Extend your DisplayPort-equipped computer up to 984' over Cat5, 5e, or 6 cabling using the CATx DisplayPort, USB, and Audio Computer Access Module from Adder, which supports resolutions up to 1920 x 1200 at 60 Hz. This module also features a USB-A port, which provides 5V/500mA of power and USB HID devices at 1 Mb/s, and a 3.5mm audio jack for CD quality audio.
This module connects to your system's DisplayPort video connector, plus USB-A and audio ports, then connects via CAT 5, 5e or 6 cabling to the AdderView CATx KVM switches and/or Adder extender receivers (AdderLink X100 or X200), each of which can be located up to 984' from the module. Your video display, keyboard, mouse, and speakers are then all linked to the remote device.
Resolutions and Cable Lengths
The maximum achievable resolutions are 1920 x 1200 at 60 Hz for a distance of up to 656' and 1280 x 1024 at a distance of up to 984'.
Power
The CATx DisplayPort CAM uses the USB port to derive its power from the host computer, dispensing with the need for a separate power supply and thus simplifying installation. Therefore, the USB cable must always be connected to a USB port on the computer that is capable of providing up to 500mA. Power is not taken from the DisplayPort connector.
EDID Display Information
The module will check during power up the EDID information available from the KVM switch or extender that is connected to the monitor and passes this back to the computer.
USB
The CAM supports low speed (1 Mb/s) HID USB devices only.
Audio
2-channel, CD-quality audio is supported via a 3.5mm jack plug. Audio is not available through the DisplayPort connector.
EAN: 5055109100682