The ikan Blitz 3000 Kit includes the Blitz 1500 transmitter/receiver system and a high-gain antenna that doubles the transmission range to 3000'. The system transmits up to 1080p60 10-bit 4:2:2 uncompressed video with zero delay over the 5.1-5.9 GHz frequency. It features HDMI and 3G-SDI inputs, a 3G-SDI loop-through local output, and HDMI and dual 3G-SDI outputs, allowing you to transmit to two displays at the same time. It supports up to four receivers simultaneously and also allows HDMI/SDI and SDI/HDMI cross-conversion. The transmitter comes with an integrated L-series battery plate and the receiver with a V-mount plate. Batteries are sold separately. Both units can also be powered via 2-pin power ports over included D-Tap to 2-pin LEMO cables.
The ikan Blitz 1500 provides uncompressed, zero-delay, 1080p60 10-bit 4:2:2 transmission up to 1500'. It supports HDMI or 3G-SDI input signals but allows you to cross convert on the receiver end, so an SDI input can be output as HDMI and vice versa. The receiver features a single HDMI and dual 3G-SDI outputs, allowing you to connect to two SDI displays simultaneously. Moreover, a single transmitter can send the signal to up to four receivers at the same time, allowing for long-distance transmission to multiple destinations. The transmitter also offers a 3G-SDI loop-through output for local monitoring.
The system supports four channels of SDI embedded audio. For independent audio when working with an HDMI signal, the transmitter features a 3.5mm audio port. On the output end, both the HDMI and SDI ports support audio output.
The transmitter comes with an integrated L-series battery plate and the receiver with a V-mount plate, and both units have a 2-pin LEMO-compatible port for use with included D-Tap to LEMO cables. With these cables you can run power from the same battery that's powering your camera or from another D-Tap source.
The set operates over the 5.1-5.9 GHz frequency and offers simple up/down channel selection buttons. The two units sync up in about 20 seconds or less after power-on. The onboard LCD screens clearly display the channel, signal type, and resolution.
The Blitz 1500 has a durable machined aluminum design. The transmitter is compact, so it can be mounted on your camera. Both units provide 1/4"-20 and 3/8"-16 mounting threads on the bottom. Additionally, a small add-on mounting accessory is included that screws onto the front of the transmitter to provide an additional 1/4"-20 thread.
- Uncompressed, zero-delay, 1080p60 10-bit 4:2:2 transmission
- Up to 1500' range
- Supports up to four receivers at the same time
- HDMI and 3G-SDI inputs, 3G-SDI loop-through output
- HDMI and dual 3G-SDI outputs
- HDMI/SDI cross conversion
- SDI embedded audio
- Independent 3.5mm audio port
- L-series transmitter battery plate
- V-mount receiver battery plate
- 2-pin LEMO-compatible power ports
- Operates on 5.1-5.9 GHz frequency band
- 1/4"-20 and 3/8"-16 mounting threads
- Machined aluminum housings
This ikan Double Range High-Gain Antenna doubles the transmission distance of the Blitz 1000 Pro to 2000' and the Blitz 1500 to 3000'. It also reduces signal interference from other wireless devices and boosts the reception range to up to 14 dBi. The antenna works plug and play and comes with the necessary hardware to attach it to a light stand. Your Blitz receiver also attaches to this hardware along with the antenna.