The NZXT H710i Mid-Tower Case features a sleek and minimalistic design with plenty of helpful additions for a clean and easy build. Aside from its signature cable management bar, it also has a PSU shroud and a built-in cable management system at the back. It supports up to an ATX motherboard, multiple 3.5" and 2.5" storage drives, and three dual-slot graphics cards. Alternatively, you can install a single dual-slot graphics card vertically using an optional riser cable. Whether you choose to liquid cool or not, the H710i supports up to three 120/140mm fans at the front, a 120/140mm fan at the rear, and another three 120/140mm fans at the top. Thanks to its tempered-glass side panel, you can show off your hardware along with any custom LED lighting. This "i" version of the H710 case includes NZXT's CAM-powered Smart Device, which is a fan and RGB LED lighting control unit, and two addressable LED strips.
- NZXT CAM lighting and fan control device features three 10W fan channels and two RGB LED ports that supports up to four HUE+ LED strips or five Aer RGB/RGB2 fans
- Note: If a splitter is used, fan control is regulated depending on the fan connected to the 4-pin port. Do not use low-noise adapters.
- Front USB 3.1 Gen 2 Type-C port with speeds of up to 10 Gb/s
- Cable management bar and cable routing channels
- Additional 2.5" drive mounting on the top or side of the PSU shroud and behind the motherboard tray
- Removable fan/radiator mounting bracket
- 3 x 120mm Aer F120 rifle-bearing fans included
- 1200 +/- 200 rpm
- 50.42 CFM
- 28 dBA
- 1 x 140mm Aer F140 rifle-bearing fan included
- 1000 +/- 200 rpm
- 68.95 CFM
- 29 dBA