Video Chat with a Pro Audio Expert - Live

Electro-Harmonix Slammi Plus Polyphonic Pitch Shifter/Harmony Pedal

BH #ELSLAMMIPLUS • MFR #SLAMMI PLUS
Print
Electro-Harmonix Slammi Plus Polyphonic Pitch Shifter/Harmony Pedal
Discontinued
No Store Display
Ask an Expert
800-606-6969

Electro-Harmonix Slammi Plus Overview

The Slammi Plus Polyphonic Pitch Shifter/Harmony Pedal from Electro-Harmonix transposes your pitch in two different directions over a +/-3 octave range (transpose up, down, or both) simultaneously. The 11-position Shift switch selects the maximum transposition starting with D (Detune) which is a shift of 17 cents that creates a chorus or doubling effect.

The Dual setting outputs two pitch-shifted signals. The first follows the Shift knob as if in UP mode. The second transposed signal depends on whether the Slammi Plus is set to Pitch or X-Fade. In Pitch mode, the secondary shifted signal bends at the same rate as the primary signal. When in X-Fade mode, the secondary signal is set by the Pitch Mix knob and does not bend. The interval choices are in half-step increments up to +/-1 octave. The volume of the secondary signal decreases by sweeping the pedal from heel to toe.

Glitch-free transposing over a +/-3 octave range
Three Shift Modes: Up, Down, and Dual
Dual Pitch Shifting mode enables Slammi Plus to generate two separate pitch shift intervals simultaneously
X-Fade mode keeps the pitch-shift interval fixed (does not bend) while the foot pedal cross-fades between your dry note and pitch-shifted note or cross-fades from one pitch-shifted interval to another
Fully polyphonic
Added flexibility in setting the heel position's pitch-shifted interval
Blend control lets you fine tune the wet/dry mix
Runs on a 9V battery (included) or most third-party power supplies including the EHX 9.6 VDC/200mA PSU (sold separately)
Traditional rack and pinion style operating mechanism
UPC: 683274011998

Electro-Harmonix Slammi Plus Specs

Input Impedance
2 MOhms
Output Impedance
Nominal: 750 Ohms
Input/Output
1/4" input jack
1/4" output jack
Power Source
9 V battery or 9 VDC adapter (center negative)
Current Draw
24 mA
Compliance
FCC
Dimensions
Not specified by the manufacturer
Weight
Not specified by the manufacturer
Packaging Info
Package Weight
1.93 lb
Box Dimensions (LxWxH)
11.5 x 4.8 x 3.3"

Electro-Harmonix Slammi Plus Reviews

See any errors on this page?
Whatever You Need, We've Got It