APC Smart-UPS Battery Backup & Surge Protector

BH #APSMT2200US • MFR #SMT2200US
Print
APC Smart-UPS Battery Backup & Surge Protector
Key Features
  • Output: 1920W / 1920 VA
  • Input: 120 VAC at 50/60 Hz
  • 8 x NEMA 5-15R Battery Backup Outlets
  • 2 x NEMA 5-20R Battery Backup Outlets
Designed for servers, point-of-sale, routers, switches, hubs, and more, the Smart-UPS Battery Backup & Surge Protector from APC delivers intelligent and efficient power protection with scalable runtime, allowing users to properly shutdown equipment in the event of power failure.
More Details
Special Order
Expected availability: 4-6 Months
No Store Display
Calculate Shipping
Protect Your Gear
Add a protection plan from $89.99
Ask an Expert
212-444-6615

APC 2200VA Overview

Designed for servers, point-of-sale, routers, switches, hubs, and more, the Smart-UPS Battery Backup & Surge Protector from APC delivers intelligent and efficient power protection with scalable runtime, allowing users to properly shutdown equipment in the event of power failure.

Featuring eight NEMA 5-15R and two NEMA 5-20R battery backup outlets, the UPS can offer scalable backup power with runtimes up to 7 minutes at a full 1920W load and 22 minutes at half 960W load. Each outlet offers 530 joule surge rating, preventing damage caused by power fluctuations. A single NEMA 5-20P plug supports 120 VAC at 50/60 Hz input, driving power to the outlets while also assisting with recharging the internal battery in up to three hours. A multi-function LCD control panel provides you with various functions and assists with providing real-time information at a glance. This UPS is TAA compliant, allowing you to use this within various environments and features a $150,000 Lifetime Equipment Protection policy to ensure proper operation.

Green Mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
LCD Interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with user-friendly navigation keys.
Pure Sine Wave Output
Simulates utility power to provide a high degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
SmartSlot
Customize the UPS' capabilities with optional management cards.
Serial Connectivity
Provides management of the UPS via a serial port.
USB Connectivity
Provides management of the UPS via a USB port.
Disconnected Battery Notification
Warns when a battery is not available to provide backup power.
Audible Alarms
Actively lets you know if the unit is on battery, if the battery is low, or if there is an overload condition.
UPC: 731304305620

APC 2200VA Specs

Key Specs
Total Outlets
8x NEMA 5-15R
2x NEMA 5-20R
Plug Type
NEMA 5-20P
Surge Protection
Yes: 530 Joules
Maximum Wattage
1920 W
Full-Load Runtime
7 Minutes
General
Total Outlets
8x NEMA 5-15R
2x NEMA 5-20R
Protected Outlets
8x NEMA 5-15R (Battery and Surge)
2x NEMA 5-20R (Battery and Surge)
Plug Type
NEMA 5-20P
USB Charging Ports
No
SmartSlot Interface
1
Coax Protection
No
Data Line Protection
RJ45
Communications I/O
USB via USB-A
Serial via RJ45
Emergency Power Off (EPO) Support
Yes
Noise Filtering
0.3%
Topology
Line Interactive
Transfer Time
6 to 10 ms
Power
Surge Protection
Yes: 530 Joules
Maximum Wattage
1920 W
Nominal Input Voltage
120 VAC
Input Voltage Range
82 to 144 VAC
Input Voltage Adjustable Range
75 to 154 VAC
Input Frequency
50/60 Hz ± 3 Hz (Auto Sensing)
Nominal Output Voltage
120 VAC
Output Voltage Range
110 to 127 VAC
Output Frequency
60 Hz ± 3 Hz
Voltage Distortion
<5%
Load Capacity
1920 VA
Thermal Dissipation
275 BTU/Hour
Waveform
Sine Wave
Battery
Chemistry
Lead-Acid
Full-Load Runtime
7 Minutes
Half-Load Runtime
22 Minutes
Recharge Time
3 Hours
User Replaceable
Yes
Replacement Battery
RBC55
Hot-Swap Support
Yes
External Battery Connection
No
Physical
Operating Conditions
32 to 104°F / 0 to 40°C up to 95% Humidity
Noise Level
45 dBA
Certifications
TAA
Cable Length
6' / 1.8 m
Dimensions (W x H x D)
7.7 x 17 x 21.4" / 19.6 x 43.2 x 54.4 cm
Weight
112 lb / 50.8 kg
Packaging Info
Package Weight
134 lb
Box Dimensions (LxWxH)
29 x 22 x 15"

APC 2200VA Reviews

See any errors on this page?
Whatever You Need, We've Got It