From Manufacturer
The Double Varsa V2 Daylight Kit with Gold Mount Battery Plates from Nila is a wise choice for location or the studio. The kit includes 2 IP65-rated, weatherproof Daylight Varsa V2 LED fixtures, each with a Gold mount battery plate, 6 holographic lenses, CTO gel set with pouch, and a set of 4-way barndoors. A kit case is included to store and transport it all.
The Varsa V2 Daylight LED Fixture Kit from Nila provides you with a daylight balanced LED light. yoke and power cable. The Varsa light draws 75W power and is dimmable from 100 to 0%. It is flicker-free up to 5000 fps at any dimming setting. In fact, the Varsa V2 is flicker-free at 100% at any frame rate. The Varsa light fixture is DMX controllable (control panel not included). An added feature of the V2 is its IP65 weatherproof rating making the light more than up to the challenge of wet climates.
The Varsa V2 is power factor corrected, which means that it incorporates technology to make it more power efficient, ensuring that its actual power usage is closer to its rated power draw than if it was not power factor corrected. The light is ready for worldwide use thanks to its 100-240 VAC power supply.
The 40 Degree Medium Holographic Lens for Varsa LED Light from Nila changes the light's beam spread.
The 20 Degree Spot Holographic Lens for Varsa LED Light from Nila changes the light's beam spread.
The 10 Degree Narrow Spot Holographic Lens for Varsa LED Light from Nila changes the light's beam spread.
The 10 x 60 Degree Elliptical Holographic Lens for Varsa LED Light from Nila changes the light's beam spread.
The 60 Degree Wide Holographic Lens for Varsa LED Light from Nila changes the light's beam spread.
The 80 Degree Flood Holographic Lens for Varsa LED Light from Nila changes the light's beam spread.
This Varsa CTO Set from Nila includes a 1/8, a 1/4, a 1/2, and a Full Color Temperature Orange filter. These filters are compatible with the Nila Varsa Light Fixture, which has an integrated faceplate that can accommodate one filter at a time. Each of the filters in the Varsa CTO Set can be used to conveniently lower the color temperature output of a Varsa light fixture installed with a daylight color temperature bulb to a tungsten color temperature instead. Depending on the color temperature of the daylight bulb being used, a Varsa light fixture's faceplate allows the filters within this CTO set to be exchanged in order to obtain the desired tungsten color temperature output.
These filters have a Full, 1/2, 1/4, or 1/8 grade. Each grade corresponds to that of a +167, +81, +42, or +20 mired shift, and reduces the output of a light source by 1.1, 0.5, 0.3, or 0.1 stops respectively.
- Compatible with the Nila Varsa Light Fixture
- Converts the output of a Varsa light fixture installed with a daylight color temperature bulb to a tungsten color temperature
- Full, 1/2, 1/4, or 1/8 grades correspond to a +167, +81, +42, or +20 mired shift, a 47, 73, 81, or 92% light transmission rate, and reduces the output of a light source by 1.1, 0.5, 0.3, or 0.1 stops respectively
- Constructed from polycarbonate for durability
The 4-leaf Varsa Barndoor Set from Nila fits on the front of the fixture, allowing you to control and contour its light output while reducing spill light.
The Battery Adapter Plate from Nila allows you to power the Varsa or Zaila LED lights using a Gold Mount battery.