking up less background sound and helping to reduce feedback problems.

Microflex microphones features high sensitivity and balanced, transformerless output for maximum immunity to electromagnetic hum and RF interference, even over long cable runs. This model features an attached preamp and also includes a silent mute switch with an LED indicator.

Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges provide the right polar pattern for every application
Attached preamp and balanced transformerless output for increased immunity to noise over long cable runs
Shockmount that provides over 20 dB isolation from surface vibration noise
Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
UPC: 042406052320

Shure MX412 Specs

Key Specs
Microphone Type
Gooseneck (Speech/Non-Instrument)
Polar Pattern
Supercardioid
Element Type
Condenser
Controls
Mic Mute
Frequency Response
50 Hz to 17 kHz
Maximum SPL
123 dB (1 kHz, 1% THD, 1-Kilohm Load)
Analog Output
1x XLR 3-Pin
Power Sources
Phantom Power
Microphone
Microphone Type
Gooseneck (Speech/Non-Instrument)
Polar Pattern
Supercardioid
Element Type
Condenser
Sound Field
Mono
Orientation
End Address
Controls
Mic Mute
Pad
No
Circuitry
Solid-State
Performance
Frequency Response
50 Hz to 17 kHz
Maximum SPL
123 dB (1 kHz, 1% THD, 1-Kilohm Load)
Sensitivity
-33.5 dB
Dynamic Range
96 dB (1-Kilohm Load)
Equivalent Noise Level
26.5 dB (A-Weighted)
Connectivity
Analog Output Connector
1x XLR 3-Pin
Power
Power Sources
Phantom Power
Operating Voltage
11 to 52 V (Phantom Power)
Physical
Dimensions
ø: 0.79 x L: 18.4" / ø: 20.07 x L: 468 mm (Microphone)
ø: 2.7H: 0.6" / ø: 68H: 14 mm (Base)
Packaging Info
Package Weight
1.25 lb
Box Dimensions (LxWxH)
24.8 x 5.4 x 2.9"

Shure MX412 Reviews

Nice Microphone - works good

By Denis
Rated 5 out of 5
Date: 2025-01-16

Works as described, we love the mount with rubber that eliminates surface vibrations.

Good quality

By Umid
Rated 5 out of 5
Date: 2023-02-03

I will recommend this mic to others

See any errors on this page?

question

How heavy is the base? Will it stay in place even if the podium is slightly tilted?
Asked by: Charles
This product is intended to be used on a flat surface. A few degrees of tilt may not affect stability much, however the typical podium tilt is much more than a few degrees. I recommend securing the base to the podium in order to ensure it stays in place regardless.
Answered by: Product Rep Shure Expert
Date published: 2024-10-20

Does the cable detach from the microphone base, ...

Does the cable detach from the microphone base, or is it permanently attached?
Asked by: Michael
The Shure MX412D/S, a 12-inch supercardioid desktop gooseneck microphone, comes with a permanently attached cable. This cable is approximately 3 m (10 ft) long and is terminated with a 3-pin male XLR connector for audio and includes separate conductors for logic control.
Answered by: Daniel O
Date published: 2025-08-08

question

I want to find a way to run Shure MX412's wirelessly using my existing Sennheiser G3 wireless belt pack transmitter combos. I tried to use Whirlwind 4x Phantom Power blocks but they introduced too much line noise to be useful. Any suggestion?
Asked by: Adam
I would consider getting the Sennheiser SKP 300 G3 transmitter which will provide 48 volts of phantom power for your MX412. This way you will not be introducing additional electronics to your audio chain, potentially causing line noise.
Answered by: James B.
Date published: 2018-08-27

question

how is it powered?
Asked by: Anonymous
The Shure MX412DS requires phantom power which is generally provide by the source through the XLR connection cable.
Answered by: Jeff P.
Date published: 2018-08-27

question

Does the MX412 DS have a mute switch and is it easily operable? If not which desktop model has the mute switch?
Asked by: Ryan
Jeff P is correct.
Answered by: Product Rep Shure Expert
Date published: 2018-08-27

Is the MX412DC a push to talk unit?

Is the MX412DC a push to talk unit?
Asked by: Order
Yes, the desk mount version of this gooseneck mic does havea push-to-talk button on the base.
Answered by: Steven M
Date published: 2022-02-16

Does it have an off/on or mute button?

Does it have an off/on or mute button?
Asked by: Marc
Yes - There is a "touchpad" switch on the microphone. By default the mic ships in an "always hot" state, and pressing the button momentarily "mutes". As outlined in the user manual, I have switched these to "touch-on" - "touch-off". Simple process in the bottom panel of the mic. I have 12 of these and it's a 2 minute process to convert each one by flipping a DIP switch on the board in the bottom stand.
Answered by: Anonymous
Date published: 2024-10-20

Will this mic preform outside well with a ...

Will this mic preform outside well with a windscreen?
Asked by: Bruce
Gooseneck mics generally come with foam windscreens, but for outdoor use , you may consider a furry windscreen to cut out wind. There are not furry models made specifically for this mic, but the Saramonic XM1-WS Furry Windscreen, BH #SAXM1WS would work for outdoor use.
Answered by: Steven M
Date published: 2022-01-21
  • y_2026, m_6, d_1, h_13CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_127156, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_bhphotovideo
Whatever You Need, We've Got It