The Letus Helix Pro Magnesium Gimbal from Letus35 is designed from the ground up specifically for cinematography. It is optically centered to minimize sensor movement and avoid the robotic look in footage found with other gimbals. Your hands are at the lens level, not a foot higher like other gimbals, for eye-level filming, for less shooting fatigue. It's a lot easier to balance each axis individually than making all 3 axes balance at the same time. Lens change is easier with simple adjustment of a single axis due to the optical center design. The flat-bottom design lets you put the gimbal down between shots without needing a stand. Absolute encoders prevent motors from losing their position during a bump. Improve stabilization precision. Adjust Dutch angle within a second by holding at the desired angle. This is the first handheld gimbal on the market with power management.
Ask Our Experts800-606-6969
Hello, Log InAccount & Orders
Video Chat with a Pro Video Expert - Live
Key Features
- Designed Specifically for Cinematography
- Optically Centered; Quick Balancing
- Intuitive Tilt Handle; Power Management
- Flat-Bottom Design; Absolute Encoders
The Letus Helix Pro Magnesium Gimbal from Letus35 is designed from the ground up specifically for cinematography. It is optically centered to minimize sensor movement and avoid the robotic look in footage found with other gimbals. Your hands are at the lens level, not a foot higher like other gimbals, for eye-level filming, for less shooting fatigue. It's a lot easier to balance each axis individually than making all 3 axes balance at the same time. Lens change is easier with simple adjustment of a single axis due to the optical center design. The flat-bottom design lets you put the gimbal down between shots without needing a stand. Absolute encoders prevent motors from losing their position during a bump. Improve stabilization precision. Adjust Dutch angle within a second by holding at the desired angle. This is the first handheld gimbal on the market with power management.
More DetailsSpecial Order
Expected availability: 2-4 Weeks
This item cannot be canceled or returned.
Protect Your Gear
Add a protection plan from $529.99
See Options
Business Financing Options
Letus35 Helix Pro Overview
Letus35 Helix Pro Specs
Key Specs
| Gimbal Design | |
| Number of Axes | |
| Camera Control | |
| Mobile App Compatible | |
| Display Type |
| Gimbal Design |
Gimbal
| Load Capacity | |
| Number of Axes | |
| Joystick Controller |
Compatibility
| Camera Control | |
| Camera Compatibility | |
| Camera Mounting Screw |
Connectivity
| Inputs/Outputs | |
| Wireless | |
| Mobile App Compatible |
Battery
| Battery Type |
Power
| Operating Voltage |
General
| Display Type | |
| Environmental Resistance | |
| Materials | |
| Accessory Mounting | |
| Dimensions | |
| Weight |
Letus35 Helix Pro Reviews
See any errors on this page?
This looks like a two axis stabilizer so want to ...
This looks like a two axis stabilizer so want to confirm if two or three and if three can i make it a two axis only to add onto steadicam to keep pan control on steadicam only and this to serve like a trinity style head with roll and tilt stabilized and if so can i control tilt somehow like trinity head? Also would a light derigged c300 mark iii with L series glass such as a 14mm2.8L be ok on this weight wise?
it is a 3 axis system with the helix 4th Axis bracket. According to the manufacturer
"The Helix 4th Axis Bracket from Letus allows you to use your Helix camera stabilizer on 3rd party camera supports such as tripods, vest/arm type supports and optional Easy Rigs when using optional accessories. The 4th axis bracket features a built-in main bearing on the cross bar for free rotation and two risers that accept bearings that allow for tilt rotation.
You mount the included bearings and o-rings onto your Helix stabilizer and then fit your Helix into the 4th axis's risers, securing them with the four included M5 set screws. At this point, you can mount the entire rig onto a Steadicam-type rig, using an optional spacer, onto a tripod with the optional spacer and Devitte mount, or to an Easy Rig (not included) using an optional top handle. The crossbar incorporates 6x threaded 1/4"-20 accessory mounting points."
so it can be mounted on a steadicam in the manner you have described.
the Helix Pro will support a C300MKiii or a C500MKii
Date published: 2020-08-13