Video Chat with a Pro Audio Expert - Live

Pyle Home PCM60A 100W Power Amplifier with 25V/70V Output

BH #PYPCM60A • MFR #PCM60A
Print
Pyle Home PCM60A 100W Power Amplifier with 25V/70V Output
Key Features
  • 100W Output
  • 3 x Balanced Mic Inputs
  • 3 x Stereo RCA Aux Inputs
  • Level Controls and 2-Band EQ
Take control of your paging system with the Pyle Home PCM60A, a 100W power amplifier that easily integrates into low-impedance or constant-voltage speaker setups. With three balanced microphone inputs, three stereo RCA aux inputs, and selectable Mic 1 priority, the PCM60A is ideal for mixing multiple sources and delivering announcements that can be clearly heard over background music.

The front panel features per-input level controls and overall 2-band EQ for simple optimization of your mix. Enhance the tone of your music sources via the Contour Control, which applies a gain boost at 100 Hz and 10 kHz to all three aux inputs. Patch the stereo RCA aux output to a tape deck or an audio interface for convenient recording of your mix.

The 100W output feeds the rear-panel speaker terminals, which include connections for 4-, 8-, and 16-Ohm speakers as well as 25V and 70V speakers. The rear panel also presents level-adjustable paging outputs, and speaker/headphone monitor outputs for music-on-hold applications. Connect the power amp to a standard IEC wall outlet with the supplied power cable, and utilize the PCM60A's unswitched AC outlet to power additional gear.
More Details
In Stock
No Store Display
Shipping Charges Apply
Protect Your Gear
Add a protection plan from $11.99
Ask an Expert
800-606-6969

Pyle Home PCM60A Overview

Take control of your paging system with the Pyle Home PCM60A, a 100W power amplifier that easily integrates into low-impedance or constant-voltage speaker setups. With three balanced microphone inputs, three stereo RCA aux inputs, and selectable Mic 1 priority, the PCM60A is ideal for mixing multiple sources and delivering announcements that can be clearly heard over background music.

The front panel features per-input level controls and overall 2-band EQ for simple optimization of your mix. Enhance the tone of your music sources via the Contour Control, which applies a gain boost at 100 Hz and 10 kHz to all three aux inputs. Patch the stereo RCA aux output to a tape deck or an audio interface for convenient recording of your mix.

The 100W output feeds the rear-panel speaker terminals, which include connections for 4-, 8-, and 16-Ohm speakers as well as 25V and 70V speakers. The rear panel also presents level-adjustable paging outputs, and speaker/headphone monitor outputs for music-on-hold applications. Connect the power amp to a standard IEC wall outlet with the supplied power cable, and utilize the PCM60A's unswitched AC outlet to power additional gear.

Front-panel controls for mic/aux levels and 2-band EQ
Three balanced 3-pole mic input terminals and one 3-pin XLR mic input jack
Three stereo RCA aux inputs
Switchable Contour Control mode boosts 100 Hz by 8 dB and 10 kHz by 4 dB
Switchable Mic 1 priority attenuates Mic 2, Mic 3, and all Aux inputs -40 dB when signal at the first mic input is received
Per-input mic/aux source selection
Internally adjustable Mic 1 attenuation level (0 to -40 dB)
Tel/paging output terminals with adjustable level
Multiple speaker output terminals accommodate 4-, 8-, or 16-Ohm speakers as well as 25V or 70V systems
Dual monitor outputs (600-Ohm / 1V for headphones, 8-Ohm / 1W for loudspeaker) with adjustable level for music-on-hold monitoring
Stereo RCA aux output for patching the mix to a stereo audio recorder
Replaceable fuse
Unswitched 500W AC outlet
Power on/off switch and LED indicator
Selectable voltage standard
UPC: 068888896887

Pyle Home PCM60A Specs

Form Factor/Type
Tabletop
Number of Amplifier Channels
1
Load Impedance/Voltage Support
4 / 8 / 16 Ohms
25 / 70 V
Power Rating per Channel
1x 100 W
Performance
Frequency Response
50 Hz to 15 kHz ±3 dB
SNR/Noise
70 dBA SNR (Aux Input)
55 dBA SNR (Mic Input)
60 dBA SNR (Tel Input)
THD/Distortion
≤ 1% THD (1 kHz, at Rated Power)
Signal Processing
DSP
No
EQ & Filters
2-Band EQ
Connectivity
Analog Audio I/O
1x Barrier Strip Mute Input
1x XLR 3-Pin Mic Input
3x Barrier Strip Mic Input
3x Stereo 2RCA Aux Input
5x Barrier Strip Speaker Output
2x Barrier Strip Monitor Output
1x Barrier Strip Page/Telephone/PBX Output
1x Stereo 2RCA Aux Output
Digital Audio I/O
No
Network I/O
No
USB I/O
No
Phantom Power
No
Wireless
No
Power
Input Power
120 VAC, 60 Hz
230 VAC, 50 Hz
AC Power Connector
1x IEC
Physical
Display
Single-LED Indicators Only
Dimensions
16.9 x 10.5 x 3.5" / 43 x 26.7 x 8.8 cm
Weight
14.8 lb / 6.7 kg
Packaging Info
Package Weight
12 lb
Box Dimensions (LxWxH)
20.6 x 14.6 x 6.5"

Pyle Home PCM60A Reviews

See any errors on this page?

Is the Aux output a preamp out allowing me to ...

Is the Aux output a preamp out allowing me to send the signal to a QSC Amp?
Asked by: Greg
You can use the aux output on the Pyle Home PCM60A 100W Power Amplifier with 25V/70V Output to send audio to a QSC amplifier.
Answered by: Alex D
Date published: 2025-06-24
  • y_2026, m_10, d_15, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_1464420, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_bhphotovideo
Whatever You Need, We've Got It