Ubiquiti Outdoor Ethernet Surge Protector (10kA)

BH #UBETHSPG2 • MFR #ETH-SP-G2
Print
Ubiquiti Outdoor Ethernet Surge Protector (10kA)
Key Features
  • 2 x RJ45 PoE Ports
  • Up to 2.5 Gb/s Data Throughput
  • 10kA Surge Discharge
  • IPX5 Rated
Add protection for your outdoor power-over-Ethernet device installations with this Outdoor Ethernet Surge Protector from Ubiquiti. Supporting a 2.5 Gb/s data throughput with its dual RJ45 ports, this single device passive PoE surge protector is designed with a 10kA surge discharge. IPX5 rated weather resistance ensures reliable operation while the surge protector is mounted on a wall or pole.
More Details
Top Seller
In Stock
No Store Display
Protect Your Gear
Add a protection plan from $3.99
Protection
Ask an Expert
800-606-6969

Ubiquiti ETH-SP-G2 Overview

Add protection for your outdoor power-over-Ethernet device installations with this Outdoor Ethernet Surge Protector from Ubiquiti. Supporting a 2.5 Gb/s data throughput with its dual RJ45 ports, this single device passive PoE surge protector is designed with a 10kA surge discharge. IPX5 rated weather resistance ensures reliable operation while the surge protector is mounted on a wall or pole.

UPC: 817882023900

Ubiquiti ETH-SP-G2 Specs

General
Network Interface
2 x RJ45 2.5 Gb Ethernet PoE
Protection
DC Spark-Over Voltage: 90 V at 100 V/s
Max. Impulse Spark-Over Voltage Protection: 700 V at 1 kV/µs
Discharge Current: 10 kA
Insulation: 1 G ohm at 50 V (Max. Resistance)
Max. Capacitance: 1.0 pF at 1 MHz
Physical
Mounting
1x Wall; Pole
Color
White
Material of Construction
Polycarbonate
Operating Conditions
-22 to 149°F / -30 to 65°C at 10 to 90% Humidity
Dimensions
3.6 x 2.4 x 1.3" / 91 x 61 x 32.5 mm
Weight
3.4 oz / 95 g
Packaging Info
Package Weight
0.235 lb
Box Dimensions (LxWxH)
3.7 x 2.45 x 1.3"

Ubiquiti ETH-SP-G2 Reviews

B&H always comes through

By Steve
Rated 5 out of 5
Date: 2026-03-05

No matter what you buy from these guys, they stand behind their products. Shipping is always extremely fast in my opinion.

Works for what’s it designed

By Isaac
Rated 5 out of 5
Date: 2025-06-04

Works for what’s it designed. Have an outdoor AP and wanted to make sure I protect my equipment. With the amount of lightning in Georgia lately it was a no brainer. Ended needing two of them. One for right near home and one closer to AP.

See any errors on this page?

What is the Equipment Protection Policy on this?

What is the Equipment Protection Policy on this?
Asked by: Bart
Limited Warranty UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation. UBIQUITI NETWORKS’ sole and exclusive obligation and liability under the foregoing warranty shall be for UBIQUITI NETWORKS, at its discretion, to repair or replace any Product that fails to conform to the above warranty during the above warranty period. The expense of removal and reinstallation of any Product is not included in this warranty. The warranty period of any repaired or replaced Product shall not extend beyond its original term. Warranty Conditions The above warranty does not apply if the Product: (I) has been modified and/or altered, or an addition made thereto, except by Ubiquiti Networks, or Ubiquiti Networks’ authorized representatives, or as approved by Ubiquiti Networks in writing; (II) has been painted, rebranded or physically modified in any way; (III) has been damaged due to errors or defects in cabling; (IV) has been subjected to misuse, abuse, negligence, abnormal physical, electromagnetic or electrical stress, including lightning strikes, or accident; (V) has been damaged or impaired as a result of using third party firmware; (VI) has no original Ubiquiti MAC label, or is missing any other original Ubiquiti label(s); or (VII) has not been received by Ubiquiti within 30 days of issuance of the RMA. In addition, the above warranty shall apply only if: the product has been properly installed and used at all times in accordance, and in all material respects, with the applicable Product documentation; all Ethernet cabling runs use CAT5 (or above), and for outdoor installations, shielded Ethernet cabling is used, and for indoor installations, indoor cabling requirements are followed.
Answered by: Daniel
Date published: 2020-08-03
  • y_2026, m_6, d_6, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_1408366, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_bhphotovideo
Whatever You Need, We've Got It