The Blue Line Gen2 TriTech Motion Detectors (ISCBDL2) use a combination of passive infrared (PIR) and microwave Doppler radar detection with advanced signal processing. The pet‑friendly (‑WP) models generate alarms for human intruders without generating false alarms for pets. These small unobtrusive detectors are simple to install and do not need field adjustments.
Ask Our Experts866-264-7509
Hello, Log InAccount & Orders
Key Features
- Built-In PIR Motion Sensor
- Microwave Doppler Motion Detection
- Pet-Friendly Setting
- 40 x 40' Coverage Area
The Blue Line Gen2 TriTech Motion Detectors (ISCBDL2) use a combination of passive infrared (PIR) and microwave Doppler radar detection with advanced signal processing. The pet‑friendly (‑WP) models generate alarms for human intruders without generating false alarms for pets. These small unobtrusive detectors are simple to install and do not need field adjustments.
More DetailsBosch ISC-BDL2-WP12G Overview
UPC: 800549224765
Bosch ISC-BDL2-WP12G Reviews
Replace old motion detector so no false alarms
By Shawn
Rated 5 out of 5
Date: 2024-10-08
I kept having false alarms and it was the old motion detector of a different brand. 2nd one that I've replaced with a Bosch and not one issue. And I thought the price was fair too.
Easy to install
By Peter
Rated 5 out of 5
Date: 2018-09-06
Replaced Optex 40 X pri with Bosch Blue Line detectors. Bosch is quite a bit more sensitive and gives better coverage. These are great atributes for a good alarm system. Did not use the tamper portion of the detector. I have a 4 wire lead to the detector. Red to plus, black to neg. and the two other leads to the n/c terminals. Polarity is of no concern as you connect the n/c wires.
See any errors on this page?
can this be wired?
can this be wired?
Yes, this needs to be wired. It cannot be wireless.
Date published: 2021-07-14
what is the input voltage of this device and can ...
what is the input voltage of this device and can it be wired to control 3DC Volts ?
The Bosch ISC-BPR2-W12 featues:
Current: Alarm/Standby: 10 mA at 12 VDC
Operating Voltage: 9-15 VDC
Date published: 2022-05-23
Hi guys, My pad says that I have a fault number 2 ...
Hi guys,
My pad says that I have a fault number 2 which means battery of the sensor is low. I removed it to change the battery, however I can not locate the battery. Is there even one? Any idea to help? Cheers
This is a hard wired motion sensor, there is no battery. My suggestion is to contact the Alarm installer. Low battery can be the backup battery on your panel. or an RF alarm sensor.
Date published: 2020-11-05
