Video Chat with a Pro Video Expert - Live

Acebil I-605DX Tripod System with SZ300 Universal Zoom Controller

BH #ACI605PSZ300 • MFR #I-605PK/SZ300
Print
Acebil I-605DX Tripod System with SZ300 Universal Zoom Controller
In Stock
No Store Display
Free 2-Day Shipping
Protect Your Gear
Add a protection plan from $32.99
Ask an Expert
800-606-6969

Acebil i-605 Overview

The I-605DX Tripod System with SZ300 Universal Zoom Controller from Acebil includes a two-stage aluminum tripod, H605 fluid head, S-9 carry case, and SZ300 zoom controller. Capable of supporting up to 8.8 lb, the I-605DX provides an optimum entry-level solution for mounting handycams and camcorders. A leveling base with 65mm ball is provided, allowing for +90/-60° tilt angles. In addition, the camera mounting is provided via a quick release slide plate.

The SZ-300 zoom controller is designed to work with the Canon protocols, Sony/Canon LANC, JVC HDV cameras, and Panasonic MiniDV or HDV cameras. It features a built-in auto switch and can be used as a 3-in-1 remote.

i-605DX Tripod
65mm ball
Height adjustment range of 30.3 to 59"
Maximum payload of 8.8 lb
SZ-300 Controller
Record start/stop
Zoom lever can be used for variable zoom speed

Acebil i-605 Specs

Key Specs
Camera Mounting
1/4"-20 Screw with Locating Pin (Quick Release Plate)
Head Type
Fluid Head
Drag Control
No
Primary Material
Not Specified by Manufacturer
Load Capacity
8.8 lb / 4 kg
Maximum Working Height
59" / 150 cm
Minimum Working Height
30.3" / 77 cm
Closed Length
Not Specified by Manufacturer
Weight
7.2 lb / 3.3 kg
Head
Camera Mounting
1/4"-20 Screw with Locating Pin (Quick Release Plate)
Head Type
Fluid Head
Base Mount
65 mm Half Ball
Counter Balance
Fixed
Pan & Tilt
Drag Control
No
Vertical Tilt
+90° to -60°
Lateral Tilt
No
Legs
Primary Material
Not Specified by Manufacturer
Leg Sections
3
General
Load Capacity
8.8 lb / 4 kg
Maximum Working Height
59" / 150 cm
Center Column
No
Minimum Working Height
30.3" / 77 cm
Closed Length
Not Specified by Manufacturer
Bubble Level
No
Detachable Monopod
No
Spreader Support
Mid-Level (Integrated)
Weight
7.2 lb / 3.3 kg
Packaging Info
Package Weight
12.5 lb
Box Dimensions (LxWxH)
36.25 x 8 x 7.5"

Acebil i-605 Reviews

What you pay is what you get, but it's great!

By Makoto
Rated 4 out of 5
Date: 2016-12-08

It's a great tripod to start up with. Steady and relatively smooth pan/tilt (fixed drag mode, you cannot adjust the drag, and it's not buttery). You can definitely get the job done. The downside is, it's hard to make minor adjustments (like for dolly/slider time lapse, etc) and the more you extent the legs it becomes unstable. It's a great product with the price you can it get for, especially if your budget is tight. But definitely not a long-term investment. If you are looking to go professional, I would suggest looking for a more high-end tripod. Not suitable for perfectionist amateurs either. My review is based off from a cinematography stand point.

Great Video Tripod on a Budget

By Phil
Rated 4 out of 5
Date: 2013-10-16

I use this product mainly for wedding and event cinematography. The tripod is very stable and provides smooth motion for panning and tilting. The head is also very easy to level by adjusting the ball mount. My favorite feature is the zoom control handle that I have used with my Canon XA-10 Camcorder. The handle puts the most used controls on my camcorder right where I need them, and I can swap the handle out to use with my Acebil Monopod as well. The one thing that I am slightly concerned about is the cable that is used to connect the zoom control handle to the camera. It is a pull-out design that locks as you pull it out so that it doesn't retract back into the handle. The cable seems rather flimsy and I'm not sure how long that will last, but for the price the entire package is an excellent purchase for anyone looking for a low-cost video tripod.

See any errors on this page?

question

What is the height of this tripod?
Asked by: Anonymous
The tripod has a max height of 59 inches tall.
Answered by: Yos O.
Date published: 2018-08-28

Is this head compatible with manfrotto 501 ...

Is this head compatible with manfrotto 501 quick-release plates?
Asked by: Cade
Unfortunately, the Acebil I-605DX is not compatible with the Manfrotto 501pl plate.
Answered by: Richard
Date published: 2021-12-12
  • y_2026, m_7, d_23, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_1351326, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_bhphotovideo
Whatever You Need, We've Got It