The Cactus Wireless Flash Transceiver V6 from Hensel will wirelessly trigger Nikon, Canon, Pentax, Panasonic, Olympus, and 15 other models from 328 to 886' away, depending on conditions. In fact, many of the flashes that are not on the compatibility list (see features) can be used via the V6's Learning mode. The V6's TTL Pass-Through technology allows you to mount both the V6 and your flash with its TTL connection intact while you remotely regulate power and trigger your slave flashes. In keeping with the V6's status as a transceiver, it has both a mounting foot and a hot shoe, allowing it to be used on camera or as a slave with an untethered flash. The V6 runs on two AA batteries or optional USB or DC power sources.
Currently, more than 30 popular flash models from Canon, Nikon, Pentax, Metz, Nissin, and others have been profiled and pre-installed on the V6. A firmware update also allows control of Panasonic and Olympus flashes. By selecting the pre-installed flash model on the Cactus V6, the photographer can remotely control the flash power output of the selected flash model wirelessly through the Cactus V6. If a flash model is not listed, the V6 may even learn its flash profile and then be able to control the power output of the flash.