APC Smart-UPS RT 20kVA Rackmount Battery Backup & Surge Protector (230V)

BH #APRT20KRMXLI • MFR #SURT20KRMXLI
Print
APC Smart-UPS RT 20kVA Rackmount Battery Backup & Surge Protector (230V)
Key Features
  • Output: 1,600W / 20,000 VA @ 230V
  • Input: 230V / 400V @ 50/60 Hz ±3 Hz
  • 8 x IEC 320 C19 Battery Backup Outlets
  • Dual Mains Input
Protect your high-end network equipment and servers from unexpected power outages with the Smart-UPS RT 20kVA Rackmount Battery Backup & Surge Protector from APC. This 12U rackmount UPS is designed to deliver 16,000W / 20,000 VA power output at 230V to eight IEC 320 C19 outlets. It can run for up to four minutes when at full capacity, providing pure sine-wave power with a double-conversion topography for zero transfer time, and can be recharged in about 2.5 hours. This UPS also supports two separate power sources with a removable input/output wiring tray. The color LCD touchscreen display provides an overview of critical data.
More Details
Special Order
Expected availability: 2-4 Months
No Store Display
$21,230.99

Business Financing Options

Free Standard Shipping
Protect Your Gear
Add a protection plan from $939.99
Ask an Expert
212-444-6615

APC 20kVA Overview

Protect your high-end network equipment and servers from unexpected power outages with the Smart-UPS RT 20kVA Rackmount Battery Backup & Surge Protector from APC. This 12U rackmount UPS is designed to deliver 16,000W / 20,000 VA power output at 230V to eight IEC 320 C19 outlets. It can run for up to four minutes when at full capacity, providing pure sine-wave power with a double-conversion topography for zero transfer time, and can be recharged in about 2.5 hours. This UPS also supports two separate power sources with a removable input/output wiring tray. The color LCD touchscreen display provides an overview of critical data.

Dual Mains Input
This UPS offers increased availability with support for separate hardwired 3-wire (1P + N + E) and 5-wire (3P + N + E) inputs.
LCD Display
The color touchscreen LCD display provides a schematic overview of critical data for guided operation and troubleshooting.
Manageable External Batteries
Monitor the health and status of the external batteries and their expected runtime to reduce preventative maintenance service needs.
Double Conversion Topology
Designed for high-end system components, corporate servers, lab equipment, and other sensitive electronic devices, double-conversion UPS systems provide clean, consistent power regardless of the condition of the incoming power. With technology, the system operates on isolated DC power 100% of the time and has a zero transfer time, since it never has to switch to the battery.
Rack/Tower Convertible
Protect your initial investment in the UPS when migrating from tower to rack-mount environment.
Removable Input / Output Wiring Tray
The removable wiring tray allows for quick installation and maintenance of the UPS.
Single or Three-Phase Input Wiring
Support for single or three-phase input wiring provides flexibility for the UPS installation.
Serviceability
  • User-replaceable batteries
  • Audible alarms
  • Automatic self-test
  • Disconnected battery notification
  • Predictive failure notification
Manageability
  • Remote power management over the network
  • Serial connectivity
  • InfraStruXure Manager compatible
  • LED status indicators
  • SmartSlot
Protection
  • Safety-agency approved
  • Frequency and voltage regulation
  • Cold-start capable
  • Generator compatible
  • Input Power Factor Correction
  • Power conditioning
  • Resettable circuit breaker
Availability
  • Intelligent battery management
  • Scalable runtime
  • Temperature-compensated battery charging
  • Automatic internal bypass for UPS power overload or fault
  • Automatic restart of loads after UPS shutdown
  • Hot-swappable batteries
UPC: 731304255710

APC 20kVA Specs

Key Specs
Total Outlets
8x IEC-320 C19
Maximum Wattage
16000 W
Full-Load Runtime
4 Minutes
General
Total Outlets
8x IEC-320 C19
Protected Outlets
8x IEC-320 C19 (Battery and Surge)
USB Charging Ports
No
SmartSlot Interface
1
Data Line Protection
RJ45
Communications I/O
Serial via DE-9/DB-9
Emergency Power Off (EPO) Support
Yes
Noise Filtering
0.3%
Topology
Double Conversion
Power
Current
15 A
Maximum Wattage
16000 W
Nominal Input Voltage
400 VAC 3PH
Input Voltage Range
160 to 280 VAC
Nominal Output Voltage
230 VAC
Output Voltage Range
220 to 240 VAC
Output Frequency
50/60 Hz ± 3 Hz (Configurable)
Voltage Distortion
<5%
Load Capacity
20,000 VA
Thermal Dissipation
3770 BTU/Hour
Crest Factor
3:1
Waveform
Sine Wave
Battery
Battery Capacity
(20,000 VaH)
Chemistry
Lead-Acid
Full-Load Runtime
4 Minutes
Half-Load Runtime
8 Minutes
Recharge Time
2.5 Hours
Number of Batteries
1
User Replaceable
Yes
Replacement Battery
SRT192RMBPUS
Hot-Swap Support
Yes
External Battery Connection
2x IEC Jumper
Physical
Operating Conditions
32 to 104°F / 0 to 40°C up to 95% Humidity
Noise Level
59 dBA
Certifications
CE
Rackmount Size
12 U
Dimensions (W x H x D)
17.01 x 20.98 x 30.43" / 432.05 x 532.89 x 772.92 mm
Weight
145.5 lb / 66 kg

APC 20kVA Reviews

See any errors on this page?
Whatever You Need, We've Got It