The F300-6 Frame Gluing System from Logan Graphics contains the F61 frame glue and the F62 frame glue accelerator, which are used together to bond frame moldings when creating a custom frame.
Apply the glue to one side of the molding and spray the accelerator, which speeds up the bonding process, onto the other and hold together for ten seconds, using the aluminum frame guide to help align the moldings during this process. Logan Graphics also recommends using v-nails for an even stronger hold.
The F61 Frame Glue from Logan Graphics is used to join two pieces of frame molding to create a frame. Applying a small amount of glue onto the inside each molding and holding the joint together will create a bond; allowing the molding to cure overnight before hanging will result in an even stronger bond. F62 frame glue accelerator can be used to speed up the gluing process. Logan Graphics also recommends using v-nails for added strength.
The F62 Frame Glue Accelerator from Logan Graphics is used in conjunction with the F61 Frame Glue, which helps the bonding action of the glue to adhere faster, and to join two pieces of frame molding together to create a custom frame. Once the frame glue is applied on one side of the molding, the accelerator is sprayed onto the other end of the second molding, and held together for ten seconds to create the bond.

