Ask Our Experts800-606-6969
Hello, Log InAccount & Orders
Trijicon 4x32 ACOG Center Illuminated Riflescope and 3.25 MOA Red Dot Type 2 RMR Sight Kit (CI .223 Amber Crosshair Reticle, Matte Black)
Key Features
- CI .223 Amber Crosshair Reticle
- 3.25 MOA Red Dot RMR Reticle
- Center Illuminated
- 1/2 MOA Impact Point Correction
Subdue your enemy with the help of Trijicon's 4x32 ACOG Center Illuminated Riflescope and 3.25 MOA Red Dot Type 2 RMR Sight Kit. The kit includes a battle-ready Advanced Combat Optical Gunsight (ACOG) and a secondary Ruggedized Miniature Reflex Sight (RMR). Designed to withstand a heavy beating, the ACOG features a waterproof and shock-resistant construction with a housing that is forged from a single piece of 7075-T6 aluminum alloy and coated with Type III hard anodizing finish. The optics perform with zero distortions and have multiple anti-reflection coatings to remove glare and to improve transmission. To compensate for wind and ballistic bullet drop, you have windage and elevation adjustments with 1/2 MOA clicks. Also noteworthy is the CI tritium illuminated .223 Amber Crosshair Reticle defined by two horizontal posts and a thin crosshair with markings for ballistic and wind compensation.
More DetailsIn Stock
Protect Your Gear
Add a protection plan from $79.99
See Options
Configuration
See any errors on this page?
On Trijicon's web page the TA31RCO-M150CP has ...
On Trijicon's web page the TA31RCO-M150CP has tabs for mounting a RMR in your picture here it does not. So does it have them?
The pictures you see on the B&H website are cut and copied from the manufacture website.
It wiuld be the same product as seen ton the Trijicon website.
Date published: 2023-05-23
Is the RMR a type 2, or type 1?
Is the RMR a type 2, or type 1?
It is a type 2.
Date published: 2020-10-02
Does this model have bosses?
Does this model have bosses?
You can mount an RMR on your scope with BH #TRRM35. That is the part number you will find the RMR mount on the B&H website.
Date published: 2020-02-27
question
Does this product come with lens covers just like the photo shows?
Yes, the lens covers are included.
Date published: 2018-08-27
Is the ilumination repairable?
Is the ilumination repairable?
The tritium can be replaced by Trijicon by sending the optic in to them directly.
Date published: 2021-12-31
Would I be able to remove the RMR and mount it on ...
Would I be able to remove the RMR and mount it on my pistol?
I can only verify that the Trijicon 4x32 ACOG Dual Illuminated Riflescope and 3.25 MOA Red Dot Type 2 RMR Sight Kit (DI .223 Red Chevron Reticle, Matte Black)
BH #TR4X32RC223 • MFR #TA31-D-100549 Mounts on ACOG and comes with Trijicon ACOG Picatinny Rail Adapter
Date published: 2022-05-22
question
How is this powered?
By Fiber Optics.
Date published: 2025-05-22
question
Specs say this RCO is designed for 14.5 inch barrel. Will it be ok on a 16 inch barrel? Trajectory of a 5.56 is pretty comparable regardless of barrel length I thought.
The problem is one of velocity, not so much barrel length. Generally speaking the longer the barrel the higher the velocity. The difference in barrel length is 1 1/2 inch but remember that rarely does manufacturer specs match up with the actual velocity, too the outside temperature will affect the actual velocity. Unless you are a purist the difference is not worth worrying about. Also, the 223/5.56 is a very flat shooting cartridge, depending on the load and I am assuming a standard 55 grain load. With the right zero the bullet will never be more than 3 high or 3 low out to over 300 yards. If you hand load it would be a very easy matter to adjust the velocity if you felt the need to do so. Regardless of what ammo you shoot there will be variances in velocity unless you have match grade ammo. You can zero this scope wherever you want with the added benefit that it has range finding ability. By the way, the horizontal line is NOT for windage . . . . . the Chevron is used for that. The horizontal line is in Mil's . . . . . read the manual.
Date published: 2018-08-27