Capture HD video and still images at depths to 200' with this Underwater Housing for PowerShot G7 X Mark III Camera. External strobes can be connected through two ports for Ikelite, SEA&SEA, or Olympus-type fiber-optic strobe cords. Any Ikelite DS strobe may be connected using the Fiber-Optic Converter #4401.3 and Fiber-Optic Cord #4501, both sold separately.
The housing comes with a 3" diameter optical glass port that accommodates the camera's full 24-120mm zoom range. A full range of optional, 67mm-threaded macro and wide-angle wet lenses and color filters attach directly to the port, and an optional 6" glass dome can be mounted on the housing to replace the port for wide-angle, macro and over-under shots. Built for durability, the housing is made in the USA from a corrosion-resistant ABS and polycarbonate blend, which is light gray/white on the front, sides, top, and bottom but clear in the back so you can monitor the O-ring seal and rear camera controls. The back panel is removable and allows for easy drop-in camera loading. Operating the shutter is easy thanks to the large curved lever, and if you decide to use the housing with a tray and right-side handle, a shutter-lever extension is available. Rotating controls feature stainless steel, direct-drive mechanisms and soft-touch knobs, while back-panel buttons are made of anodized aluminum with laser-engraved labels that won't fall off or fade. The camera's LCD is fully visible. A 1/2" port permits use of an optional vacuum testing pump, to verify the integrity of the seal before your dive.
- Features a depth rating of 200'
- Two ports for connecting Ikelite, SEA&SEA, or Olympus-type fiber-optic cords
- Constructed by hand in USA from corrosion-resistant ABS and polycarbonate blend, light gray/off-white with clear back
- Color reflects sunlight to keep camera cool and offers better contrast for improved viewing of camera, monitor, and O-ring seal
- Open-groove O-ring design
- 1/2"-20 port for optional vacuum testing pump
- Access to all camera controls except flash pop-up
- Large curved shutter lever for easy operation
- Soft-touch knobs and stainless steel mechanisms for rotary controls, anodized aluminum push buttons
- Engraved back-panel control labels won't fade or fall off
- 1/4-20 threaded tray mounting with 3" spacing
- Slightly negative buoyancy in fresh water
- Built-in flat optical glass lens port with 3" diameter
- Accommodates camera's full 24-120mm zoom range
- Wide-angle and macro lenses, filters, and dome port available separately